COMPREHENSIVE REPAIRS OF BLDGS UNDER AOR OF AGE BR DETT B OF GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) M & L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections, complete all as specifed and directed.

M & L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections, complete all as specifed and directed.

S & F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor, complete all as specified and directed

S & F in repairs 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed

M & L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old tile complete all as specified and directed.

S & F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed.

S & F in repair for vitreous China water closet (squatt pan) Orrisa pattern 680 x 470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.

S & F in repairs vitreous china full stall urinals, white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe all as specified and as directed.

S & F in repairs vitreous china urinals, flat back of size 465mm x 355mm x 265mm, white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe, complete all as specified and directed.

Supply and fixing in repairs viterous China water closet pedestal pattern in one piece type of dimension 73cm x 36cm x 74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements complete all as specified and as directed.

S & F in repairs for sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including waste pipe, fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repairs for viterous China wash basin, white flat back, size 550 x 400mm including waste pipe, CP Pillar taps, waste chain and plug and porcelan stopper brackets complete all as specified and as directed.

Supply and fixing in repairs viterous China pedestal wash basin, white flat back, including waste pipe, CP Pillar taps, waste chain and plug and porcelan stopper brackets complete all as specified and as directed.

All as above item No. 15 but counter top type, complete all as specified and directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed.

S & F in repair for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F rotational moulded polythene three layered water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity fixed with brass tank nipples, including ball brass valves suitable for 20 mm bore complete all as specified in SSR Part I incl dismantling of existing tank and removing to store, complete all as specified and directed.

S & F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with brass tank nipples, including ball brass valves suitable for 20 mm bore complete all as specified in SSR Part I Incl dismantling of existing tank and removing to store, complete all as specified and directed.

S & F in repair 15mm chromium plated health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc complete all as specified and directed.

S & F in repair 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe, complete all as specified and directed.

S & F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

S & F in repair PVC waste pipe 600/900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia for wash basin and flushing cistern with SS nuts of length 600 mm, complete all as specified and directed.

S & F in repair for 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S & F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S & F in repair Glass corner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specified and directed.

S & F in repair assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3 - 4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mm x 750mm x 250mm of standard pattern and approved make, complete all as specified and directed.

S & F in repair for chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, fixed with screw wooden/plastic cleats, complete all as specifed and directed.

S & F in repair SS Towel Ring, complete as specified and directed.

S & F in repairs concealed type CP Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pressure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specifed and directed.

S & F in repair 15 mm dia CP bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specifed and directed.

S & F in repair 15 mm dia CP two way bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specifed and directed.

S & F in repairs 15mm dia CP angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specifed and directed.

S & F in repairs gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specifed and directed.

S & F in repairs gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specifed and directed.

S & F in repairs premium multipurpose wall mounted storage cabinet with mirror of hard thermosetting plastic of size 600 x 450mm, fitted with superior quality distortion free 4mm thick mirror, complete as specified and directed.

S & F in repair CP grating with floor trap suitable for 75 mm bore floor trap and fixed with white cement in square or circular shape and with provision of hole for waste pipe connection, complete as specified and directed.

S & F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repairs for 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete as specified and directed.

S & F in repairs for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed, complete as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.

Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed.

S & F for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings.

S & F for aluminium powder coated of any colour window and ventilator with one or more shutters fixed/ side hung type without sash bar, aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B - 21 100mm long, suitable handle, alum tower bolt complete all as specified and directed.

S & F for aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/coloured/frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B - 21 100mm long, suitable handle, alum tower bolt including mortice lock and brass door stopper, complete all as specified and directed.

S & F for aluminum powder coated of any color three track sliding window with two or more shutter including 5mm thick plain/coloured/frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, SS hinges type B - 21 100mm long, suitable handle, alum tower bolt and using sections as given in 'JINDAL' catalog, including making good to the disturbed portion complete as specified and directed.

Supply and fixing factory made uPVC any colour three track three panels sliding window with fly proof S.S wire mesh (two nos. glazed & one no. wire mesh panels) upto1.50 m height made of (big series) frame116 x 45mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above1.75sqm) comprising of uPVC multi ­ chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerrance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F for aluminum powder coated of any color fixed partition with frame of size 101.6mm x 44.45mm x 1.27mm thick and 101.60mm x 44.45mm x 1.20mm thick with total height up to 3.20m. The panels shall be made out of 5mm thick plain/tinted (frosted) glass in top & bottom or ACP sheet including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminum snap beading screw etc including dismantling of existing partition of any type and making good to the disturbed portion, complete all as specified and directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates, complete all as specified and directed.

All as per Item No 56.00 here-in-before but frame size of 105 x 60mm.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, holdfast and concrete bed block complete with outer side glazing bars shutter and inner side wire mesh shutter including glass panes, dovetailed or welded, complete all as specified and directed.

All as per Item No 58.00 here-in-before but without glazing bars.

S & F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410 - 0 or Fe 310 - 0, complete all as specified and directed.

S & F in repais 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S & F factory made second class hard wood 35mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S & F 35mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

M & L for factory made 100% Solid WPC Door Frame 125 mm x 65 mm Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners/Hold Fast of required dia and length, all as per specifications drawings. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed.

M & L for factory made 30mm thick 100% Solid WPC laminated moulded Door shutter of required size of comprising of virgin PVC resin of K Value 57 - 60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with having minium density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N, (face) & 1100N (edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer free, water/Moisture Proof & Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless butt hinges of required sizes with necessary full body threaded star headed counter sunk SS screws, Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F in door closer hydraulically regulated, aluminium (extruded section body) desigtnation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed.

S & F in repairs Mild steel mortice lock, vertical type, size 100 mm, 4 levers in aluminium door, complete all as specified and directed.

M & L in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S & F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n . Exc 0.50 sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads, complete all as specified and directed.

S & F in GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S & F in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface including preparation, complete all as specified and directed.

S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified and directed.

S & F in repair SS curtain rod 25mm dia (of approved colour and design), complete all as specified and directed.

S & F in repair curtain brackets with finials of SS type (of approved colour and design) including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls), complete all as specified and directed.

M & L for 75mm thick plain cement concrete type C - 2 1:3:6 (using 40 mm graded stone aggregate) as in sub base for tiling, including demolition of old concrete of any type, complete all as specified and directed.

M & L for Vitrified Ceramic tiles double charged 10 mm thick with highlighter tile of approved colour polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.

M & L for vitrified ceramic tiles light shade (premium quality) 9 - 10 mm thick with highlighter tile (square/ rectangular) polished, area of each tiles n exc 0.36 sqm incl dados/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tile, complete all as specified and directed.

M & L for providing Mirror polished kota stone slab flooring 18 - 20 mm thck over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old kota of any type, complete all as specified and directed.

M & L for Machine cut kota stone slab (mirror polished) flooring 18 - 20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:3 after dismantling old unserviceable skirting, complete all as specified and directed.

M & L for non - skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:3) including dismantling of existing tile, complete all as specfied and directed.

M & L for coloured glazed ceramic tiles with highlighter tile in between vertical surface 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:3), including dismantling of existing tile complete all as specfied and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M & L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as speified and as directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.

All as per Item No 92.00 here-in-before but except stone. Note: Stone retrieved from item No 89.00 will be re-used.

M & L for rendering 20mm thick in cement mortar 1:4 on stone surfaces of walls any type and any height finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for Rendering 15 mm thick on fair faces of brick, stone or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a one coat primer, complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for 3 mm thick wall care putty on wall, complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortar 1:4 with water proofing compound @ 3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement, including chicken wiremesh wherever required and rendering height up to four (04) storey building complete all as specified and as directed. Note: The rate shall included the cost of integral water proofing compound.

M & L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of apex ultima over and including a coat of primer, complete all as specified and directed.

M & L for Complete removal of existing treatment from old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make, complete all as specified and directed.

M & L for preparation of old decorated plastered surface of Ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash, complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) including demolition of old concrete, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

M & L for MS tubular pipes, joist, channel, angle, tee section, fixed independently, without connecting plates etc (cut to ordinary length ie within 20mm of the length indicated) conforming to Fe 290 grade E-165, complete all as specified and directed.

M & L for preparation of new of previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a one coat of red oxide primer, complete all as specified and directed.

S & F of pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S & F for pre-painted coloured galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S & F Pre - painted coloured galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa for roofs, bent to a curve of any radius with specified side lap as per manufacturer instruction, including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S & F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall/ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification including dismantling of old unserviceble PVC lining of any type complete all as specified and directed.

S & F in repairs tuffened glass 12 mm thick as in hinged doors, partitions automatic doors and similar work with all stainless steel accessories as per site requirement including cutting to shape, drilling holes as required, complete all as specified and directed.

S & F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stitching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing ceiling board and making good the disturbed surface, complete all as specified and directed.

Providing and fixing 12 mm thick Gypsum Board sheets fixed to GI/ MS Channel section withfixing screws adhering to ceiling at same level with all required framimg and accessories. All joints shall be sealed and finished with wall care putty and two coats of oil bound distemper of approved and shade, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, ends, swan - necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints in eaves gutters, with all fittings such as elbow, Equal Tee, coupling, 'Y' Tee etc, Including MS clamp and holding arragment for MS steel, complete all as specified and directed.

Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS - 456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen (85/25 penetration) confirming to IS - 702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid across the slope from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS - 702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed.

Sch 'A' Part-II (E/M works) Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site, complete all as specified and directed.

M&L for point wiring for one light point/fan point / One bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and caping medium grade with all fittings (ISI Marked) upto ceiling height and on surface at ceiling, controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L for point wiring for one 3 pin 5A socket outlet on same board controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing caping medium grade with all fittings (ISI Marked) including CI/MS box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L for point wiring for one 3 pin 5A socket outlet independent controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing caping medium grade with all fittings (ISI Marked) including CI/MS box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L for point wiring for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including non metalic rigid PVC casing caping medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L for switch piano flush button single pole one way 5 amps 240 volts, complete all as specified and directed.

M&L for socket 5 amps 5 pin flush type, 230 volts, complete all as specified and directed.

M&L for switch socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts, complete all as specified and directed.

M&L for ceiling rose surface bakelite 2 to 3 terminals, complete all as specified and directed.

& F Angle Lamp holder insulated body with back plate for batten fittings and including one 15 Watt LED Bulb non dimmable B-22 cool daylight, complete all as specified and directed.

M&L in repairs for LED Tube light fitting, complete with 1x 20 watts, 4 feet. Decorative LED lighting fixture with Ultra bright, glass shell or PVC, glare free, wide angle, double side connection retofit LED tube with G13 lamp holders, environmental friendly, energy efficient including 20W LED tube with double side connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, complete all as specified and directed.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR Part I 2009, complete all as specified and directed.

M&L in replacement Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. Note:- MCBs will be measured separately.

Supply and fix in replacement MCB single pole 240 volts any rating from 5 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables, complete all as specified and directed.

M&L in replacement MCB single pole & neutral 240 volts any rating from 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables, complete all as specified and directed.

Supply and fixing in repairs Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, complete all as specified and directed.

Material and labour replacement of service cable of size 10 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular, complete all as specified and directed.

M&L for House Service bracket (hook type) complete with 3.0 mm long G.I pipe 40 mm dia (light grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. Note :- The unit rate shall be deemed to include for :-(a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortor 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall).

S&F of ceiling fan AC single phase 230/240 volts, 5 star rated and accessories 1200 mm sweep with suitable hanging arrangment for fan, complete all as specified and directed.

Supply. laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminum conductor of size 16 sq mm 2 core including taking out of old cable, complete all as specified and directed.

Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up, complete all as specified and directed.

KANWAL KUMAR GUPTA (BID ID -3484191)

M/s Chopra Constructions (BID ID -3492961)