Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAdmitted-Finance | ₹4.0 L | L1 | Admitted-Finance |
| 2 | L2₹4.2 L+₹23,500 (5.93%)Admitted-Finance | ₹4.2 L+₹23,500 (5.93%) | L2 | Admitted-Finance |
| 3 | L3₹4.3 L+₹30,500 (7.69%)Admitted-Finance SHADIPUR NEAR CORPORATIVE BANK SHADIPUR SOUTH ANDAMAN ANDAMAN NICOBAR 744106 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744106 | ₹4.3 L+₹30,500 (7.69%) | L3 | Admitted-Finance |
| 4 | L4₹4.7 L+₹71,500 (18.0%)Admitted-Finance | ₹4.7 L+₹71,500 (18.0%) | L4 | Admitted-Finance |
| 5 | L5₹5.0 L+₹98,500 (24.8%)Admitted-Finance BATHU BASTI PORT BLAIR PIN 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹5.0 L+₹98,500 (24.8%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SHRI BALAJI ENTERPRISES L1 | M/S TRIPATHI AND BROTHERS L3 | ARJUN MANDAL L2 | SONA MONA TRADERS L4 | LIPIKA CONSTRUCTION L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing and making L shaped Office table consisting of main table 1.8m x0.80m and side return 0.8mx0.6m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles. | 2 | each | 31,000 ₹62,000 | 35,500 ₹71,000 | 35,000 ₹70,000 | 30,000 ₹60,000 Lowest | 35,000 ₹70,000 |
| 2.00 | Providing and making Tshaped Office cubicle consisting of main table 2.5m x0.60m and cross panel of 0.8mx0.4m width made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles. | 1 | each | 38,000 ₹38,000 | 33,500 ₹33,500 | 33,000 ₹33,000 Lowest | 60,000 ₹60,000 | 65,000 ₹65,000 |
| 3.00 | Providing and making Plus shaped Office cubicle with central divider panel of 2.9m length x0.40m height above the table levelcomprising of 4 nosL shaped work station each having main length 1.45 mand 1 side return of 0.93 m with work top with 0.60m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles. | 1 | each | 88,000 ₹88,000 | 74,500 ₹74,500 | 74,000 ₹74,000 | 60,000 ₹60,000 Lowest | 65,000 ₹65,000 |
| 4.00 | Providing and making L shaped Office table consisting of main table 2.25m x0.80m and side return 0.9mx0.6m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles. | 1 | each | 33,000 ₹33,000 | 25,000 ₹25,000 | 23,000 ₹23,000 Lowest | 40,000 ₹40,000 | 35,000 ₹35,000 |
| 5.00 | Providing and making wall mounted file storage cabinet of overall size 1.8m(L) x0.80m(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. | 2 | each | 20,000 ₹40,000 | 15,000 ₹30,000 | 14,000 ₹28,000 Lowest | 25,000 ₹50,000 | 30,000 ₹60,000 |
| 6.00 | Providing and making wall mounted file storage cabinet of overall size 2.40m(L) x2.10m(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. | 3 | each | 23,000 ₹69,000 Lowest | 42,000 ₹1,26,000 | 40,000 ₹1,20,000 | 45,000 ₹1,35,000 | 40,000 ₹1,20,000 |
| 7.00 | Providing and making wall mounted file storage cabinet of overall size 1.65m(L) x0.80(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. | 1 | each | 28,000 ₹28,000 | 17,000 ₹17,000 Lowest | 17,000 ₹17,000 Lowest | 25,000 ₹25,000 | 35,000 ₹35,000 |
| 8.00 | Providing and making wall mounted cabinet of overall size 2.90m(L) x2.55(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. | 1 | each | 38,500 ₹38,500 | 50,000 ₹50,000 | 55,000 ₹55,000 | 38,000 ₹38,000 Lowest | 45,000 ₹45,000 |
Tender Value
₹4.2 L
EMD Value
₹8,420
Closing Date
6 Sept 2025, 6:55 pmClosed
Deputy Conservator of Forests
Wildlife Division Haddo
Setting up of cubicles along with wall mounted file cabinet in the newly constructed Range Office above store godown at NPIC Haddo
2025_DCFWL_19759_1
WL/G-14/8(A)/1570 dated 29.08.2025
Open Tender
Construction Works
Works
30 days
DCF Wildlife
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹8,420
8 Sept 2025
29 Aug 2025
8 Sept 2025
29 Aug 2025
6 Sept 2025
29 Aug 2025
Amount
Providing and making L shaped Office table consisting of main table 1.8m x0.80m and side return 0.8mx0.6m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.
Providing and making Tshaped Office cubicle consisting of main table 2.5m x0.60m and cross panel of 0.8mx0.4m width made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.
Providing and making Plus shaped Office cubicle with central divider panel of 2.9m length x0.40m height above the table levelcomprising of 4 nosL shaped work station each having main length 1.45 mand 1 side return of 0.93 m with work top with 0.60m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.
Providing and making L shaped Office table consisting of main table 2.25m x0.80m and side return 0.9mx0.6m made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing. The table shall include provisions for shelves to accommodate UPS, CPU.The table shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.
Providing and making wall mounted file storage cabinet of overall size 1.8m(L) x0.80m(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing.
Providing and making wall mounted file storage cabinet of overall size 2.40m(L) x2.10m(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing.
Providing and making wall mounted file storage cabinet of overall size 1.65m(L) x0.80(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing.
Providing and making wall mounted cabinet of overall size 2.90m(L) x2.55(H)x0.40m(D) with internal shelves,side panels and shutters as per approved design made of HDHMR 17 mm thick of approved quality one side laminated with 1 mm thick wooden shade laminate and other side finished with balancing liner including all necessary edge banding with PVC tape, screws,adhesives hardware fitting,cutting ,fixing and polishing of exposed edges wherever required as per architectural drawing.
ARJUN MANDAL (BID ID -58102)
M/S TRIPATHI AND BROTHERS (BID ID -58104)
SONA MONA TRADERS (BID ID -58114)
LIPIKA CONSTRUCTION (BID ID -58116)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .