Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC 97 ABROL NAGAR PATHANKOT 145001 PB | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Award of contract | |
| 2 | L2₹8.0 L+₹94,081 (13.3%)Rejected-AOC | L2 | Rejected-AOC Other than lowest | |
| 3 | L3₹9.2 L+₹2.2 L (30.9%)Rejected-AOC | L3 | Rejected-AOC Other than lowest |
Tender Value
₹7.3 L
EMD Value
₹14,800
Closing Date
28 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Dharamshala
AGE(I) Dharamshala PIN-176216
ADDN/ALTN TO BLDG NO P-219 IN BHARATPUR LINE AT MIL STN DHARAMSHALA
2023_MES_633148_2
AGE(I)/DSL-56/2023-24
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Dharamshala
As per NIT
7 documents required · 7 mandatory
₹500
AGE(I) Dharamshala
₹14,800
Yes
30 Mar 2024
7 Feb 2024
1 Mar 2024
7 Feb 2024
28 Feb 2024
14 Feb 2024
Amount
Taking down chowkhats or frames exc 1.50 sqm but not exc 4 Sqm with shutters (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.
Demolition of stones or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc, complete all as specified and directed by Engr-in-Charge.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.
S&F for three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm (using two track for glazed window shutter and one track for wire gauged) , the section shutter size 37.0x 18.0x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings, complete all as specified and directed by Engr-in-Charge.
M&L for Chequered cement concrete tiles with grey cement and not pigment ,20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick cement concrete 1:2:4 Type B0 as in floor finished even and rough to receive further floor finishes, complete all as specified and directed by Engr-in-Charge.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade ST.-24, complete all as specified and directed by Engr-in-Charge.
S&F for framed brackes of angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. not exc 10 kg each brackets conforming to FE-410-W, complete all as specified and directed by Engr-in-Charge.
Pre pantined galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface, complete all as specified and directed by Engr-in-Charge.
Preparation of old plastered surface of wall and applying two coat of OBD, complete all as specified and directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each not exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/dense soil, complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
TMT bar 10mm dia and over, cutt length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.
Ditto as Srl Item No 15, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed by Engr-in-Charge.
M&L for walling of random rubble stone masonry brought upto course well bonded bedded and solidly hearted built in CM 1:4 but except stone, complete all as specified and directed by Engr-in-Charge.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter, complete all as specified and directed by Engr-in-Charge.
RCC (Design Mix) M-25 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in fioors, roof, landings, deck slabs and in shelves, complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
M&L for rendering or plastering work 15 mm thick in CM 1:3 in fascia/edges/ceiling of Chajjas and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed by Engr-in-Charge.
M&L for two coats of Cement Base Paint on new finished surface of Walls including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.
M&L for point wiring (in repair) with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet covered with 3 mm thick plastic laminated sheet ( Make Hylum) concealed in wall or on surface as per site requIrement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch, complete all as specified and directed by the Engineer-in-Charge.
All as per item No 23 above, but for one 3 pin socket outlet 5 Amp on independent board, complete all as specified and directed by the Engineer-in-Charge.
All as per serial item No 23 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.
M&L for socket outlet 2 in 1, 3 pin, 5A flush type, complete all as specified and directed by Engr-in-Charge.
M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified and directed by Engr-in-Charge.
M&L for Switch piano flush type single pole one way 15 Amp, complete all as specified and directed by Engr-in-Charge.
M&L for Switch piano flush button 5 Amps, complete all as specified and directed by Engr-in-Charge.
M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engr-in-Charge.
S&F in replacement of existing unsrviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 08 way (Double door) with 200 amp 240 Volts rated bus bar, complete all as specified and directed by Engr-in-Charge. Note: i) Connections of MCB's shall be done with appropriate size of brass/Copper thimble. ii) The disturbed surface shall be match with existing surface.
S&F for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 AMP, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engr-in-Charge.
S&F for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engr-in-Charge.
S&F for LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engr-in-Charge.
S&F for LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge.
S&F in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP65/66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed by Engr-in-Charge.
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion, complete all as specified and directed by Engr-in-Charge.
S&F for metalic exhaust fans 300 mm sweep on wall with fixing metalic louvers (Iron shutter) in outer side of wall with suitable size anchor bolt. Making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost with specially designed metal blade and making connection of exhaust fan to ceiling rose by copper flexible wire, complete all as specified and directed by the Engr-in-charge.
S&F for electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete all as specified and directed by Engr-in-Charge with all accessories such as safety valve, NRV, connection piece etc.thermostate,
S&F for 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apartincluding4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed by Engr-in-Charge.
M/S JATINDERA ENTERPRISES
VIJAY KUMAR LAKHNI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .