PERIODICAL SERVICES ALLIED WORKS TO ADMIN/TECH BLDGS

Amount

Material and labour for preparation of old wall surfaces and applying one coat of white wash complete all as specified and as directed. Notes for all items (i): The old surface preparation includes scrubbing down with water to remove all the dust and all forein matters/loose finishes etc and the surface shall be neat and clean the area cleaned shall be approved by the JE/AGE before application of any finishes mentioned in BOQ. Notes for all items (ii): The one coat application includes application of material with brushes left stroke and right stroke followed by up and down strokes to cover the area applied completely,similarly all other subsequent coat mentioned shall be done accordingly the unit rate quoted is deemed to be included in the quoted rate.

All as per item No. 1 described here-in-before but on ceiling surfaces.

Material and labour for preparation of old decorated external wall surfaces and applying one coat of cement based paint complete all as specified and as directed. (Height of bldg upto 15 mtrs)

Material and labour for complete removal of existing treatment from old wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade over priming coat of exterior primer all as specified and directed. (Height of bldg upto 15 mtrs)

Material and labour for complete removal of existing treatment from old wall surfaces, applying plaster of paris putty of 2 mm thickness and applying two coats of acrylic emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of old wood & wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

All as per item No. 7 described here-in-before but on steel surfaces.

Material and labour for writing letters or figures (Block Roman, Italic or Indian) not exceeding 30cm high all as specified and as directed.

Taking down cement plaster on brick or stone walls etc., including ceilings including racking out joints, hacking for key scrubbing down with water etc.,all as directed.

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair surfaces of brick work or concrete surfaces of wall , finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces, applying plaster of paris putty of 2 mm thickness and applying two coats of acrylic emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair surfaces of brick work or concrete surfaces of ceiling in repair finished even and smooth without using extra cement all as specified and as directed work in patches.

Material and labour for preparation of newly plastered surafce of ceiling applying three coats of white wash all as specified and directed.

Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed.

Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer.

Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. Make :- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd

Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etc . Note:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed.

M&L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

UNIQUE INDIA CONSTRUCTIONS (BID ID -3328550)

SEMBA ELECTRICALS (BID ID -3330597)

P JAYAPATHY & C0 (BID ID -3330842)

Rajapriyaconstruction (BID ID -3330348)

TECKXPERT ENTERPRISES (BID ID -3330025)

RISHAN INFRA ENTERPRISES (BID ID -3330024)

VIJAYA ENTERPRISES (BID ID -3330834)