NIT No GE/ND-66/2025-26

Amount

B&R PORTION: Supply and fixing wood grooved panel having system NRC up to 0.88 with lineal perforation. The high grade MDF panels shall be melamine laminate of size 2440mm x128mm x 16mm with 2mm groove at 14mm pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3(base panel confirming to IS 12406 and laminated panel confirming to IS 14587). The back of the panels are perforated with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is fixed by using GI Framework 2400mmx50mmx0.50mm spaced at 600mmx600 c/c & 16 mm Ply framework spaced at 400mm centers with suitable brackets and the system is backline with 50 mm Roxul Rockwool insulation@48kg density and along with all accessories or Screw the aluminum extruded profile for channeled woodworks provided by manufacture over the lowest and second wooden batten at an on- center distance of 600mm. Install the first set of wooden panels by inserting the clips for border channeled woodworks and insert the groove of the panel into the projecting flange of the aluminum clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channeled woodworks into the next keel till the actual height is achieved. Use clips for border channeled woodworks to finish off the installation, complete all as specified and directed.

Demolition of brick work built in Cement morter or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames of size exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames of size not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, using old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid joint less coloured SGVT tiles 10mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.74 sqm (1200x600mm), in floors/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (DGVT tiles), area of each tiles not exceeding 0.36 sqm (600x600), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

M&L for Granite (of any type) 20 mm thick as in floor, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Granite (of any type) 20 mm thick machine cut,as in kitchen slab cooking platform shelves, skirtings, dado, window cills etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engg in charge.

M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD Land complete all as specifeid and directed.

M&L for 15mm thick rendering on fair or other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished complete all as specifeid and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil emulsion distember over and including two coat of wall care putty finished even smooth and uniform surface over a coat of primer complete all as specifeid and directed.

M&L for complete removal of old plastered wall surfaces and applying two coats of oil emulsion distember over and including two coat of wall care putty finished even smooth and uniform surface over a coat of alkali resistant primer complete all as specifeid and directed.

M&L for preparation of old plasterd wall surfaces and applying two coats of wall putty finished even smooth and uniform as per manufactures instructions, surfaces to be finished even and smooth over a coat of primer and applying two coats of exterior emulsion first quality of approved colour complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F Sheet glass 5.50mm thick ordinary quality and glazing with oil putty/glazing clips in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No QQT-7053 or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No KUB-35041 or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No FLR-5169 or equivalent of make as specified in PS.

S&F in repairs chromium plated AVS health faucet Jet spary for water closet including 15mm bore PVC connecting pipe 1.2m long with check nut and washers complete all as specified and directed.

S&F in repairs chromium plated finish paper holder complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKB-35753 or equivalent in GEM/MARC.

S&F in repairs 600 mm long C P finish CP Towel Rail D type complete in all respect complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No CAN-1121N or equivalent of make as specified in PS.

S&F in repairs vitreous china wash hand basin counter top type of size 705mmX450mmx200mm in 18 mm thick granite (of any type) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm complete all as specified and directed.

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed.

S&F in repairs Soap dispensor with removable bottle complete all as specified and directed.

S&F in repairs floor mounted coupled star white one piece water closet (Pedestal pattern) (Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set, incl flushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti siphonage pipe etc. complete in all respect complete all as specified and directed. Make : Hindware/ CERA / Jaquar or equivalent.

S&F Vitreous China urinals, half stall bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Urinal spreader of brass chromium plated any for fixing with 15 mm dia pipe complete all as specified and directed.

Dismantling wall and ceiling boards of any description as in panelling any thickness, including cover fillets in any surface complete all as specified and directed.

S&F GI frame work for decoraive type seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspeneded from soffit at approx 900mm center to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to centre including providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish formulated jointing compound and 48mm wide fibre tape to provide seamless finish including preparation of newly surfaces of ceiling and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty complete all as specifeid and directed by Engineer in charge.

M&L for Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

S&F in repairs Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floors for 100mm bore complete all as specified and directed.

S&F in repairs Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floors for 75mm bore complete all as specified and directed.

S&F in repairs Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 100mm bore complete all as specified and directed.

S&F in repairs Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 75mm bore complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal from site complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed.

S&F 20 mm dia Brass Elbow complete all as specified and directed.

S&F Union 16 / 20 mm complete all as specified and directed.

S&F 20 mm dia Brass Tee complete all as specified and directed.

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F in repair modular switch 230/250 volts grade one way SP 6 Amp rating complete all as specified and directed. Make: Legrand Cat Part No 573400/ Havells Cat Part No ACNSXXE101/ Schneider Cat Part No X1001WH.

S&F in repair ceiling rose 3 phase, PVC, polycarbonated, isolated body ISI marked complete all as specified and directed.

S&F in repair submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSH type, 1100 volts grade 2 x 4 sqmm complete drawn in existing conduit along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates. Make: RR Kabel/ Polycab/ Havells/ KEI/ Gloster/ Finolex

S&F in repairs MCB SP 6 to 32 Amp, 240V 10KA, B curve/C curve as per site requirement and current carrying capacity in the MCB DB complete with connection testing complete all as specified and directed. Note: Make of MCB will be same as that of DB.

S&F LED Tube Light of 16-20 Watt 230Volt (approx size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating complete all as specified and directed. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT/ Crompton cat Part No CCS-100-20-65-HL2-OP-NWH/ Phillips Cat Part No BN308C LED20S-6500 L120 PSU WH

S&F LED Tube light fitting 8-10 watt (approx size 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating complete all as specified and directed. Make : Bajaj/Orient/Philips/Crompton

S&F in replacement of LED Grandeur single wall light fitting warm white of 10 Watt 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat Part No 58071 or equivalent in Jaquar, Orient, White teak company.

S&F in replacement of aesthetically designed muziris decorative warm white LED pictur light/mirror light of 07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and directed. Make: Philips Cat Part No 31402 or equivalent in Jaquar, Orient, White teak company.

S&F in replacment PVC body Exhaust Fan 250 mm Sweep, 230 Volt, AC 50 HZ including louvers. The rate includes making proper arrangement for fixing i.e. cutting bricks/stone boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed. Make : Usha style name modern Crisp Air VX/ Bajaj maxima 250 /Havells Ventil Air DX.

S&F in replacement of LED Grandeur three head pendant hanging light fitting warm white of 10 Watt each lamp 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat Part No 58072 or equivalent in Jaquar, Orient, White teak company.

S&F in replacement 7 watt Deep Recessed LED fixed/Adjustable downlighter. Luminaire made of die cast aluminium housing heat sink with Glossy Facetted diffuser. The luminaire should have CRI > 90 and CCT of 3000K. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%.Luminare Operating Temp should be -10 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 4.0 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed by Engineer in charge. Make: PHILIPS : SmartBright Accent PRO RS262B OR EQUIVALENT Trilux/Endo

Supply, installation, testing & commissioning of remote controlled BEE 5 star rated BLDC Ceiling Fan of 1400 mm sweep, with remote, having minimum air delivery of 260 CMM, operating at 230 volts, 50 Hz, power factor not less than 0.9, insulation resistance greater than 1.5 mega ohm, having full copper motor & powder coated ribbed aluminium blades for higher air delivery, longer life complete with all the accessories including making arrangement to hanging of fan to ceiling with proper hook, nut, bolts, safety pin & remote stand, complete all as specified & directed by Engineer-in-Charge. Make: Atomberg Efficio model No EFC21435RM or equivalent in Havells, Crompton, Bajaj, Orient, Polycab, Superfan, Anchor having minimum CMM 260. Note. (i) Price of remote hanging stand is deemed to be included in this rate. (ii) Colour of fan shall be approved from user before placing order of the fan. Note: (a) Srl Item No 01.00, 09.00 to 11.00, 19.00, 21.00, 34.00, 38.00 & 65.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

ETERNITY PROJECT (BID ID -3440537)

sony engineering works (BID ID -3434179)