REP MAINT CLEANING OF DRAINS ROOF TERRACES CHAJJAS TOP REMOVAL OF VEGETATION GROWTH CULVERTS AND CONNECTED REPAIR WORK AND REPAI MAINT OF INTERNAL WIRING INCLUDING SUB MAIN WIRING SPN TPN DBs BUILDING SECURITY LIGHTS OTM ACCN BAIRAGARH BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down carefully existing point wiring (any type viz. aluminum or copper) with wooden batten/surface PVC conduit (with its fittings)/PVC casing-capping or any other type for light, fan, power point (including switch, socket, ceiling rose, etc.) and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete all as specified and directed.

M&L for concealed point wiring for one light/fan point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC Casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. complete all as specified and directed. Note :(i) Wiring to be done as per approved colour code in IE rule. (ii) Rate includes chase cutting for concealed wiring.

All as per item No. 2.00 here-in-before but for one light point controlled by two 2 way switches, with FRLS cables of 1.5 sqmm complete all as specified and directed.

All as per BOQ item No. 2.00 above, but one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No. 2.00 above, but 3 pin 5 Amps switch socket combination on independent board with other switches complete all as specified and directed.

All as per BOQ item No. 2.00 above, but for bell buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

All as per item No. 2.00 here-in-before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per item No. 2.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for Geyser and AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

M&L for Point wiring with PVC insulated unsheathed electric cable 1100 volts grade, single core,FRLS cable having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area, ISI marked, drawn in existing concealed conduit with 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor FRLS cable, ISI marked as continuous earth conductor connected to earth dolly by providing suitable lugs including new laminated hylum sheet cover of min 3.0 mm thick , ISI marked of Make" Hylem" of suitable sizes to be fixed/ mounting on existing MS/ GI sunkun boxes for mounting of fittings like switches, sockets, fan regulators etc fixed with galvanised screw and cup washer complete all as specified and directed for the following:- Note : Wiring to be done as per approved colour code in IE rule.

One light point controlled by one switches complete all as specified and directed.

One bell point controlled by one bell push complete all as specified and directed.

One light point controlled by two 2 way switch complete all as specified and directed.

One 5 Amps socket outlet point controlled by one switch on independent board with other switches complete all as specified and directed.

One 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No. 5.00 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per item 5.00 herein before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for Geyser and AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLS cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, ISI marked including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed FRLS copper wire, ISI marked of green colour for continous earth, including sunken box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coated of aluminium paint on internal surface and two coat of anti corrosive paint over external surface, including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed for the following:- Note : Wiring to be done as per arroved colour code.

One light point controlled by one switches complete all as specified and directed.

One bell point controlled by one bell push complete all as specified and directed.

One light point controlled by two 2 way switch complete all as specified and directed.

One 5 Amps socket outlet point controlled by one switch on independent board with other switches complete all as specified and directed.

One 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per item 8.00 herein before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per item 8.00 herein before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for Geyser and AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, complete all as specified and directed.

S&F Polycarbonate switch piano, flush button, single pole, two way, 5 Amp, 240 volts ISI marked, complete all as specified and directed.

Supply and fixing, Polycarbonate ceiling rose, surface type, 3 terminal, 240 , ISI marked, complete all as specified and directed.

Supply and fixing Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type complete all as specified and directed.

S&F Polycarbonate switch socket combo outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed .

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, complete all as specified and directed.

S&F Polycarbonate socket piano flush button single pole one way 15 Amp 240 volt ISI marked, complete all as specified and directed.

S&F, stepped type electronic fan regulator, Delux model, 100 watt, 240V, flush type complete all as specified and directed.

Supply and fixing lamp holder, PVC/Poly carbonate type with back plate suitable for batten fittings including 9 watt LED lamp, and all cnnected accessories complete all as specified and directed.

S&F, Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S & Fix Bell push, flush type, SP, 5 amp, 240V complete all as specified and directed.

Taking down unserviceable sub main wiring including service connections, of any size and any description including conduit pipe complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into and including rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 25mm external diameter and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into and including rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 25mm external diameter and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 10 sqmm nominal cross section area and drawing into and including rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 25mm external diameter and PVC insulated stranded copper conductor of 10 sqmm nominal cross section area as earth wire complete all as specified and directed. (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 10.0 sqmm cable, one run of 10.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 4.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by EIC. Make of Cable : V-MARC/ Plaza/ Havells/ Polycab as approved by GE

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 6.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by EIC. Make of Cable : V-MARC/ Plaza/ Havells/ Polycab as approved by GE

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 10.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by EIC. Make of Cable : V-MARC/ Plaza/ Havells/ Polycab as approved by GE

Taking down old unserviceable MCB DB of any size and capacity including wooden boards complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, TPN 415 Volts 200 amps rated busbar 4 way Double door factory made Conf to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel , neutral link and 200 amp , 440 volt rated bus bar suitable for mounting 63/100 Amp Mccb.DB shall be semi glossy finished with epoxy polyster based powder paint sprayed (RAL 9003) and baked at high temperature with anti rust conditoning protection against corrosive atmosphere . IP 43 protection class . DB shall also be provided with lable marking indicating the incoming and outgoing circuit .complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, VTPN 415 Volts 200 amps rated busbar 4 way Double door ( Vertical DB with MCB as incomer) factory made Conf to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel , neutral link and 200 amp , 440 volt rated bus bar suitable for mounting 63/100 Amp MCCB as incomer .DB shall be semi glossy finished with epoxy polyster based powder paint sprayed (RAL 9003) and baked at high temperature with anti rust conditoning protection against corrosive atmosphere .DB shall also be provided with lable marking indicating the incoming and outgoing circuit IP 43 protection class complete all as specified and directed.

S&F MCCB TPN 100 Amps, 10 KA breaking capacity, including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F MCCB TPN 63 Amps, 10 KA breaking capacity, including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 10 KA, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 10 KA, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 16 KA, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated without busbar 16 KA, 2 way Single door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F MCB SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F MCB TPN 40 to 63 Amps, 10 KA breaking capacity, including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F single pole and neutral enclosure with two pin and earth, plug and socket, suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed.

S&F LED tube light box type Highly durable surface mounted LED batten constructed of fire retardant engineering grade extruded plastic and decorative end caps. 22/25 Watt (reterofit type, T8 pattern, single side connection) 240 V, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, approx length 4 feet to be fixed in existing or new batten including taking down of existing tube light fitting complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

S&F GI tubing light grade 40 mm dia with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including necessary nut,bolt and washer or for protection of GI wire, etc including taking down old rusted pipe complete all as specified and directed.

S&F GI tubing light grade 50 mm dia with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including necessary nut,bolt and washer or for protection of GI wire, etc including taking down old rusted pipe complete all as specified and directed.

S&F GI tubing light grade 15 mm dia with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including necessary nut,bolt and washer or for protection of GI wire, etc including taking down old rusted pipe complete all as specified and directed.

Supply and fixing earth continuity conductor or main earthing lead of 4 mm GI wire laid in pipe/ fixed to wall on batton or recess or chases or buried in ground or drawn in conduit / pipe or any other indicated situation for loop earthing etc including jointing by using suitable size lugs, GI nuts, bolts and washer complete and all as specified and directed.

S&F in replacement bulk head luminare weather proof, including one No. LED lamp 9W and connecting with copper flexible three core 23/0.0076 and all necessary fittings complete and all as specified and directed. Make: Bajaj/ Philips/Wipro/Crompton/Havells.

S&F in replacement surface mounted economical LED panel light 2 ftx2ft, 36/40 watt with high quality diffuser for uniform light, CRCA housing, Separate replaceable electronic driver, suitable for recess and surface, CRCA panel 36/40ECW including LED lamp, nut, wire all connected accessories complete all as specified and directed.

S&F in replacement surface mounted economical LED panel light 1 ftx1ft, 18/20 watt with high quality diffuser for uniform light, CRCA housing, Separate replaceable electronic driver, suitable for recess and surface, CRCA panel 18/20ECW including LED lamp, nut, wire all connected accessories complete all as specified and directed.

M&L for cutting PCC/floor/road for taking out/ laying of cable, GI earth wire etc in protection pipe and making good, including material as per existing after laying of pipe for cable protection, GI wire etc, size of trench not more than 0.30 x 0.30 m complete all as specified and directed.

Taking down existing u/s fitting any type any size and S&F LED 9/10 Watt mirror tube light fitting intergated type, approx 2 feet ,240 v, PF > 0.90, colour Temp 6500 K, suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.

S&F in replacement Garden light, including LED lamp 9 Watt, 220 volt, 50 Hz, Approx height 2 ft , including mounting arrangemet, clamp, PCC in pit of suitable size complete all as specified and directed.

Supply, laying, fixing or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated multi stranded alunimium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 10 Sqmm x 2 core nominal cross section in service connections inculding taking down old cable complete all as specified and directed.

Taking down u/s service cable any type any size and Supply, laying, fixing or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated multi stranded alunimium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 16 Sqmm x 4 core nominal cross section in service connections complete all as specified and directed.

Taking down u/s service cable any type any size and Supply, laying, fixing or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated multi stranded alunimium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 25 Sqmm x 4 core nominal cross section in service connections complete all as specified and directed.

Excavating in trenches, nott exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

Taking down old building security light and S& F building secutity light including GI Pipe of approx 1 mtr length and suitable size, LED light of capacity 25 watt including weather protection cover nut, bolt and connected accessories complete all as specified and directed

S&F in repair single phase direct connection type KWH meter , temper proof, plastic body with LCD display, 230/240V, 5-30 Amp, accuracy class I, 50 Hz, Conf to IS 13779, IP 54, with (parameters to show Date, time, current reading, KW, PF) in existing position by providing wooden board wooden board first quality of size 250 mm x 300 mm, including making complete elctric connections complete all as specified and directed. Make : Secure/HPL/ L&T Note : Old meter to be deposite in AGE E/M store.

S&F in repair Three phase direct connection type KWH meter , temper proof, plastic body with LCD display, 230/240V per phase , 5-30 Amp, accuracy class I, 50 Hz, Conf to IS 13779, IP 54, with ( parameters to show Date, time, current reading, KW, PF) in existing position by providing wooden board wooden board first quality of size 250 mm x 300 mm, including making complete elctric connections complete all as specified and directed. Make : Secure/HPL/ L&T Note : Old meter to be deposite in AGE E/M store.

Supply and fixing of LED tube rod of 20/22 watt T-8 type, 220 volt, 50 Hz, one side connection including connecting wire of Approx 0.6 mtr, nut, LED lamp, wire all connecting accessories complete all as specified and directed.

S&F 9 Watt LED bulb, 220 volt, 50 Hz complete all as specified and directed.

S&F 1 sq mm X 3 core suitable multi stranded copper conductor flexible wire FRLS, 220volt, 50 Hz complete all as specified and directed.

S&F Hanging Rod of 1 or 2 feet sizes for fan, rubber type, suitable for hanging ceiling fan, complete all as specified and directed.

S&F MS Screws of required sizes for mounting / tightning electric boards, complete all as specified and directed.

Supply and replacement of 3 pin plug top AC-230 v 15 Amp. complete all as specified and directed.

Supply and replacement of 3 pin plug top AC-230 v 5 Amp. complete all as specified and directed.

S&F in repairs laminated hylum sheet cover, ISI marked of Make" Hylem" cut with grooves for mounting of fittings like switches, sockets, fan regulators etc. including fixing in location with new galvanised screw and cup washer complete all as specified and directed of following sizes :

11 x 13 inches

9 x 11 inches

5 x 8 inches

5 x 5 inches

S&F in repairs the following spares of geyser and testing after replacing the defective part for proper functioning of gyser complete all as specified and directed:-

Thermostat ISI marked Make : Danfoss / Ranco / Indfoss

Triangle Heating element 1.5 KW, ISI marked Make : Bajaj / Usha/Theta

Triangle Heating element 2 KW, ISI marked Make : Bajaj / Usha/Theta

Indicator lamp with flexibe copper wire of suitable size Red/Green

Round Heating element 1.5 KW, ISI marked Make : Bajaj / Usha/Theta

Round Heating element 2 KW, ISI marked Make : Bajaj / Usha/Theta

S&F PVC Connection with steel reinforced pipe for hot water connection of Size 18" x 1/2" including rubber washers complete all as specified and directed.

Supply and fix cable 2.5 sq mm X 1 core multi stranded copper conductor flexible wire for garden light 220 volt, 50 Hz complete all as specified and directed.

Cleaning of roof and chajja tops, taking out vegetation and plants from bldg by using chemical/acid and making good the damaged area and removing vegetation/ debris to low lying area and making good the wall surface with cement mortar in MD accn bldg in Mil stn Bairagarh as given below :-

Building with Accesible roof

Building with Non Accesible roof

Cleaning of RCC/ pipe culvert of any length by taking of mud/any type of debris n.exe 1.5m wide and 1.5 m depth by using mechanical equipment and removing spoil n exe 200 m including making good damaged surface with cement mortar in Bairagarh Mil Station complete all as specified and directed.

Cleaning of Mud/Vegetation / Debris/ any type of dirt in drain (RR masonary/ Brick masonary/RCC or any type) and removing spoil exe 100 m and nexe 200 m depth in Bairagarh Mil Station complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles complete all as specified and directed.

Demolition of cement concrete in floors and paving n.exc 15cm thickness (below or above glround level) complete all as specified and directed.

Demolition of reinforced cement concrete, RCC drain, slab beam etc. of any description complete all as specified and directed.

M&L for excavating in trenches not exc 1.5 wide and not exc 1.5 m in depth for foundation and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , subbase concrete complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Providing Cement concrete Type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in coping complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) using 20mm graded aggregate Type A1, 1:11/2:3 as in slabs supported on walls, beam complete all as specified and directed.

Use and waste form work to slabs over drain n. exc 200mm thick complete all as specified

M&L TMT steel bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including formwork, chamfers, weatherings, throating etc. and Set in cement mortar 1:4 complete with joints to match complete all as specified and directed.

Returning filling in with excavated soil of any type including spreading, leveling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated material from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm as in weep holes complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs. 291330.00