SPL REPAIR TO BLDG NO T58 (OTM SINGLE MEN BK) AND ALLIED WKS AT 10 RSR UNDER GE (S) AKHNOOR

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, joints filled with bitumen sand mixed 50mm thick, finished even and fair without using extra cement, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

S&F non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, on vertical surface such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ncluding screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, with cement mortar beddingcomplete all as specified and directed.

S&F non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ncluding screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, with cement mortar beddingcomplete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick cement mortar 1:6 screed bed laid and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete with machine all as specified as on stair shelves etc, complete all as specified and as directed .

M&L for machine cut kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, and including rendering 10mm thick in cement mortar 1:4, complete all as specified and as directed by Engineer-In-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

M&L for rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for plain cement concrete M-5 (1:5:10), type E-2 (using 40mm graded crushed stone aggregate), as filling under (sunken slab) floors, complete all as specified and as directed.

M&L for grubbing up bushes, tree trunks portion not exc 30cm girth including cutting of trees/bushes grown in over wall and roofs digging out roofs and making good disturbed area of walls and roofs with plain cement concrete type C-1, 1:3:6 using 20mm graded crushed stone aggregates and matching to existing descriptions/ specifications, complete all as specified and as directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete 1:1.5:3 using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete. NOTE: welded mesh shall be paid separately

Providing and fixing ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers not less than 3mm nominal dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 2.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all specified and directed.

S&F in repair bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15mm bore, complete all as specified and directed.

S&F in repair wall mixer with provision of shower for mixing hot and cold water 3 in 1 fancy type brass chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore fixed, complete all as specified and directed.

S&F in repair for basin mixer for mixing hot and cold water 2 in 1 fancy type brass chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore fixed, complete all as specified and directed.

S&F in repair 15mm angular stop cock with wall flange stainless steel/brass chromium plated, screwed down high pressure with or without lathered hot and cold with long screwed shanks and fly nuts, complete all as specified and directed.

S&F in repair PVC connection 15mm bore size with PTMT nuts of length 45cm length, complete all as specified and directed.

S&F in repair PVC valveless symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets 10 ltr capacity, complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished), 20mm thick, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

S&F for fancy brass chromium plated shower rose 125mm size, fancy type, fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F as in repair ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule 20mm bore, complete all as specified and directed.

Rotational moulded polyethylene water storage tank of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, including taking down existing storage tank, complete all as specified and as directed.

S&F in repair 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle, complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed .

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. but including concrete bedding layer, complete all as specified and as directed .

S & F in repair brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket complete all as specifed and directed.

S&F in repair waste pipe for SINK/WHB/Urinal for 32/40mm dia, complete all as specified & as directed.

S&F in repair Vitreous china wash basin, of size 195x590x420mm oval shaped including waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting stand porcelain stopper a pair of CI brackets fixed, complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

M&L pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed .

M&L for plain cement concrete M-10 (1:3:6), type C-0, (using 12.50mm graded crushed stone aggregate), nominal mix, as in cills, steps; plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates and in hold fasts or filling in hollow of steel frame, including necessary form work, complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Supply and fixing of cupboard shutter 20mm thick (style) factory made pannel PVC including chowkat frame made out of M.S tubes 19 gauge for top and bottom rails M.S frame shall be covered with heated moulded plain colour PVC © channel having a PVC sheet strip of 10mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side 10mm (5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottom rail. Pannelling for plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying fixing in the frame at site as per specification and drawing, complete all as specified and directed.

Sheet glass, 3.0mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F figured glass 4.0mm thick, pin head type glazed with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engineer-In-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc, complete all as specified and directed.

S&F glazed and skelton shutters using 2nd class hard wood 35mm thick open rebated and prepare to receive glass or gauge etc edges of framing plain and chamfered or fitted cut or mitered beads for securing glass size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square, complete all as specified and as directed.

S&F in repair for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S&F for mild steel square bar framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staging for of water tanks, cooler stand and similar work conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed.

M&L for mild steel flat iron 40x6mm and struts in fencing including cutting tops to shape as directed, drilling holes, Fe 290 gde E-165 complete all as specified. .

M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cement mortar in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cement mortar width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed .

S&F aluminium anodised barrel tower bolt ISI marked of extruded section and fixed, length of bolt 150mm, complete all as specified and directed.

S&F aluminum alloy, anodized sliding door bolt ISI marked with hasp staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 250 mm long, complete all as specified and directed.

S&F extruded aluminum alloy handles 150mm ISI marked size fabricated type anodized, complete all as specified and as directed.

S&F mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F floor doors stopper of aluminium alloy body and tenque anodised ISI marked with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed.

S&F butt hinge, ISI marked, medium weight cold rolled mild steel 100mm long to PVC door etc, complete all as specified and directed.

S&F as in repair epoxy powder coated rods of mild steel 25 mm with fixing brackets, pelmet rods including pair of fancy type finnals, complete all as specified and directed.

M&L for GI wire 6mm dia including fixingwith straining bolt and nuts with hook and necessary plain cement concrete and form work for mosquito net equal to length of barrack and 4 Nos line in each barrack, complete all as specified and directed.

Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and directed.

M&L 5mm thick plastering on fair faces for concrete surfaces finished the surface even and smooth without using extra cement in cement mortar 1:3 on ceiling, complete all as specified and directed.

M&L 15mm thick plastering on fair faces of bricks or concrete surfaces finished the surface even and smooth without using extra cement in cement mortar 1:4, mixed with water proofing compound @ 3% by weight of cement, complete all as specified and directed. (Note: Cost of water proofing compound shall be included in item), complete all as specified and as directed.

M&L for preparation of new surface of wall with 3mm thick wall putty on plastered surface and applying two coat of oil emulsion white or coloured over a coat of primer of chalk whitening on walls complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over coat of primer, complete all as specified and as directed.

M&L for preparation of complete removal of existing surfaces of wall and applying two coats of cement paint, complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash over one coat of wall care putty of 3mm thick, complete all as specified and as directed.

M &L for preparation of new surfaces of walls plastered surface, priming with alkali resistant primer and applying two coats of exterior emulsion paint (Apex Ultima or equivalent), complete all as specified and as directed.

S&F Cast iron sand cast soil, waste and vent pipe, 100mm bore, in any length with or without ears, with cement joints, fixed on walls, including taking down, complete all as specified and directed.

S&F Cast iron sand cast soil, waste and vent pipe, 100mm bore, in any length with or without ears, with cement joints, in floors, including taking down, complete all as specified and directed.

S&F Cast iron sand cast soil, waste and vent pipe, 75mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, including taking down, complete all as specified and directed .

S&F Cast iron sand cast soil, waste and vent pipe, 75mm bore, in any length with or without ears, with cement joints, fixed on walls, including taking down, complete all as specified and directed.

S&F in repair 150 x 100 mm dia stoneware Gully trap setting and jointing with cement mortar 1:1, complete all as specified and directed .

Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed.

M&L for hardcore of broken stone, gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

<&ÙM&L for 75 mm thick pl

(a) One light point/fan point/ exhaust fan point/ bell point controlled by one switch.

(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board.

(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board.

(d) One light point controlled by two 2 way switches.

Please Enable Macros to View BoQ information