Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
14 Dec 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Kumar Gaurav
Mr. Kumar Gaurav, Dy. Mgr. (C&M) Power Grid Corporation of India Ltd., Eastern Region - 1 Headquarters, Shastri Nagar, Vidyut Board Colony, Patna: 800023, Mobile: 8709680273
CONSTRUCTION OF CLOSED & SEMI ENCLOSED STORE AT 400/220/132 KV SITAMARHI SUB-STATION
ER1/NT/CIVIL/DOM/D00/22/00093
Open
Civil Works - Buildings
Works
SITAMARHI SUB-STATION
₹5,000
₹2.2 L
15 Nov 2022
15 Nov 2022
14 Dec 2022
15 Nov 2022
14 Dec 2022
15 Nov 2022
Name of the Package Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
1 Fill only Green shaded cells in Details and Schedule-I.
2 All the cells in Summary will be auto filled, therefore no cell is required to be filled in that sheet.
3 Instructions ,if any will be displayed automatically after selecting the cell.
Click here to proceed.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
Enter the following details of the bidder
Name of the bidder
Alternative E-mail
BOQ CUM COST ESTIMATE FOR CONSTRUCTION OF STORE AT SITAMARHI SUB-STATION (Civil work)
Sl. No. DSR-21 Ref. Item Description Unit Unit Rate (Rs.) Revised rate @ (100/112) due to GST Qty. Total Amount Excl. GST Unit Rate Unit Rate Qty. Total Amount Excl. GST
PART-A Construction of Store
1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.. All kind of soil cum 155.60 58617.63 150.00 56508.00 205.45 183.44 376.72 69104.58
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m. cum 112.40 31611.38 110.00 30936.40 253.95 226.74 281.24 63768.66
3 2.27 Supplying and filling in plinth with Jamuna/fine sand under floors including watering, ramming consolidating and dressing complete. cum 910.25 54933.59 850.00 51297.50 2161.20 1929.64 60.35 116453.95
4 2.28 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m: All kind of soil. sqm 1245.75 934312.50 1120.00 840000.00 28.15 25.13 750 18850.45
5 2.34 Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos emulsifiable concentrate of 20% Litre 185.95 35330.50 185.00 35150.00 200.90 179.38 190 34081.25
6 2.35.3.1 Diluting and injecting chemical emulsion (Excluding cost of chemical emulsion at site of work) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20% with 1% concentration. sqm 118.90 83510.60 240.00 168566.40 256.15 228.71 702.36 160633.49
7 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). cum 5466.30 228928.64 5200.00 217776.00 7365.15 6576.03 41.88 275404.00
8 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size). cum 4301.15 103141.58 4200.00 100716.00 6326.05 5648.26 23.98 135445.25
9 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). cum 6450.00 0.00 6450.00 0.00 9375.20 8370.71 0 0.00
10 4.2.5 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). cum 5818.00 0.00 5800.00 0.00 8843.45 7895.94 0 0.00
11 4.3.1 Centring and shuttering including strutting, propping etc and removal of formwork for: Foundations, footings, bases of columns sqm 196.45 8360.91 190.00 8086.40 307.95 274.96 42.56 11702.10
12 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). sqm 250.80 6974.75 250.00 6952.50 370.85 331.12 27.81 9208.34
13 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 132.00 3670.92 120.00 3337.20 113.85 101.65 27.81 2826.94
14 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). cum 6230.20 377550.12 6200.00 375720.00 8364.20 7468.04 60.60 452562.96
15 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). cum 7074.30 275048.78 7000.00 272160.00 10185.05 9093.79 38.88 353566.74
16 5.3 Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). cum 7074.00 980739.36 6500.00 901160.00 10719.30 9570.80 138.64 1326896.21
17 5.8 Reinforced cement concrete work in Vertical and horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level excluding cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). cum 6690.80 0.00 6500.00 0.00 9297.70 8301.52 0 0.00
18 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. sqm 196.45 13513.80 190.00 13070.10 307.95 274.96 68.79 18914.18
19 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. sqm 401.65 192318.05 380.00 181951.60 766.55 684.42 478.82 327713.81
20 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in Situ) sqm 401.65 0.00 380.00 0.00 766.55 684.42 0 0.00
21 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beam, plinth beams, girders, bressumers and cantilevers. sqm 332.15 151689.58 320.00 146140.80 608.35 543.17 456.69 248060.14
22 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts. sqm 453.35 117508.32 430.00 111456.00 804.25 718.08 259.20 186126.43
23 5.9.13 Centring and shuttering including strutting, propping etc. and removal of form for: Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards sqm 587.35 0.00 570.00 0.00 1100.40 982.50 0 0.00
24 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc including edges. sqm 492.35 7931.76 480.00 7732.80 814.95 727.63 16.11 11722.18
25 5.11.1 Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 159.05 115083.81 150.00 108535.50 319.25 285.04 723.57 206249.75
26 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: Thermo- Mechanically Treated bars. kg 68.10 2138223.55 66.00 2072287.14 89.65 80.04 31398.29 2513264.91
27 5.30 Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. metre 30.75 0.00 30.00 0.00 64.70 57.77 0 0.00
28 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 4677.25 65013.78 4600.00 63940.00 6658.25 5944.87 13.90 82633.64
29 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) cum 5426.15 401969.19 5400.00 400032.00 8288.35 7400.31 74.08 548215.15
30 6.12.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. cement mortar 1:4 (1 cement : 4 coarse sand) sqm 584.75 29763.78 580.00 29522.00 837.85 748.08 50.90 38077.29
31 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 665.80 0.00 650.00 0.00 1018.05 908.97 0 0.00
32 6.15 Extra for providing and placing in position 2 Nos. 6mm MS bars at every third course of brick masonry (with F.P.S bricks) sqm 69.50 3537.55 69.00 3512.10 86.45 77.19 50.90 3928.84
33 9.21.2 Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 1909.55 9261.32 1900.00 9215.00 1881.95 1680.31 4.85 8149.52
34 9.23 Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (overall area of door shutter to be measured) over item no. 9.20.1 sqm 365.85 0.00 350.00 0.00 401.40 358.39 0 0.00
35 9.42 Providing and fixing 18mm thick 150mm wide pelmet of flat pressed 3 layer (like Novapan, Ecoboard etc) or graded wood particle board (like Bhutan Board) medium density Grade 1, IS:3087 marked including top cover of 6mm commercial ply wood, nickel plated M.S. pipe 20mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3mm M.S. flat 10cm long and rawl plugs 50mm long (designation 10 no.) etc. all complete. metre 372.75 0.00 350.00 0.00 511.55 456.74 0 0.00
36 9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 300 x 16mm each 229.65 229.65 220.00 220.00 260.30 232.41 1 232.41
37 9.96.2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 250 x 16mm each 189.00 378.00 180.00 360.00 234.90 209.73 2 419.46
38 9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 250 x 10mm each 95.25 381.00 92.00 368.00 104.40 93.21 4 372.86
39 9.97.3 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 200 x 10mm each 79.25 158.50 77.00 154.00 90.80 81.07 2 162.14
40 9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size: 125mm each 69.80 279.20 68.00 272.00 60.05 53.62 4 214.46
41 9.100.2 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 100mm each 55.10 110.20 53.00 106.00 53.25 47.54 2 95.09
42 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper each 83.95 167.90 82.00 164.00 62.25 55.58 2 111.16
43 10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No. 2 and M.S. top cover of required thickness for rolling shutters: 80 x 1.25mm M.S. laths with 1.25mm thick top cover sqm 2142.10 25855.15 2000.00 24140.00 3008.80 2686.43 12.07 32425.19
44 10.7 Providing and fixing ball bearing for rolling shutters. each 438.95 877.90 435.00 870.00 424.20 378.75 2 757.50
45 10.14.1.1 Providing and fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B. Fixing with adjustable lugs with split end tail to each jamb. metre 377.70 6334.03 375.00 6288.75 444.50 396.88 16.77 6655.59
46 10.17 Providing and fixing MS fan clamp type I of 16mm dia MS bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete each 124.45 0.00 120.00 0.00 185.95 166.03 0 0.00
47 10.25.2 Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. kg 75.30 41027.21 90.00 49036.50 142.30 127.05 544.85 69225.14
48 11.3.1 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete: 40mm thick with 20mm nominal size stone aggregate. sqm 353.38 0.00 350.00 0.00 545.00 486.61 0 0.00
49 11.4 52mm thick cement concrete flooring with "Hardcrete" concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick Hardcrete concrete hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6mm nominal size) by volume with which Hardcrete hardening compound of Snowcem India Ltd. or equivalent is mixed @ 2 litre Hardcrete per 50kg of cement including cement slurry, but excluding the cost of nosing of steps etc. complete. sqm 535.25 213768.15 520.00 207677.60 855.90 764.20 399.38 305204.77
50 11.6.1 Cement plaster skirting (up to 30cm height) with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement: 18mm thick sqm 258.90 4401.30 360.00 6120.00 570.75 509.60 17 8663.17
51 11.8 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. sqm 273.25 0.00 32.00 0.00 69.30 61.88 0 0.00
52 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 836.65 10993.58 800.00 10512.00 1063.45 949.51 13.14 12476.55
53 11.37 Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete). sqm 785.40 2214.83 750.00 2115.00 935.60 835.36 2.82 2355.71
55 13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) sqm 172.80 95575.68 169.00 93473.90 324.30 289.55 553.10 160152.08
56 13.16 6mm cement plaster to ceiling of mix: 1:3 (1 cement: 3 find sand) sqm 181.95 108034.63 125.00 74220.00 253.05 225.94 593.76 134152.65
57 13.17 6mm cement plaster 1:3 (1 cement: 3 find sand) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of RCC slabs and beams sqm 181.95 0.00 170.00 0.00 334.20 298.39 0 0.00
58 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including priming coat with cement primer. sqm 89.70 85545.10 85.00 81062.80 162.55 145.13 953.68 138411.33
59 13.43.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer sqm 35.85 26450.49 34.00 25085.54 64.45 57.54 737.81 42457.01
60 13.44.1 Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @3.84kg/10sqm) sqm 57.85 42682.31 54.00 39841.74 97.60 87.14 737.81 64294.87
61 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 106.25 12691.56 100.00 11945.00 191.40 170.89 119.45 20413.15
62 13.76 Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of Engineer-in-Charge. metre 70.75 0.00 70.00 0.00 88.70 79.20 0 0.00
63 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. sqm 419.30 39560.96 400.00 37740.00 681.65 608.62 94.35 57422.93
64 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/ Hindware/ Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. Pan of size 580x440mm with integral type foot rests. each 3392.80 3392.80 3300.00 3300.00 5781.35 5161.92 1 5161.92
65 17.7.3 Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, Kingston/ Gem/ Techno/ Parko, 32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required: White Vitreous China: Flat back wash basin size 550x400mm with a single 15mm C.P. brass pillar tap. each 2127.90 2127.90 2100.00 2100.00 2040.85 1822.19 1 1822.19
66 17.28.1.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Semi rigid pipe: 32mm dia each 76.75 76.75 30.00 30.00 90.95 81.21 1 81.21
67 17.32.2 Providing and fixing mirror of superior quality thickness of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm each 727.90 0.00 715.00 0.00 1158.95 1034.78 0 0.00
68 18.10.2 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) exposed on wall 20mm dia. nominal bore. metre 249.30 2493.00 220.00 2200.00 373.35 333.35 10 3333.48
69 18.10.3 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) exposed on wall 25mm dia. nominal bore. metre 304.15 3649.80 300.00 3600.00 491.20 438.57 12 5262.86
70 18.11.1 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work): Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15mm dia. nominal bore. metre 215.10 1290.60 300.00 1800.00 485.20 433.21 6 2599.29
71 18.11.2 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work): Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 20mm dia. nominal bore. metre 249.30 0.00 320.00 0.00 541.10 483.13 0 0.00
72 18.12.3 Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. (external work): 25mm dia. nominal bore metre 257.30 0.00 250.00 0.00 417.95 373.17 0 0.00
73 18.13.1 Making connection of G.I. distribution branch with G.I. main of sizes by providing and fixing tee including cutting & threading the pipe etc. complete: 25 to 40mm dia. nominal bore each 367.75 367.75 350.00 350.00 757.10 675.98 1 675.98
74 18.15.1 Providing and fixing brass bib cock of approved quality: 15mm nominal bore each 260.60 521.20 250.00 500.00 303.85 271.29 2 542.59
75 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25mm nominal bore each 428.85 428.85 427.00 427.00 532.35 475.31 1 475.31
76 18.18.3 Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats: 25mm nominal bore each 449.95 0.00 447.00 0.00 399.15 356.38 0 0.00
77 18.21.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions. 45cm length. 15mm nominal bore each 74.70 74.70 68.00 68.00 85.20 76.07 1 76.07
78 18.32.1 Constructing masonry chamber 30x30x50cm inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4coarse sand) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design: With F.P.S. bricks. each 1157.75 1157.75 1150.00 1150.00 1712.15 1528.71 1 1528.71
79 18.38.2 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 20mm dia. Pipe metre 11.35 113.50 11.00 110.00 19.65 17.54 10 175.45
80 18.38.3 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 25mm dia. Pipe metre 14.95 119.60 14.00 112.00 25.60 22.86 8 182.86
81 18.41.3 Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work: 25mm dia. Pipe metre 69.05 552.40 65.00 520.00 164.10 146.52 8 1172.14
82 18.46.1 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 15mm nominal bore each 165.25 165.25 160.00 160.00 262.30 234.20 1 234.20
83 18.46.2 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 20mm nominal bore each 200.10 200.10 180.00 180.00 289.05 258.08 1 258.08
84 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 25mm nominal bore each 188.10 188.10 200.00 200.00 369.35 329.78 1 329.78
85 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank (circular) ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license).. per lt.cap. 7.25 3625.00 7.00 3500.00 9.70 8.66 500 4330.36
86 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approve make conforming to IS:8931: 15mm nominal bore each 619.75 619.75 618.00 618.00 594.75 531.03 1 531.03
87 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slabs with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement as per standard design: Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 8507.00 8507.00 8200.00 8200.00 11687.10 10434.91 1 10434.91
88 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of operations as per DSR With average thickness of 120 mm and minimum thickness at khurra as 65 mm sqm 1522.95 1359.78 534.82 727235.82
Total Civil work amount 9199758.35
BOQ CUM COST ESTIMATE FOR CONSTRUCTION OF STORE AT SITAMARHI SUB-STATION(Electrical work)
PART[B]: Electrical 0.00
DSR 18 Electrical PVC CONDUIT: Unit #VALUE! Unit Rate Qty. Total Amount Excl. GST
88 1.21 Supply and fixing of following sizes of PVC conduit alongwith the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required: 20 mm 0.00 0.00 0.00
89 10.17 Civil Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. Each 200.00 2000.00 850.00 8500.00 185.95 166.03 10 1660.27
POINT WIRING: 0.00 0.00 0.00
90 1.1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sq.mm FR PVC insulated copper conductor cable single core cable in surface/ recessed PVC conduit with modular plate, suitable GI box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required: Group A (for stair case and incharge room as indicated in drawing) Point 200.00 10600.00 950.00 50350.00 821.00 733.04 53 38850.89
91 1.5 Wiring for light/ power plug wiring with 2x4 sq.mm. PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit alongwith 1 number 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing as required. Metre 150.00 16140.00 1400.00 150640.00 265.00 236.61 107.6 25458.93
CIRCUIT/SUB MAIN WIRING 0.00 0.00
92 1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/recessed PVC conduit etc as required. 0.00 0.00
SWITCHES AND ACCESSORIES 0.00 0.00
93 1.24 Supplying and fixing of following modular switch/socket on the existing modular plate and switch box inclduing connections but excluding modular plare etc as required. (for incharge room) 0.00 0.00
94 1.31 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required (for main store and incharge room) Each 250.00 2000.00 650.00 5200.00 401.00 358.04 8 2864.29
95 1.41 ITC FLUORESCENT FITTING DIRECTLY ON SURFACE WITH COPPER WIRING: Installation, testing and commissioning of pre-wired, fluorescent fittings, of all types complete with all accessories and tubes etc. directly on ceiling/wall, including connections with 1.5 sq.mm PVC insulated copper conductor, single core cable and earthing etc. as required. Each 100.00 0.00 3400.00 0.00 168.00 150.00 0 0.00
96 1.42 ITC FLUORESCENT FITTINGS WITH DOWN RODS AND COPPER WIRING: Installation, testing and commissioning of pre-wired, fluorescent fittings, of all types complete with all accessories and tubes etc. including supplying and fixing ball and socket arrangement, 2 nos. down-rods of 20 mm dia. x 1.6mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq.mm FR PVC insulated copper conductor, single core cable and earthing etc as required. Each 100.00 0.00 1200.00 0.00 358.00 319.64 0 0.00
97 1.43 Supplying and fixing extra down rod of 100 cm length, GI pipe, 20mm dia. heavy guage including painting etc as required. (Note: more tham 5 cm. Length shall be rounded off to the nearest 10 cm., and 5 cm. Or less shall be ignored.) Each 100.00 0.00 450.00 0.00 40.00 35.71 0 0.00
98 1.44 Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30 cm) with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc. as required. Each 100.00 0.00 1500.00 0.00 171.00 152.68 0 0.00
99 1.50.1 Installation of exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage . Conenction , testing and comissioning etc as required. each 100.00 0.00 1800.00 0.00 363.00 324.11 0 0.00
DISTRIBUTION PANELS / BOARDS : 0.00 0.00
100 2.3 Supply and fixing of following way, single pole and neutral, prewired, sheet steel, MCB distribution board, 240 V, on surface or recess, complete with loose wire box, terminal blocks, duly prewired with suitable size Fr PVC insulated copper conductor upto terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, inteconnections, phosphatized and powder painted including earthing etc as required (but without MCB/RCCB/isolator). 0.00 0.00
101 2.1 Supplying and Fixing 5 amps to 32 amps rating, 240 V, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required. 0.00 0.00
1 STD steel glazed window…. sqm 2481.00 2481.00 41.49 102936.69
Total Electrcal work Amount 256964.62
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
Schedule-I of Price Bid
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
Sl. No. Description Amount (Ex. GST)
1 Part-A Construction of Store 9,199,758.35
2 Part-B Electrical work of store 256,964.62
Gross Total Amount Excluding GST Charge : (SL. NO. 1-8)= 9,456,722.97
TOTAL AMOUNT excl. taxes 9,456,722.97
Above and below (in %): To be quoted by bidder
Quoted Price 9,456,722.97
GST (in percentage )@ on Quoted Price 0.00
Total amount including taxes 9,456,722.97
Note: If any part of price which required to be filled by bidder kept blank, the bid price shall be considered as inclusive and evaluation shall be done accordingly
Date Printed name 0
Place Designation 0
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated Total Estimated Cost as indicated in the "Bill of Quantity(BOQ) & Prices" covering entire scope of works enclosed herewith as Schedule-I.
I Total for Installation/Services as per Schedule-I 9,456,723
II Total GST on services/Installation as per Schedule-I 0.00
III Toal BID Price including all taxes 9456722.97
Date 0 Printed Name 0
Place 0 Designation 0
RFX. No. 5002002440 NIT-419 Bid Form 2nd Envelope
BID FORM (Second Envelope)
Bid Proposal Ref. No.
Contract Services
Power Grid Corporation of India Ltd.,
Eastern Region Transmission System-I
Vidyut Board Colony Shastri Nagar
Name of Contract : Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station
Dear Ladies and/or Gentlemen,
Schedule-I Service/Installation charges
2.4 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 We confirm that we shall also get registered with the concerned Goods and Service Tax Authorities, in all the states where the project is located.
4.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : 00-Jan-00 Printed Name : 0
Place : 0 Designation : 0
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Name of Package : Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Package No : NIT-419
Specification No. : ER1/NT/CIVIL/DOM/D00/22/00093
Contract Period 11.50 Months
: Attachments : General guidelines for filling up the Attachments : CT Analyser -NIT-419 :
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Specification No.: ER1/NT/CIVIL/DOM/D00/22/00093
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(QR), 4, 5, 6, 7, 9, 10, 11, 12, 13,14, 15, 16, 17 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. This attachment is not included here.
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
ER1/NT/CIVIL/DOM/D00/22/00093 Individual Firm 1
Licensee of a Manufacturer 2
Enter following details of the bidder Representative of a Manufacturer
Specify type of Bidder [Select from drop down menu] #REF!
Name of Lead Partner
Address of Registered Office …….. …… ………. ……….
Name of Other Partner …….. …… ………. ……….
Printed Name …….. …… ………. ………. 01/Dec/25
Designation …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-3(JV) NIT-419 #REF! NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials #REF!
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
Name(s) and Addresse(s) of other partner(s)
Name : #REF! #REF!
Address : #REF! #REF!
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.
Date : Printed Name : …….. …… ………. ………. 0
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-3(QR) NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Qualifying Requirement Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
For our Qualifying Requirements Data, please refer Schedule-QR of this volume.
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-4 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.
Date : Printed Name : …….. …… ………. ……….
country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-4(A) NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
S.No. For Equipment Item Description Unit Quantity
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-4(B) NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-5 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-5 NIT-419
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-6 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-6 NIT-419
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-7 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Details of Alternative Bid)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
No Alternative Bid
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-8 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Manufacturer's Authorization Form)
Contracts and Materials
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name
…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440 including the above plant & equipment or other goods produced by us. 0
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.
We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).
For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440 including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.
In the capacity of
Date : Printed Name : …….. …… ………. ……….
Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.
2 Above undertaking shall be registered or notarized so as to be legally enforceable.
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-9 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Work Completion Schedule)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440 for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Period in months from the effective date of Contract
1 Submission of drawings for Approval
2 Production of samples for type testing
3 Completion of type tests
4 Commencement of Commercial Production
5 Offer of material for pre-despatch testing and inspection
6 Commencement of shipment
1 Completion of shipment (Receipt at final destination Site)
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-10 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Guarantee Declaration)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-11 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-11 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name of Other Partner To:
Contracts and Materials
Name : …….. …… ………. ………. Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-12 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Price Adjustment Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440 The necessary documentary evidence are enclosed :
Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **
1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI
High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE
High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =
High Grade Electrolytic Zinc , co-efficient c =
3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Note: * Indicate the publisher of the index.
** Indicate the date of indices for which the values are being furnished.
^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-13 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-14 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Bidders are required to submit 02 copy of Integrity Pact as per format enclosed at vol-I
Date : Printed Name : …….. …… ………. ……….
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact (if required)is attached in Vol-I of Bid Documents.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (n).
Specification No. : ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-15 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Information for E-payment, PF details and declaration for Micro/Small and Medium Enterprise)
Bidder's Name and Address (Sole Bidder [Individual Firm]): To:
Contracts and Materials
Name: 0 Power Grid Corporation of India Ltd.,
Address: …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidyut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We are furishing the following details of Statutory Registration Numbers and details of Bank for electronic payment
1 Name of the Supplier/ Contractor in whose favour payment is to be made
2 Address with PIN Code and State
Registered Office:
Correspondence Address:
3 Status- Company/others [Declaration of Micro/ Small/Medium Enterprtise ]
4 Permanent Account [PAN] No.
5 Goods & Services Tax [GST] No.
6 PF Registration No. Of the Company
7 PF Regional Office covered (with Address)
8 Name of Contact Person
9 Telephone No(s)
10 Bank Details for Electronic Payment
Name ofthe Bank:
Address of the Branch:
Type of Account: Savings/Current
11 9 digit MICR code printed at bottom in middle, next to cheque no.
12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that thepayment onaccount of this Contract, in the event of Award, be made in the above account maintained in theabove mentioned Bank.
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-16 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
(Additional Information)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : ……………………………… Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the (Lead Partner) :
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Description of the plant for carrying out the work
Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity
Commencement Completion
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Attachment-17 NIT-419
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Date : Printed Name : …….. …… ………. ……….
Specification No. :ER1/NT/CIVIL/DOM/D00/22/00093 Bid Form 1st Envelope NIT-419 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contracts and Materials 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
Eastern Region Transmission System-I 11 eleven 11 th 11 November
Vidut Board Colony, 12 twelve 12 th 12 December
Shastri Nagar Patna 800023 13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th
(b) Attachment 2(NIT-419) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st
(c) Attachment 3(NIT-419) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th
#REF! Applicable 23 th
#REF! Not Applicable 24 th
(d) Attachment 4(NIT-419) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th
(e) Attachment 5(NIT-419) : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 6(NIT-419) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(g) Attachment 7(NIT-419) : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th
(h) Attachment 8(NIT-419) : Manufacturer’s Authorisation Forms. 29 th
(i) Attachment 9(NIT-419) : Work Completion Schedule. 30 th
(j) Attachment 10(NIT-419): Guarantee Declaration. 31 st
(k) Attachment 11(NIT-419): Information regarding ex-employees of Purchaser in our firm.
(l) Attachment 12(NIT-419): Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.[NOT APPLICABLE]
(m) Attachment 13(NIT-419): Declaration regarding Social Accountability.
(n) Attachment 14(NIT-419): Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]
(o) Attachment 15(NIT-419): Information for E-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.
(p) Attachment 16(NIT-419): Additional Information.
(q) Attachment 17(NIT-419): Declaration.
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Goods, in and outside of India.
4.1 100% of applicable Taxes and Duties, which are payable by the Purchaser under the Contract, shall be reimbursed by the Purchaser after despatch of goods on production of satisfactory documentary evidence by the Supplier in accordance with the provisions of the Bidding Documents.
4.3 We also understand that, in case of award on us, you shall reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply. Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.
4.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.
5.0 Construction of the Contract
5.1 We declare that we have studied clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
[a] Bid document Fee Clause 3.0 of SCC.
[b] Bid Security/ Bid Guarantee Clause No 13.0, ITB, Section -II, and cl. 4.0 of SCC, Section-IV, Volume-I.
[c] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause 12.0, SCC
[d] Contract Performance Guarantee/Performance Security Clause No.14, Section GCC, Vol.-I, Conditions of Contract & Clause 13.0 of SCC, Section-IV, Vol-I.
[e] Liquidated Damages Clause No 11.0 of SCC, Volume-I
[f] Price & Price Basis Clause No 11.0 of ITB,
[g] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 9.0 of SCC, Volume- I
[h] Work schedule Clause No. 10.0 of SCC, Volume -I
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:
Name and address of agent Amount and Currency Purpose of Commission or gratuity
(If none, state “none”)
13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : Printed Name : …….. …… ………. ……….
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (NIT-419) : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
ElectronicForms™
View - Template of ElectronicForm™
To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen
Template of ElectronicForm™
Relevant Bid-Part Techical
ElectronicForm™ Template ID 7PG-2010-FT000010
Template Reference TECHNO-COMMERICIAL (First Envelope)
Template Description Tower Package NIT-419 Specification No. : ER1/NT/CIVIL/DOM/D00/22/00093
Construction of Closed & Semi enclosed Store at 400/220/132 kV Sitamarhi Sub-station . RFx No -5002002440
Bidders's Name #REF!
Section-2 (Outline of Requirements)
* 1 Integrity Pact Details
Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes
* 2 BID SECURITY DETAILS
2 (a) Submitted Yes
* 2 (b) Bid Security No.
* 2 (c) Issued by (Name of Bank)
* 2 (d) Bid Security Amount 0 0.00
* 2 (e) Valid upto
* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)
1 (b) Designation …….. …… ………. ……….
2. AUTHORIZED SIGNATORY (Other Partner of JV)
(If Bidder is JV)
2 (a) Name #REF!
2 (b) Designation #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_Schedule.xlsx
xlsx • 0.10 MB
Attachment-26 Declaration regarding events encountered pursuant to ITB Clause 2-1.docx
docx • 0.03 MB
Attachment-27.doc
doc • 0.04 MB
First Envelope and Bid Forms.xlsx
xlsx • 0.76 MB
Standard Field Quality Plan Civil Works for Site Packages Revision 04 (1).pdf
pdf • 2.22 MB
Store plan drawing.pdf
pdf • 0.25 MB
Store plan elevation.pdf
pdf • 0.13 MB
Store section drawing.pdf
pdf • 0.29 MB
TS FOR CIVIL WORK.pdf
pdf • 2.00 MB
01 Invitation for Bids (IFB)-Section-I.doc
doc • 0.16 MB
02 Sec-II ITB SSTE S&I R4-DCB-SRM-signed.pdf
pdf • 0.46 MB
03 Section - III BDS.doc
doc • 0.13 MB
03A Annexure A (BDS) QR.doc
doc • 0.05 MB
03D ANNEX-C (BDS) Sample E-stamp paper.pdf
pdf • 0.08 MB
03E ANNEX-E(BDS)-Undertaking for Authenticity.DOC
doc • 0.05 MB
04 Conditions of Contract Civil Works.pdf
pdf • 0.39 MB
04A GCC Civil Amendments I - X.pdf
pdf • 3.64 MB
05 SCC-Section-V.docx
docx • 0.07 MB
Saftey Pact Latest.doc
doc • 0.06 MB
~$ SCC-Section-V.docx
docx • 0.00 MB
Integrity Pact.pdf
pdf • 0.51 MB
Sample Stamp Paper for Integrity Pact.pdf
pdf • 0.28 MB
Thumbs.db
db • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .