Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical All Documents are Correct. |
| 2 | Accepted-Technical | Accepted-Technical All Documents are Correct. |
| 3 | Accepted-Technical 28 1017A NEAR ARYA SAMAJ MANDIR DIBIYAPUR ROAD AURAIYA AURAIYA UTTAR PRADESH 206122 | AURAIYA | UTTAR PRADESH | 206122 | Accepted-Technical All Documents are Correct. |
Tender Value
₹16.0 L
EMD Value
₹1.6 L
Closing Date
13 Apr 2026, 11:00 amClosed
EXECUTIVE OFFICER
NAGAR PANCHAYAT ATSU
Renovation and Beautification Work of Office Nagar Panchayat Atsu, located in Moh. Ram Nagar Ward.
2026_DOLBU_1129309_1
803/E.-N.A.S./N.P.A./2025-26 Date. 19-03-2026-02
Open Tender
Civil Works
Lump-sum
90 days
NAGAR PANCHAYAT ATSU
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,888
EXECUTIVE OFFICER
₹1.6 L
NAGAR PANCHAYAT ATSU
29 Apr 2026
31 Mar 2026
13 Apr 2026
31 Mar 2026
13 Apr 2026
31 Mar 2026
10 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Demolishing brick work manually/bymechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar. | |||||
| 2M-150 Brick work in1:4 cement and course sand mortor in pilinth and foundation including supply of all material labour & T&P as per SI No -305 Toilet wall | |||||
| 320mm cement plaster 1:3 (1cement :3 coarese sand ) finished whith 3mm thick flotion coat of neat cement S.i ) 13.9 out side wall | |||||
| 4Providing and fixing partition upto celing height consisting of G.I frame and re3quired board including providing and fixing of frame wosrk made of special section power pressed/roll form G.I sheet with Zinc coation of 120 ms/sqm(both side inlusine) consisting of floor and ceiling channel 50mm wide having wqual flanges of 32 mm and 0.50mm thick fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastenr of 12.5 mm dia meter 50mm length or suitable anchor of engieer in charge all complete. DSR No 9.105.1 | |||||
| 5Providing and fixing, in position concealed G.I section for wall paneling using borad o frequied thickess fixed ont the W Profile(0.55mm thick having a knurled web of 51.55mm and two flanges of 26 mm each with lips fo 10.55mm, placed @ 610 mm c/c in perimetr channel having one flange of 20 mmand another flange of 30 mm withfully threaded self tapping dry wall screwes.Board is fixed to the W prfile with 25mm countersunk ribbed head scres @ 200 mm c/c all coplete as per the frawing & dirction sot engieer in charge the joints of the boards are finished with specially formukated in all complete.9.133.1 | |||||
| 6Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately | |||||
| 7Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron DSR V 2 21.1.2.3 | |||||
| 8Providing ,assembling and supplying vision glass pannels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified,Comprising of an outer heat strengthened float glass 6mm thick,of approved colour and shape with reflective soft coating on surface # 2 of approved colour abd shade ,an inner Heat Strengthned clear directed by the Engineer-in-charge.dsr 2016 item no 25.3 | |||||
| 9Supply and fixing of Unbranded Rectangular Matt Tress Name Plate 18 Inch 6 Inch NA (np186) etc all complet as per gem portal rate. | |||||
| 10Supply and fixng wall fan | |||||
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.42 MB
BOQ_2112379.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .