Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
23 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CTL
15 conditions · 4 needing a document upload
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work- "Any civil engineering work involving construction of RCC framed building(s). The cost component of RCC building(s) shall be at least 30% of tendered value. Note:- Special condition of contract for electrical work: The contractor shall get the work executed through electric license holder agency and shall get the work inspected and certified from Railways nominated Electrical Engineer as per direction of Engineer in charge.)."
16 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be Submitted Along with Tender: (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(b)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(c)Partnership Firm: (i) All documents as mentioned in Para18 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 andPara17 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip
(d)Joint Venture (JV): All documents as mentioned in Para 17 of the Tender Form (Second Sheet)of General Conditions of Contract-2022 and Para16 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(f)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (v)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract- 2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip. (iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Sole proprietor/a company or a partnership firm/joint venture (JV)/registered society/registered trust / HUF/LLP, Power of Attorney etc: The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and f\lather to dealwith the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shallbe summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with allother contractualactivities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
1. Construction of New Office Building at RPF Outpost Sewagram along with 05- bedded RPF Barrack under the jurisdiction of ADEN (S) Sub-Division in Nagpur Division in PH-64 in PWP 2025-26. 2. Construction of New Office Building at RPF Outpost Warora, along with 05-bedded RPF Barrack under the jurisdiction of ADEN (Warora) Sub-Division in Nagpur Division in PH-64 in PWP 2025-26.
DRMWNGP-32-2026-03
DRMWNGP-32-2026-03
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹2.4 L
23 Apr 2026
26 Mar 2026
9 Apr 2026
100 items across 3 schedules · ₹98,62,870.08 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 300 | 177.5 | 53,250 |
| 2 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 50 | 352.15 | 17,607.5 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 300 | 196 | 58,800 |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 500 | 17.6 | 8,800 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 35 | 7,878.5 | 2,75,747.5 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 75 | 7,294.7 | 5,47,102.5 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 85 | 392.15 | 33,332.75 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 375 | 927.25 | 3,47,718.75 |
| 9 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 360 | 736.4 | 2,65,104 |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 250 | 961.3 | 2,40,325 |
| 11 | Stairs, (excluding landings) except spiral- staircases | Sqm | 10 | 764.95 | 7,649.5 |
| 12 | Under 20 cm wide | Metre | 28 | 208.55 | 5,839.4 |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 6000 | 107.85 | 6,47,100 |
| 14 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 5200 | 107.85 | 5,60,820 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 75 | 9,504.75 | 7,12,856.25 |
| 16 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 120 | 9,860.4 | 11,83,248 |
| 17 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | 160 | 6,295.15 | 10,07,224 |
| 18 | Area of slab upto 0.50 sqm | Sqm | 22 | 5,413.5 | 1,19,097 |
| 19 | Area of slab over 0.50 sqm | Sqm | 14 | 5,136.3 | 71,908.2 |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 61 | 1,267.95 | 77,344.95 |
| 21 | Second class teak wood | cum | .9 | 1,42,949.7 | 1,28,654.73 |
| 22 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 18 | 3,473.85 | 62,529.3 |
| 23 | Fixed to steel windows by welding | Kg | 450 | 219.1 | 98,595 |
| 24 | With 12 mm mild steel U beading | Sqm | 28 | 939.2 | 26,297.6 |
| 25 | 125x65x2.12 mm | Each | 31 | 55.75 | 1,728.25 |
| 26 | 300x16 mm | Each | 7 | 216.55 | 1,515.85 |
| 27 | 250x10 mm | Each | 7 | 83.9 | 587.3 |
| 28 | 300x20x6 mm | Each | 7 | 98.35 | 688.45 |
| 29 | 125 mm | Each | 14 | 39.95 | 559.3 |
| 30 | 125x75x4 mm | Each | 8 | 150.1 | 1,200.8 |
| 31 | 300x16 mm | Each | 8 | 303.25 | 2,426 |
| 32 | 300x10 mm | Each | 4 | 130.1 | 520.4 |
| 33 | 125 mm | Each | 22 | 66.25 | 1,457.5 |
| 34 | Single rubber stopper | Each | 11 | 39.6 | 435.6 |
| 35 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 15 | 570.95 | 8,564.25 |
| 36 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 9 | 3,720.75 | 33,486.75 |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 350 | 133.7 | 46,795 |
| 38 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 450 | 123.6 | 55,620 |
| 39 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 200 | 772.4 | 1,54,480 |
| 40 | Ordinary cement without any pigment | Sqm | 50 | 1,056.35 | 52,817.5 |
| 41 | Size of Tile 600x600 mm | Sqm | 370 | 1,553.45 | 5,74,776.5 |
| 42 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 43 | 110 mm | Each | 5 | 136.15 | 680.75 |
| 44 | 110x110x110 mm | Each | 5 | 234.15 | 1,170.75 |
| 45 | 110 mm bend | Each | 5 | 150.35 | 751.75 |
| 46 | 110 mm Shoe | Each | 5 | 131.85 | 659.25 |
| 47 | 110 mm | Each | 20 | 371.3 | 7,426 |
| 48 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | Each | 5 | 54.7 | 273.5 |
| 49 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 30 | 738.65 | 22,159.5 |
| 50 | 1:4 (1 cement: 4 fine sand) | Sqm | 240 | 347.05 | 83,292 |
| 51 | 1:4 (1 cement: 4 fine sand) | Sqm | 800 | 399.45 | 3,19,560 |
| 52 | 1:4 (1 cement: 4 fine sand) | Sqm | 482 | 471.35 | 2,27,190.7 |
| 53 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 600 | 262.7 | 1,57,620 |
| 54 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 600 | 185.65 | 1,11,390 |
| 55 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 391 | 160.6 | 62,794.6 |
| 56 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 50 | 170.7 | 8,535 |
| 57 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Sqm | 1 | 1,090.65 | 1,090.65 |
| 58 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 10 | 263.95 | 2,639.5 |
| 59 | Moorum | cum | 400 | 768.25 | 3,07,300 |
| 60 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 6,767.4 | 13,534.8 |
| 61 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 1 | 6,515.55 | 6,515.55 |
| 62 | Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern | Each | 1 | 9,612.4 | 9,612.4 |
| 63 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 2 | 2,226.35 | 4,452.7 |
| 64 | 610x460 mm bowl depth 200 mm | Each | 1 | 3,873.8 | 3,873.8 |
| 65 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 1 | 349.15 | 349.15 |
| 66 | 32 mm dia | Each | 3 | 119.55 | 358.65 |
| 67 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 3 | 53.25 | 159.75 |
| 68 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 2 | 1,607.95 | 3,215.9 |
| 69 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 2 | 1,083.5 | 2,167 |
| 70 | Vitreous china | Each | 2 | 546.35 | 1,092.7 |
| 71 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 2 | 115.3 | 230.6 |
| 72 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | Each | 3 | 367.1 | 1,101.3 |
| 73 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 1 | 231.95 | 231.95 |
| 74 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 2 | 673.4 | 1,346.8 |
| 75 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 2 | 708.95 | 1,417.9 |
| 76 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with1/2" BSP thread and shapes, weighing not less than 60 gms. | Each | 1 | 107.2 | 107.2 |
| 77 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms | Each | 1 | 175.4 | 175.4 |
| 78 | 50 mm nominal dia Pipes | Metre | 250 | 934.15 | 2,33,537.5 |
| 79 | 15 mm nominal dia Pipes | Metre | 100 | 497.8 | 49,780 |
| 80 | 20 mm nominal dia Pipes | Metre | 150 | 537.6 | 80,640 |
| 81 | 25 mm nominal dia Pipes | Metre | 200 | 627.25 | 1,25,450 |
| 82 | 25 mm nominal bore | Each | 2 | 622.4 | 1,244.8 |
| 83 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 3000 | 11 | 33,000 |
| 84 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 4 | 125.6 | 502.4 |
| 85 | 15 mm nominal bore, 122 mm long, weighing not less than 99 gms | Each | 3 | 161.2 | 483.6 |
| 86 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 2 | 118.5 | 237 |
| 87 | 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Each | 2 | 224.1 | 448.2 |
| 88 | 125 mm nominal dia with 25 mm waste hole | Each | 4 | 51.85 | 207.4 |
| 89 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 2 | 156.9 | 313.8 |
| 90 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 1 | 121.4 | 121.4 |
| 91 | 300 mm dia. R.C.C. pipe | Metre | 50 | 994.3 | 49,715 |
| 92 | Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | Each | 1 | 2,890.1 | 2,890.1 |
| 93 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 250 | 530.9 | 1,32,725 |
| 94 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 195 | 634.45 | 1,23,717.75 |
| 95 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 35 | 1,505.25 | 52,683.75 |
| 96 | Upto 5mm depth and 5 mm width | Metre | 80 | 96.75 | 7,740 |
| 97 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 10 | 617.05 | 6,170.5 |
| 98 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 10 | 8,042.3 | 80,423 |
| Schedule total | ₹98,59,990.08 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
PCECIR_1.PDF
ATTACHMENT
PCECircular208Mixdesignlimits.pdf
ATTACHMENT
Tender Document
ATTACHMENT
32-2026-03ConstnofNewofficebuildingatRPFoutpostSEGMWRR.pdf
ATTACHMENT
32-2026-03ConstnofNewofficebuildingatRPFoutpostSEGMWRR.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .