REPAIRS TO JOINERY, ROOFING, FLOORING, PLASTERING, PLUMBING, SANITARY FITTING SECURITY/BOUNDARY WALL, FENCING, DRAIN, PATH AND HARD STANDING, IN TRU AREA, FIRING RANGE, AND ALL E/M INSTALLATION IN TECHNICAL AREA AT AIR FORCE STATION PATHANKOT

Amount

Demolition of brick work built in cement mortar etc., complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.50 metres wide and not exceeding. 1.50 metre in depth and getting out in any type of soil etc., complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 250m but not exceeding 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25mm thick with excavated soil complete all as specified and directed by Engr-in-Charge.

Providing cement concrete type D-1 (1:4:8) using 40 mm graded crushed stone aggregate as in foundations,filling and massconcrete including necessary form work complete all as specified and directed by Engr-in-Charge.

Brick work brick with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Brick work with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Brick work excpet brick with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 complete all as specified and directed by Engr-in-Charge..

Rendering 15mm thick in CM 1:6 on brick surface finished even and smooth without using extra cement as in drain complete all as specified and directed by Engr-in-Charge.

PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

Excavation/clearance of mud from mansoon drains not exceeding 1.50m wide not exceeding 1.50m in depth and getting out complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50m and deposited where directed by Engr-in-Charge at a level not exceeding 1.50m above starting point, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in roof, ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

75mm thick PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and directed by Engr-in-Charge.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment incl 20 mm thick sand cushioning below paver block complete all as specified and directed by Engr-in-Charge.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-35 Grade with grey cement and pigment incl 20 mm thick sand cushioning below paver block complete all as specified and directed by Engr-in-Charge.

Designer coloured, polished floor paver tiles of size 300 x 300mm x 25mm thick or equivalent size as in machine pressed set, jointed and pointed in neat cement slurry over and including screed be 20mm thick in CM 1.6 including demolition of existing surface complete all as specified and directed by Engr-in-Charge.

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

PCC 1:3:6 type C-27, thick 75mm (using 40mm graded stone aggregate) as in floor fair and even & smooth without using extra cement incl necessary form work etc complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and directed by Engr-in-Charge.

All as per item no 20 above but embedded in concrete complete all as specified and directed by Engr-in-Charge.

Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.

Cement concrete 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete all as specified and directed by Engr-in-Charge.

Dismantling mild steel work of any description and in any position complete all as specified and directed by Engr-in-Charge.

MS work conforing to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete all as specified and directed by Engr-in-Charge.

TMT Bars 10 mm dia and over cut to length, bent to shape required including cranking, bending looking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and directed by Engr-in-Charge.

Dismantling chanlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and directed by Engr-in-Charge.

Supply and fixing only Chain link fencing using 4mm dia GI wire 75x75mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-Charge.

Supplying and fixing flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and directed by Engr-in-Charge.

Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in repairs Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by make as approved by GE of UTS 145 to 150 Kg/mm2 and dia of coil when stretched 610mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge.

Restraining and resecuring of barbed wire including removal & refixing of concerntina coil wherever required in single/double security fencing/on security wall complete all as specified and directed by Engr-in-Charge.

Preparation of new steel and iron surfaces of any description over 10cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Preparation of old steel and iron surfaces area of each tile exe 0.80 Sqm but not exe 1.20 Sqm of steel and iron posts and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Preparation of old steel and iron surfaces area of each tile not exe 0.80 Sqm of steel and iron posts & applying 2 coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1sq.m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame n exc 1.50 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame n exc 1.50 sqm but n exc 4 sqm each complete all as specified and directed by Engr-in-Charge.

Refixing in same opening shutters of any description exc 1sq.m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

Factory made Steel window/ Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two open able leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015, Including taking down existing one and including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Including two coats of synthetic enamel paint complete. (h) Stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm &fixed with aluminium wire staples. (j) Glass pane 3mm thick fixed with MS pin and oil putty. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.cutting holes and good dismantled portion in PCC(1:2:4) type B1.

Pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer,including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm, and including taking down existing one complete all as specified and directed by Engr-in-charg.NOTE:- During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer,including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm and Including taking down existing onecomplete all as specified and directed by Engr-in-charg. NOTE:- During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supplying and fixing for 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified,including two coat of synthetic enamal paint over one coat of pink primer, complete all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated

Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated

Supplying and fixing for 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.20 (a) including two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube all as specified, in built fixed to wall with CSK screw 100 mm long, screw holding strength of PVC frame Shall be 200 Kgf ,fixing shall be done with anchor screw ( 150 mm x 8mm) with PVC Nylone SLEEVE fixed with screw complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by Engineer-in-Charge

Supplying and fixing Galvanised stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Preparing of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer-in-charge

Supplying and fixing 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 100mm size aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing for aluminium anodized door shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed by Engr-in-Charge.

Supplying and fixing for aluminium anodized door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed by Engr-in-Charge.

Supplying and fixing for aluminium anodized frame sliding window with double shutter, triple channel including hold fast/screw drilled, aluminium cleats, making good the disturbed area with existing finishing so as to match with under mentioned specification:- (a) Frame of window 100x45x2mm (b) Shutter top and bottom 39.40x17.76x1.5mm (c) Shutter inter lock section 38.40x17.70x1.5mm (d) Top size guide 92x31.75x1.5mm (e) Bottom guide 92x31.75x1.5mm (f) 5mm thick tinted glass with aluminium glazing clips rubber beads in area n exc 1.5 m size. (g) Stainless steel stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm. (h) Handle section 39.40x17.70x1.5mm with glazing clips, rubber beading, roller, locking plate etc. complete all as specified and directed.

Supplying and fixing for aluminium anodized partition with anchorage rod, aluminium cleats, drilling, punching, etc; and making good to the existing surfaces complete all as specified and directed with and including comprising of the following:- (a) Aluminium section of size 49.91x44.45x2mm thick. (b) 5mm thick tinted glass with aluminium glazing clips and rubber beading in area n exc 1.50 Sqm. (c) 12mm thick both side pre-laminated particle board fixed with aluminium clips and rubber beading.

Cutting holes in brick walls built in cement mortar or cement lime mortar exc one brick but not exc two bricks for inserting hold fasts/hinges and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. complete all as specified and directed by Engr-in-Charge.

Supplying and fixing framed work as in doors or gates and sign boards of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality B complete all as specified and directed. by Engr-in-Charge.

Supplying and fixing for Mild steel, plain, black sheet 1.8mm thickness in hearths; covering to door shut ters; covering to door chowkats (frames)cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel raming with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified. by Engr-in-Charge.

Supplying and fixing for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to store and rubnbish of the permises complete all as specified and directed by Engr-in-Charge.

Glazed ceramic coloured tiles, of size 450x350 mmx7mm thick,as in skirting, dado set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles including rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4)complete all as specified and directed by Engr-in-Charge.

non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 Sqm but n.exe 0.18 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles,including Screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in repairs vitreous china squatting pan 'Orissa pattern size 580x440mm white with 'P' or 'S' trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection 'P' trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified. and directed by Engr-in-Charge.

Supplying and fixing in repairs PVC valve less syphon action type low level flushing cistern 8-10 liters capacity with intel, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete and all as specified and directed by Engr-in-Charge.

Supplying and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste coupling complete and fixed in repair complete all as specified and as directed by Engr-in-Charge.

Supplying and fixing in repairs 32 mm dia of flush pipe for low level cistern as in repair complete all as specified and directed by engr-in-charge.

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as directed by engr-in-charge.

Supplying and fixing in repairs viterous China urinal, bowl type back or corner wall type of size 465x355x265 complete with waste fittings including providing and fixing complete all as specified and directed by Engr-in-Charge.

Cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as specified and directed by Engr-in-Charge

Taking up or down GI tubing 20mm bore including cleaning for refixing complete all as specified and directed by Engr-in-Charge.

Supply and fixing 15 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed by Engr-in-Charge

Refixing old steel tubing 15 mm dia and connection in new or old position complete all as specified and directed by Engr in charge.

Supply and fixing 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed by Engr-in-Charge

Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directed by Engr in charge.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 15mm dia Bib Taps, CP fancy type with crutch or butter fly handle screwed down pipe or for screwed iron pipe complete all as specified and directed by Engr-in-Charge

Supply and fixing in repairs pillar taps, 15mm bore cast copper alloy with capstern head, chromium plated screwed down high pressure with or without lettered hot or cold complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, Complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets Complete all as specified and directed by Engineer-in-Charge

Taking down carefully (copper/aluminium) point wiring for ceiling fan/light fitting in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.

Taking down carefully switch boards of any size and any description and boxes of such types on wall and refixing at same place duly modification over PVC panelling including necessary screws, washers, replacement of damage switches etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charg.

Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A Complete all as specified and directed by Engineer-in-Charge

Refixing and erection fixing old any thickness/size of rolled MS section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Complete all as specified and directed by Engineer-in-Charge

Dismantling AC corrugated or semi corrugated sheets in wall cladding Complete all as specified and directed by Engineer-in-Charge

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge

Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 Complete all as specified and directed by Engineer-in-Charge

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15mm thick in CM 1:4 on brick surface finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge

Preparing of newly plastered/concrete surfaces of walls and applying two coats of exterior emulsion paint(Asian) with one coat of coloured primer in camouflage pattern (four) or more shades Complete all as specified and directed by Engineer-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required.

Preparing of new plastered or unplastered or previously treated surfaces and applying three coat of white wash on walls including cleaning all window panes from splashes of white wash, etc complete all as specified and directed by the Engineer-in-charge

Preparing of old plastered or unplastered or previously treated surfaces and applying two coat of white wash on walls including cleaning all window panes from splashes of white wash, etc complete all as specified and directed by the Engineer-in-charge

Preparing of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-charge

Complete removal of existing treatment by wire brushing, rubbing down with water and preparing of old treated surfaces of walls and applying two coats of oil bound distemper (oil emulsion) over a coat of primer by roller brush including cleaning all window panes from splashes/droppings, etc complete all as specified and as directed by the Engineer-in-charge

Preparing of new steel surfaces of any description not exc.10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by the Engineer-in-charge

Bringing fine sand mixed with saw dust and forming embankments with approved fine sand mixed with saw dust including raising (or lowering) sand , spreading in layer 25 cm thick etc watering, compacting and finishing to required gradient/shape on traverse wall complete all as specified and directed by the Engineer-in-charge

M/S G P MARWAHA

pardeep singh marwaha

Surya & Gautam Builders

OMKAR SHARMA AND CO

Vijay Kumar Contractor and Engineers

new hi tech engineers and contractors

INDERJIT SINGH