REPAIR/MAINT TO DOOR/WINDOWS, CUPBOARD/KITCHEN CABINET WORK, JOINERY/GLAZING WORK, FLOORING AND CEMENT WORKS, STEEL WORK, PLASTERING WORK, ROOF SHEETS ETC IN AATS OF AGE B/R-I UNDER GE EAST AGRA

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.

M&L for taking down wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting necessary repair and re-fixing in same opening with same hardware etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for steel gates etc complete all as specified and directed.

S&F for Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed.

S&F for 1.60mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete all as specified and directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed.

S & F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Mild steel butt hinge medium weight cold rolled of size 100 mm long and fixed with screw/ welding complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding on steel frame complete all as specified and directed.

M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded sectioncomplete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing position complete all as specified and directed.

S&F powder coated anodized aluminium door & frame for door, windows and ventilator with one or more rebates incl joining cleat for fixing etc of weighing 0.55 kg/m complete all as specified and directed.

S&F of power coated any colour anodised aluminium door shutter, aluminium section weighting 0.55 kg/m incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters,side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F in repair Double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed.

S&F in repair mortice lock brass of size 100mm and of 4 levers complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

All as per ser Item No 28.00 above but exceeding 0.5 Sqm in each pane.

Description all as per item No 28.00 here-in-before but 5.00 mm thick figured glass pin head type complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair of mild steel 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.

S&F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay etc dovetailed or welded, size and thickness of members confirming to IS 1038 complete all as specified and directed.

S&F for 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F in repair Door closer( Dia cast body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic/Granite (floor,dado) including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including 20 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material & labour glazed ceramic coloured tiles of size 450x300x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement screed bed of CM (1:4) complete all as specified and directed.

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Taking down of plaster from wall/ ceiling and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces complete all as specified and directed.

Material & labour for preparation of new surfaces of wall and applying two coats of oil bound distemper over and including one coat of 3mm thick wall care putty to match the existing as required, complete all as specified & directed.

S&F inrepairs Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws.Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

Supply & fixing inrepair 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed.

S & F inrepair Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm complete all as specified and directed.

S&F inrepairs Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified and directed.

S&F in repairs mild steel PVC coated metalic fancy type of approved finish curtain rod incl brackets and fancy type knobs, rings etc complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and knobs including fixing arrangement with drilling holes in walls, etc complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board,shelves,etc.wooden area should drill by 6 mm bit,Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit,gap between two holes is 45 cm to 60 cm.filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces.The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm complete all as specified and directed. The ATT chemical should contains. (i) Byfinthrin 20 % EC(Smell Chemical) (ii)CHLORPYRIPHOS 20 % EC (Smell Chemical) (iii) Imidacloprid 30.5 % SC (Odor less Chemical) The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years.

M&L for door seal with stainless steel strip complete all as specified and directed.

Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from MoD land etc complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in in roof top surface without using extra cement similar work complete all as specified and directed.

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

M&L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment APP modified polymeric water proofing membrane of weight not less than 3 kg/sqm with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (e)Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) .

M&L for preparation of new surface of roof incl cleaning the surface by using pressure hose and applying high performance polyurethane liquid membrane roof coating applied cold in two coats @ 1.5 kg/sqm/ 2 coats spray/ brush applied with an elongation of 300 percent to 700 percent and tensile strength of not less than 3 N/ sqmm as per ASTM D 412 and ASTM D2370 crack bridging ability of 3.5mm as per ASTM C 1305 and hardness of not less than 60 as per ASTM D 2240. The item includes epoxy primer applied @ 0.15kg/sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete all as specified and directed. Make: M/s Asian paint ltd/ Sika India ltd/ Fosroc chemicals/ STP limited / IWL india limited/ Berger Paints India Ltd or any other firm on approved list of manufacturer of HQ E-in-C's Br. Note : (a) The work shall be carried out by the authorized applicator of manufacturer by using modern techniques. THe contractor shall also furnish warranty of quality , finish work and effectiveness of water proofing treatment under this item for a period of not less than 7 years from the date of completion along with manufacturer warrenty of material for the same period. (b) From the taking down, preparation of the surface, Engr-in-Charge shall approve each and every stage before applying finishing coat.

Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or screws J-type or cranked hook complete all as specified and directed.

S&F of 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc.with grade of zinc coating 275. complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wooden wall panelling incl. frame and make good the surface etc complete all as specified and directed.

S&F solid PVC Wall Lining for wall panelling consisting of 5 mm thick wood grain printed colour PVC sheet inclusive fixing with all accessories at site as per specifications and drawing complete all as specified and directed.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling including fixing to wall to make PVC frame complete all as specified and directed.

Supply and spraying multi insect, anti-termite borer insect repellent into cupboards, shelves, kitchen cabinet drawers, doors, windows etc complete all as specified and directed by engineer-in-charge. Note : (i) All the spray will be carried out as per manufacturer instruction & presence of Engineer-in-charge. (ii) All the qty shall be deposited in custody of Engineer-in-charge and issued as per requirement.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F of Anodised aluminium snap grid frame work for false ceiling all as specified and directed

S&F of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F of Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

S&F in repairs 3mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors with grey pigment cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed.

MNR ASSOCIATES (BID ID -3379151)

3Krishna Enterprises (BID ID -3379262)

rohan traders (BID ID -3380663)

Abhi Construction (BID ID -3380158)

Mahendra Enterprises (BID ID -3377943)

JWALA ELECTRIC CONTRACTORS (BID ID -3378207)

M/s SCHOLASTIC ENTERPRISES (BID ID -3378225)