Construction of Boundary Wall of Dhengura Birhor Tanda Upgraded Primary School, Block- Katkamdag, District- Hazaribag

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth to a distance up to 50m. Including all lifts with levelling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design & building specification and direction of E / I .(5.1.1. BCD )

Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item) - ( 5.1.2 BCD)

Providing coarse clean sand filling in foundation trenches and plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of all materials, labour, royality, & taxes all complete as per building specification and direction of E/I (5.1.10 BCD)

Providing designation 75B one brick flat soling joints filled with local sand including the cost of watering taxes royality all complete as per building specification and direction of E/I..(5.6.3 BCD)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4(1Cement :2 coarse sand (zone-III):graded stone aggregate 20 mm nominal size). (5.3.1.2 BCD)

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. (5.2.6.BCD

Providing R.C.C. M-200 with nominal mix (1:1.5:3) in foundation with approved quality of stane chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 Excluding screeing, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. ( 5.3.9.1 BCD)

Centering and shuttering including strutting, propping etc and removal of form for Columns(5.3.17.1 BCD)

Centering and shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of caloumns etc., for mass concrete.(5.3.17.6 BCD)

Providing and laying in position specified grade of reinforced cement concrete in columns ,excluding the cost of centering ,shuttering , finishing and reinforcement -All work above plinth level up to floor five level)1:1.5:3(1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). (5.3.10 BCD)

Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l..(5.2.14 BCD )

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). ( 5.3.11 BCD)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, Beams, Plinth beams, girder, bressumers and cantilevers. (5.3.17.5 BCD)

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors Roof, landing, balcony and access platfirm..(5.3.17.3 BCD)

Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, chajjas , corbels etc, including edges). (5.3.17.19 BCD)

Supplying, fitting and fixing 20 guage G.C.I sheet gate fitted on M.S. Angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arragement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. . (5.5.29.BCD

Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 8mm (5.5.4 BCD)

Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 10mm (5.5.5 (a) BCD)

Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 8MM (5.5.5 (B)(C) BCD)

S/F/F MS grill with ms grills made of 20x6 mm ms flat or 16 mm ms square bar do-do all (5.5.12 BCD)

Providing and fixing fan hook of 16 mm dia M.S. bar 1 Meter long bent to required size and shape , placed in position and fixed in R.C.C. slab / beam at the time of casting all complete as per building specification and direction of E/I (5.5.13 BCD )

Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty :surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.(5.6.19 BCD)

Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.(5.6.20BCD)

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. (5.7.6 BCD)

Provinding 12 mm thick water proof cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. (5.7.3 BCD)

Providing two coat of oil bond distemper of approved shade and make over acoat of cement primer over new coat do - do all complete job (5.8.18 BCD)

Providing primer one coat of red lead paint painting with ready mixed paint of approved shade and make new steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.41 BCD)

Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.43 BCD )

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (5.3.8 )

Providing angle as per I.S. 226 65 x 65 x 6 / 8 / 10 mm (Gr. A) ( M-195 (b (ii)BCD))

providing and fixing concertina coil fencing with punched tape of concertina coil of 600 mm dia. Do-do- asper specfication and direction of E/I (DSR 16.53)

Drilling 6mm dia hole M.S. angle iron for fixing of staples etc. as per building specification and direction of E/I.(BCD 5.5.23)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). D.S.R. Item No. 13.46.1

Finishing walls with premium acrylic Smooth exterior paint...Applied @1.43 Ltr./ 10 Sqm over and including priming coat exterior primer applied @ 2.20 kg/10 sqm.(DSR 13.47.1)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade colour 15X15cm Tiles.(BCD 6.23.4)

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square barsfitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.(BCD 5.5.30)

providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper ,applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction E/I.(BCD 5.8.15)

Providing 125mm thick brick jali work in C.M. (1:6) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I.(BCD 5.2.26)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)(BCD 5.3.1.1)

Brick bats (including CP)(M-198)

Unskilled Labour (BCD SOR Page No-51 ,Sl.No-98)

Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long with 10 litre low level P.V.C. cistern(3.2.1 DWSD)

providing and fixing stainless steel A ISI (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40mm, including painting fitting and brackets, cutting and making the wall good whereever require 610mm x 510 mm bowl depth 200mm (DSR 17.10.2.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25mm dia(18.8.2 DSR)

32 mm dia (18.8.4 DSR)

Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350 gms.) with extra socket all complete as per specification and direction of E/l.(3.1.5.1 DWSD)

Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/l.15mm dia Brass Stop Cock(3.1.6 DWSD)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.(12.41.2 DSR)

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door-110mm(12.42.3.2 DSR)

Bent 87.5 Degree-110mm(12.42.5.2 Dwsd)

Shoe (Plain)- 110mm

Coupler-110mm dia (12.42.1.2 DSR)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(18.48 DSR)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.(1.1.1 Electrical )

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire(1.7.1 Electrical)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.(1.33)

Supplying and fixing 20 mm dia. ISI marked PVC conduit(M-471)

5/6 amps ,one way switch (1.23.1 Electrical)

121mm x 173mm x 48mm (1.22.6 Electriucity)

Supplying and fixing of 12" (300 mm) metal exahust Fan(M-755)

Supplying and fixing of holder type LED - 9/10 watt (M-855)

Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long with 12.5 lit. low level P.V.C. cistern (3.2.1 (A)DWSD)

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. (A) Elbow 20mm Dia

25mm Dia

(B) Tee Plain 20mm Dia

©Reducing Socket 20mm Dia

(D)Nipple 20mm dia

25mm dia

(E) Reducing Tee Plain 20mm dia

(F) Union Socket 20 mm dia

Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C. (1:2:4), brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direcition of E/l..(3.1.17 DWSD)

Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I. 250 mm(3.1.18 B)

CARRIAGE OF MATERIAL CEMENT

STONE CHIPS

BRICKS

Add 18% GST

Add 1% Labour Cess

Please Enable Macros to View BoQ information