RENOVATION OF SNCO s MESS AT AF STATION AT CHIMNEY HILLS

Amount

B/R WORKS :- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM 1 :4 complete all as specified and directed.

Material and labour glazed ceramic coloured tiles (premium quality) 300x200x6-7mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10 mm thick cement plaster in CM 1 :4 complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed in CM 1 :6 complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for joint free non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1 :6 complete all as specified and directed.

Material and labour Machine cut kota stone slab flooring 20-25 mm thick over 20mm thick screed bed in CM 1 : 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick plaster in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed,

Material and labour chequerred cement concrete tiles with grey cement and pigment 30 cm x30cm x 22 to 25mm thick set , jointed and pointed in neat cement slurry in floor over 20 mm thick screed bed in CM 1 :4 complete all as specified & directed.

Material and labour chequerred cement concrete tiles bullnosed 32cm x19.85 cmx 20 mm thick,with grey cement and pigment, as in tread over 15 mm thick in CM 1:4 complete all as specified and directed.

Demolition of stone slab and tiles of any description complete all as specified.

Material and labour Machine cut cudappah stone slab 20-25mm thick over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and Fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled/welding for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

Supply and Fix 1 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Material and labour Refastening and securing ends of balusters, newels, rag bolts, angles, etc., let into stone and grouted in cement mortar including recutting the mortices and regrouting in cement mortar all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

Material and labour PCC 1:3:6 type C2,using 40mm graded stone aggregate, 75 mm thick laid as in plinth protection/paving etc finished even & smooth with out usnig extra cement all as specified and directed.

Material and labour for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate complete all as specified and directed.

Material and labour 40 mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in sub floors complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specifically provided for, reinforcement cut as required to facilitate demolition complete all as specified and directed.

Material and labour RCC 1:2:4 type B1 using 20mm graded stone aggregate , providing precast ce ment concrete in cement mortar 1:4 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

Material and labour precast cement concrete block masonry type C-1 1:3:6 , using 20 mm graded stone aggregate with solid block, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Material and labourfor Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition and breaking up drain pipe of any description up to 150mm dia including demolition of cement concrete bedding and hunching complete all as specified and directed.

Demolition and breaking up drain pipe of any description up to 200mm dia including demolition of cement concrete bedding and hunching complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for PVC pipe 110mm bore all as specified and directed.

Material and labour for PCC 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for PVC pipe 160mm bore all as specified and directed.

Supply and fix 160 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth in hard/ dense soil and getting out all as specified and directed.

Material and labour Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

Material and labour cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and directed.

Material and labour in providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Demolition of cement concrete tiles or terracing tiles,brick tiles of any description, single layer on roof complete all as specified and directed.

Material and labour cement concrete type B1 , 1:2:4, 20 mm graded stone aggregate average thickness of 50 mm on RCC roof slab complete all as specified and directed.

Material and labour applying oil bound bitumen primer @ 0.20 kg/Sqm and providing 4 mm thick APP modified water proofing membarne weighing not less than 4.0 Kg/sqm reinforced with non polyester matt weighing not less than 160 gms/Sqm having softening point not less than 150 centigrade, having tensile strength of 650N/Sqcm and 350N/Sqcm in longitudinal and transvers directions respectively of the reinforcement tearing strength of 180 N by torch application including minimum 10 cm side over lap and 15 cm end lap and over the membrane finishing with solar reflective bituminous aluminium paint @ 0.1kg/Sqm complete all as specified and directed.

Disconnecting existing tanks Exc 500 and n.exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and repairing if any required all as specified and directed.

Disconnecting existing tanks exc 1000 and n.exc 2000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and repairing if any required all as specified and directed.

Supply and fixing in repairs ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

Dismantling water tanks and supply and fix 1000Ltr capacity rotational moulded polythene water storage tank (Cylinderical/ vertical with closed top)hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and directed.

Dismantling water tanks and supply and fix 500Ltr capacity rotational moulded polythene water storage tank (Cylinderical/ vertical with closed top)hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and directed.

Supply and fixing 25 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) all as specified and directed.

Supply and fixing 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) all as specified and directed.

Material and labour for repair to RCC chajja/facia/fins, roof projection by removing loose concrete including cleaning of exposed reinforcement with wire brush and cutting/removing of rusted unserviceable reinforcement if any and providing new reinforcement inserting/welding or binding of reinforcement , applying a coat of Fosroc chemical - Nito bond ( for bonding of old & new cone) and provn of RCC 1:2:4 type B0, finishing surface even and smooth with applying 2 coats of Cement base paint over a coat of primer complete all as specified and as directed. Note : formwork or scafolding as required at site is deemed to be included in the rate quoted.

Material and labour Reinforced cement concrete M-25, as in foundations, including rafts, footings, foundation beams, plinth beams,bases for columns, etc, basement slabs, under-reamed piles and mass concrete all as specified and directed.

Material and labour Reinforced cement concrete M-25 , as in Columns, pillars, piers, posts and struts all as specified and directed.

Form work to sides of concerte, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter at fair finished flat concrete surfaces complete all as specified and directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips all as specified and directed.

TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fix mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long of diameter of neck exc 12mm but n.exc 20mm complete all as specified and directed.

Supply and fix plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment of Fe-290 (Gde-E165) complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W(Gde-E-250) quality-A complete all as specified and directed.

Supply and fix Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix polycarbonate sheet of approved make & brand conforming to IS:14443-1997 and having 50 micron UV protection layer certification, fitted and fixed with 60 mm wide aluminium channel section top and bottom member in dry glaze sandwitch system, (unit wt. of top and bottom members : 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer "C" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without puncturing the polycarnonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufactureres specification and direction of Engineer-in-Charge. ( Payment to be made on area of finished work). In Roof :- Natural/Blue/Green/Bronze/Opal/Metallic grey colour with 2 wall 10 mm overall thickness (wt. 1.70kg/sqm, Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200mm) complete all as specified and directed.

Supply and fix pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Material and labour applying two coats of synthetic enamel plaint on new or previously untreated steel surfaces of any description over 10 cm in or grith, not otherwise described, over a coat of red oxide primer, including preparation of surface complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming, in layers, not exc 25 cm of hard/dense soil complete all as specified and directed.

Removing of excavated materials n.exc 50M and deposing where directed at a level n.exc 1.5M above the statring point complete all as specified and directed.

Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix in repair vitreous china water closet Orissa pattern of size 580 x 440mm with P or S trap of size 110/110mm incluiding provn of lime concrete bedding complete all as specified and directed.

Supply and fix in repair vitreous china washdown water closet pedestal pattern white with P or S trap SIZE 110/110mm and plastic water closet seat cover incluiding fixing bolts etc complete all as directed.

Supply and fix in repair plastic water closet seat,white closet pattern with flat bottom,and cover and mild steel chromium plated or Aluminised hinging device complete all as specified and directed.

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair vitreous china flat back white WHB size 550 X 400 mm including fixing of brackets with wooden plugs and bolts etc, and waste pipe including fixing of 15 mm bore CP Brass pillar tap fancy type long shank, making good etc complete all as specified and directed.

Supply and fix stainless steel kitchen sink 1mm thick of size 800x800x300mm , single bowl with plugs, washers and waste fittings and waste pipes etc ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,complete all as specified and directed .

Supply and fix in repair kitchen sinks made of stainless steel 1mm thick with plug washer and waste pipe including bedding including fixing cantilver brackets and connection union to pipe over all size 915mm x 460mm bowl size 410x330x160mm complete all as specified and directed.

Supply and fix in repair PVC LDPE waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes complete all as specified and directed.

Taking down unserviceable PVC low level flushing cistern and supply and fix new PVC valveless ,symphonic action type flushing cistern 10 ltr capacity, white with inlet ,ball valve ,float and handle incluiding brackets complete all as specified and directed.

Supply and fix in repairs Chromium Plated Jet Spray/Health faucet with 1.0 mtr 15mm bore PVC Tube and hook all as specified and directed. MAKE:JOHNSON/JAGUAR /ESSCO CAT NO -547

Supply and fix in repairs two way bib cock 15 mm chromium plated complete all as specified and directed.

Supply and fix in repair vitreous china bowl type urinal complete of size 430 x 370 x 340 mm size incluiding providing and fixing lugs bedding urinal in walls in CM 1:2 ,screwing urinal in plug with and incluiding 60mm long brass screw, pointing around urinal back in cement mortar etc complete all as specified and directed.

Supply and fix in Brass chromium plated shower rose with swival joints 125mm size complete all as specified and directed.

Supply and fix in repairs angular stop cock chromium plated 15 mm dia complete all as specified and directed.

Supply and fix in repair pillar tap 15mm dia ,cast copper alloy with capstan head ,chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 15 mm bore CP bib taps cast copper alloy with crutch or butterfly handles screwed down for iron pipes complete all as specified and directed.

Supply and fix in repair 15 mm bore CP fancy type bib taps cast copper alloy with crutch or butterfly handles screwed down for iron pipes complete all as specified and directed.

Supply and fix in repairs brass chromium plated, tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets complete all as specified and as directed.

Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix in repair PTMT grating doom 125 mm dia (minimum wt 40gms) complete all as specified and directed.

Supply and fix in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Supply and fix 15 mm bore mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Supply and fix 20 mm bore mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Supply and fix 25 mm bore mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Refixing 15 mm dia bore old steel tubing and connections in new or old position (Walls, ceiling, floors) etc. complete all as specified and directed .

Refixing 20 mm dia bore old steel tubing and connections in new or old position (Walls, ceiling, floors) etc. complete all as specified and directed .

Refixing 25 mm dia bore old steel tubing and connections in new or old position (Walls, ceiling, floors) etc. complete all as specified and directed

Supply and fix in repairs 20mm bore dia Gate valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipes single socketed of any length with rubber rings joints 75mm dia laid in floors complete all as specified and directed .

Supply and fix in repair PVC (SWR) pipes single socketed of any length with rubber rings joints 75mm dia fixed to walls complete all as specified and directed .

Supply and fix in repair PVC (SWR) pipes single socketed of any length with rubber rings joints 110mm dia laid in floors complete all as specified and directed .

Supply and fix in repair PVC (SWR) pipes single socketed of any length with rubber rings joints 110mm dia fixed to walls complete all as specified and directed

Supply and fix stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall for 110mm dia pipe complete all as specified and directed.

Supply and fix stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall for 75mm dia pipe complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends with access door of any radius complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends with access door any radius complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC holdfast block all as specified and directed.

Taking down shutters of any description exc 1sqm and n exc 2 sqm each complete all as specified and directed.

Material and labour for making good under cills or over arches, lintels incl all pinning when necessary in Cement mortar 1:6 complete all as specified and directed.

Supply and fix 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix steel windows with side hung shutters including box type hinges, with steel handle and steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of red oxide primer all as specified and directed.

Material and labour for providing plain cement concrete 1:3:6 Type C0 using 12.50 mm graded stone aggregate as in filling hollow of pressed steel frame/chowkats complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead complete all as specified and directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Supply and fix GI wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.00mm and fixed with screws or galvanised staples all as specified and directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fix aluminium, anodized, barrel tower bolts 150mm of extruded section complete all as specified and directed.

Supply and fix 100 mm anodised extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, 100mm size all as specified and as directed.

Supply and fix 100mm size handles of stainless steel fixed with screws complete all as specified and directed.

Supply and fixing in repairs aluminium handles, cast type, anodized 150mm complete all as specified and directed.

Supply and fix 2nd class hard wood glazed and skeleton ventilator / window shutters 30mm thick open rebated and prepared to receive glass, etc of framing plain, chamfered or rounded but divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and directed.

Taking down Anodised Aluminium frame for doors, windows, ventilators and partitions etc any description complete all as specified and directed.

Supply and fix powder coating anodised Aluminium frame for doors, windows, ventilators and partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws, glazing clips etc. complete all as specified and directed.

Supply and fix sheet glass,5.5 mm thick ordinary quality and glazing with oil putty or as required on site square exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

Material and labour for 18mm / 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fix auto concealed hydraulic steel spider/butterfly hinges suitable for cupboards complete all as specified and directed.

Material and labour for extra over rates of block board or veneered particle board size 18/19mm thick for external teak wood lipping, 6mm thick fixed with nails all as specified and directed.

Removing of old/unserviceable curtain rail complete and Supply and fixing aluminium powder coated, fancy type, curtain rod of size 20-25 mm dia, including fixing brackets, end stops etc, complete all as specified and directed.

Supply and fix in repair Door closer aluminium (extruded section) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

Supply and fix125mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws ,all as specified and directed.

Racking out joints of pointing to squared rubble masonry, coursed or uncoursed stone masonry cement or cement lime mortar complete all as specified and as directed

Material and labour rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces mixing of integral water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement all as specified and directed. Note : Supply only wpc shall be measured & paid separately.

Supply only Integral waterproofing compound all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for key scrubbing down with water all as specified and directed.

Material and labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in Cement Mortar 1:3 complete all as specified and as directed.

Material and labour rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface including two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

Material and labour Preparation of newly plastered surfaces of walls and applying 3 coats of white wash all as specified and directed.

Complete removal of existing treatment and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface including two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on ceiling surfaces and applying two coat of Oil bound distemper over a coat a primer including preparation of surfaces complete all as specified and directed.

Preparation of old decorated surface of walls chajja, facia, column and roof projections and applying two coat of Exterior emulsion paint (weather coat) complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash all as specified and directed.

Material and labour for applying one coat of white wash on ceiling all as specified and directed.

Material and labour for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall including removal of vegetation and applying one coat of cement base paint complete all as specified and directed.

Material and labourfor preparation of old painted wooden surface of wood and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted surface of steel or iron work over 10cm in width or girth of any description and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Material and Labour for point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable wire to be drawn in and including PVC conduit of suitable size complete with all accessories including MS sheet metal 1.2mm thick switch board with hylum sheet cover or PVC rectangular switch board of suitable size to be fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as directed by Eng -in Charge

One light/fan point controlled by one, one way switch 5 Amp complete

One light point controlled by two 2-way switches

One three pin socket outlet 5 Amp controlled by one, one way switch on independent board

One 3 pin sockt outlet 5 Amp on the same board with other switch

All as per srl item No 152 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in earth conduity conductor.

Supply and fix Modular switch 1 way 6A,1 module complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A,1 module complete all as specified and as directed.

Supply and fix Modular socket 6A 2 /3 pin combined 2 module all as specified and as directed.

Supply and fix Modular socket 6/16A 2 /3 pin combined 2 module complete all as specified and as directed.

Supply and fix Modular switch 2 way 6A,1 module complete all as specified and as directed.

Supply and Fix ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed .

Supply and fix modular fan regulator, 120W - 2 module for ceiling fan 1200 /1400 mm sweep complete all as specified and as directed .

Taking down ceiling/wall mounted/exhaust fan of any type, make and size, after dis-connecting cable ends, refixing the same with suitable fastners after completion of building work including minor servicing i.e. cleaning, greasing, oiling, painting, etc. complete all as specified and directed .

Supply and Fix in replacement REGAL Batten for LED tube with single LED Lamp 1x 22 w,complete with all accessories prewired including crystal glass LED tubelight (double side connection), Make: Havells Model No REGALBATTENT8UPTO1X22WSSBSWH for frame and CRYSTAL1213T8DSTL20WLED865SGLASS for tube or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix in replacement of surface and wall mounted LED batten with aluminium housing & integrated electronic driver of 10 watt (2 ft) Make:Havells Model No LUMILINEPLUSBS10WLED865SPCSS or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix lamp holder, PVC/polycarbonate type with back plate suitable for batten fittingscomplete all as specified and as directed .

Material and labour for replacement of Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Three runs of 4 sq mm cable and one run of PVC conduit / casing caping shall be measured as one unit length.

Material and labour for replacement of Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 6 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Three runs of 6 sq mm cable and one run of PVC conduit / casing caping shall be measured as one unit length.

Supply and Fix in replacement of distribution boards protection class IP-43, 240 V, double door suitable for mounting MCB with min 200 Amps rating bus bar SPN 08 way complete all as specified and as directed.

Supply and Fix in replacement of distribution boards protection class IP-43, 240 V, double door suitable for mounting MCB with min 200 Amps rating bus bar SPN 04 way complete all as specified and as directed.

Supply and Fix replacement TP&N vertical loadline DB fitted with bus bar capacity upto 250 A, double door, neutral link, blanking plate (without MCBs) suitable for MCCB as incomer and MCB as outgoing, protection class IP-43, double door, 4 way complete all as specified and as directed.

Supply and fix in repairs MCB SP 06 to 32 Amps 240 volts, 50 Hz, 10KA, AC supply complete all as specified & directed .

Supply and fix in repairs MCB SP 40 Amps 240 volts, 50 Hz, 10KA, AC supply complete all as specified & directed .

Supply and fix in repairs MCB SPN 32 Amps 240 volts, 50 Hz AC complete all as specified & directed .

Supply and fix in repairs MCCB 125 amps, 415 volts , 3 pole, 50 HZ, 16 KA including spreader links on both sides complete all as specified & directed .

Supply and fix in replacement of GI pipe bracket 40 mm dia medium grade not exceeding 1.2 mtrs long bend to shape suitable for fixing building security light on wall/beam including suitable size MS clamps, bolts, nuts, washers, etc complete all as specified & directed .

Supply and Fix in replacement LED building security light 35 W, IP 65 Make: Havells Model No ENDURACITYLITEPLUSSL35WLED757SASYBOPC or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and fix in repairs MCB protected socket, 3 module AC box modular, concealed type with plug and MCB SP 25 Amp (sheet metal) mini Make: Standard cat part No DSDMCSN0251025 or equivellent model of Make specified in List of Manufacturers, complete all as specified & directed .

Supply,Laying and testing in trenches / fixed to wall/ drawn in conduit /laid in floor XLPE insulated armoured PVC bedded cable 1100V grade with aluminum conductor of cross sectional area 2 core 10 Sq mm complete all as specified & directed .

Supply,Laying and testing in trenches / fixed to wall/ drawn in conduit /laid in floor XLPE insulated armoured PVC bedded cable 1100V grade with aluminum conductor of cross sectional area 4 core 25 Sq mm complete all as specified & directed .

Supply,Laying and testing in trenches / fixed to wall/ drawn in conduit /laid in floor XLPE insulated armoured PVC bedded cable 1100V grade with aluminum conductor of cross sectional area 3.5 core 35 Sqmm complete all as specified & directed .

Taking down old LT UG cable 25/ 35 Sqmm complete all as specified & directed .

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in hard/dense soil laying/ replacement of UG cable etc n exc 1.5m wide and not exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Supply and lay brunt bricks class 'B' of standard size in trenches for protection of UG cable all as specified and directed.

Labour for riddled earth done through by riddle of excavated soil and spread the same as 23 cm layer on below and upper part of the cable as cable cushioning to UG cable all as per clause 19.75 of SSR part -I all as specified and directed.

Supply and lay GI tubing light grade, 40mm dia for road crossing/laid in floors/cable protection etc complete all as specified and directed.

Supply and Fix exhaust fan, AC, single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed . Make : Havells model name Pacer or equivellent model of Make specified in List of Manufacturers complete all as specified and as directed .

Supply and Fix ceiling fan complete 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and as directed . Make : Havells model name Ventil Air - DS or equivellent model of Make specified in List of Manufacturers

Supply and Fix Bollards fittings 8 watt, IP 65, diffuser at the upper portion acts as a beacon of path guidance and necessary PCC foundation (of size 20x20x20 cm type C1 using 12.5 mm graded stone aggregate) for fixing including necessary cable connections all as directed. Make : Havells cat part No CONEBL8WLED857SSYMTOPC or equivellent model of Make specified in List of Manufacturers complete all as specified and as directed .

Supply and Fix Robust high bay/medium bay LED 80 watt, IP 65 luminaire with high efficacy complete all as directed. Make : Havells cat part No BAYBRITESAUCERHBP80WLED75760DTOLTG or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply only LED bulb 7 watt suitable for B 22 holder complete all as specified and as directed .

Cutting hole on stone masonry wall suitable to fix exhaust fan of size 300 mm sweep and making good the disturbed surfaces complete all as specified and as directed .

Supply and Fix surface mounting LED flat panel, 34 W, 2" X 2" size, aesthetically designed and glare free symmertical illumination and all as specified and directed Make: Havells cat part No PLUTOSURFACE2X2PLS34WLED840S or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix surface mounted down light with white powder coated poly carbonate housing and pressure die cast heat sink having high efficiency, 10 watt and all as specified and directed Make: Havells cat part No INTEGRANEOSURFACEDLS10WLED830S or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.196 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 5 of SSR Part-I and testing on completion.

shashi shekar construction

Gnani Builders

SREE BUILDERS

VARGHESECHACKOandCo

devan enterprises