Providing UPS wiring to reprographic unit, providing heavy duty exhaust fans in thesis rooms GF and 1F, replacement of existing faulty LED light fixture and allied electrical works in the JRD TATA library at IISc, Bangalore

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition Note: The model of light fittings to be match with existing lights --LED round down light 18W Make: Philips, Crompton, Havells

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps,Power LED swith CCT6500 degree K,CRI>70%. efficacy>100 lumen per W,120 degree beam spread, life>25000 burning hours and Compliance to IS10322/IEC 60598, LM79&LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HFelectronic driver integrated in a separate control gear assembly., with PF>0.95, power loss should<5%of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%,Life as per LM79. The operating input voltagE should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition. Supply of LED modular down light 2'x2' 36 W- Suitable for recess mounting-6500K Note: The model of light fittings to be match with existing lights Make: Philips, Crompton, Havells

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Note: The rates shall include the erection of light fiiting in the double height area with the height upto 7 mts, necesarry scofolding/required tools and manpower shall be considered for quoting the rates. no extra payements shall be made for the work

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) Make: Crompton, Almonard, Havells

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A.ceiling rose with sufficient length of 23/0.0076i nch PVC insulated twin core wire.

Providing MS sheeet (angle / flat)

Fabrication & welding of MS angle / flat including of hiring welding machine, all consumables , fastners including painting for fixing of heavy duty exhaust fan in the window niche/ places as per Engineer In charge instructions.

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 20 mm

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 20 mm

Supplying and fixing of heavy gauge PVC Conduit Pipe mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall/ floor and fixing by bracing U or J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick Make : VIP / Precision / Polycab/AKG/BEC

Supplying and fixing of heavy gauge PVC Conduit Pipe mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall/ floor and fixing by bracing U or J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick --Make : VIP / Precision / Polycab/AKG/BEC

Supplying and Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs --1.5 mm2 --Make: Finolex, Polycab, Havells

Supplying and Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs ---2.5 mm2 --Make: Finolex, Polycab, Havells

Supplying and Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs ---4.0 mm2 --Make: Finolex, Polycab, Havells

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A one way Switch ---Make : Northwest (Artisa)/ Anchor Panasonic (Vision)/ Crabtree (Murano)/ Legrand (Arteor) / Schneider (Zen Celo)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A three way socket-- Make : Northwest (Artisa)/ Anchor Panasonic (Vision)/ Crabtree (Murano)/ Legrand (Arteor) / Schneider (Zen Celo)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 A One Way Switch-- Make : Northwest (Artisa)/ Anchor Panasonic (Vision)/ Crabtree (Murano)/ Legrand (Arteor) / Schneider (Zen Celo)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.--- 6/16A Universal Socket-- Make : Northwest (Artisa)/ Anchor Panasonic (Vision)/ Crabtree (Murano)/ Legrand (Arteor) / Schneider (Zen Celo)

Supplying and fixing surface / flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick / C.Cwall, including necessary rawl plugs, Machine / NF screws etc., complete. -- 6 Way

Supplying and fixing surface / flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick / C.Cwall, including necessary rawl plugs, Machine / NF screws etc., complete. -- 10-12 Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ---8 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 8 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 10-12 Module

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.....12 Way SP & N- Double door ---Make: Legrand, L&T, Schneider

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898....6-32Amps SP ...Make: Legrand, L&T, Schneider

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898....40 A DP ...Make: Legrand, L&T, Schneider

Supplying and fixing of AC type RCBO on existing MCB distribution board using necessary fixing materials, C curve, capacity of 10 KA and complete wiring as required confirming ot IEC 60947 40A double pole RCBO, 240 V, 30mA sensitivity Make: Legrand, L&T, Schneider

Supply and fixing single pole blanking plate in the existing MCB DB complete etc., as required

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and installation of RUBBER MAT 1 mtr x 1 mtr - 1O mm thick. Complete including cost of materials, labour, usage charges of machinery complete as per specifications.

Providing MS sheet 3 mm thickness( Chequered Plate)

Cutting, fabrication & welding of 3 mm thickness MS Chequered plate with MS angle / flat minimum 5 mm thickness and made in to required sizes/ patterns including hiring of welding machine, oxygen cylinder, Welding Gun, Cutting gun, all consumables , steel fastners including painting for fixing of Chequered plate in the existing cable trench at Electrical room, Library as per Engineer In charge instructions.