SPECIAL REPAIR TO BLDG NO P 12 AND P 14 OFFRS MD ACCN AT 151 BASE HOSP UNDER GE GUWAHATI

Amount

Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified & as directed.

Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of exc 1 and n.exc 2 Sqm each complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.

M&L for rendering 10mm thick plaster on fair faces of brick or concrete surfaces in CM (1:4), finished the surface fair and even complete all as specified and directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

S&F second class hard wood plain, solid, straight Chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a) complete all as specified and as directed.

S&F solid PVC frame size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified & as directed.

S&F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm aluminium anodised sliding door bolt , with hasp and staple, (bolt type) and fixing clips of sheet steel , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 150 mm long aluminum handle cast type anodised.complete all as specified & as directed.

S&F 100 mm long aluminum handle cast type anodised.complete all as specified & as directed.

S&F 100 mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified & directed

S&F 75 mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified & directed

Supply and fixing Powder coated aluminium frame for doors, windows, ventilators, partitions (thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.40 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.

S&F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as spfd and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc. (Dismantling, Laid dry or laid and pointed) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) including disposal of the debries complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in PCC under layer complete all as per specified and directed

M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc including screed bed of 15 mm thick in cement sand mortar (1:6) complete all as specified and directed.

Material & labour for 20mm thick marble tiles machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry including cutting and polishing of type including 15mm thick screed bed in cement morter (1:6) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection/paving, finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

M&L non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick backing course in cement mortar (1:6) complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over and including 50mm thick sand bed layer complete all as specified and as directed.

M&L for water proofing treatment to sunken slabs following courses of treatment/specification (i) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementotous compound @ 0.253 kg/sqm. This layer shall be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementotous compound @ 0.126 kg/sqm. This layer shall be allowed to air cure for 48 hours. (iii) 200 micron thick polythene film pasted with the help of adhesives shall be provided over the treatment complete all as specified & directed. Note:- Waterproofing work shall got executed through authorised applicator.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as filling in sunken floor complete all as specified and as directed.

Supply and fixing Mild steel framed work of angle or other section as in gusset plates, rails braces, wind ties, cleat, hold fasts etc, complete as required conforming to Fe-290 Gde E-165 complete as specified and directed

S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. with and including one shop coat of zinc chromate primer paint complete all as specified & as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of old treated surface of iron and steel work over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60cm long between the flange fixed complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

S&F 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

S&F 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

S&F 25 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including taking down old tank complete all as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-Iincluding taking down old tank complete all as directed.

Supply & fixing 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and as directed

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

M&L 18mm thick block board, grade 2 quality, interior grade, decorative type with decorative face veener on both sides, fixed with screws to timber frame work complete all as specified & as directed.

S&F in repair brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specifed and directed.

Supply and fixing vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed.

Supply and fixing pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm dia Bib cock fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated fancy type, 15 mm bore stop valve (concealed Type), screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion over a coat of primer including over a coat of 1.5mm thick wall care putty complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete as per manufactur's instructions complete all as specified and as directed

Material & Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion with 1mm POP putty on plastered surface to make smooth surfaces complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixure of bitumen with clean dry sand (1:1) by weight complete all as specified and as directed.

M&L for 40 mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in pedding complete all as per specified and directed

M&L for bituminous primer @ 0.30 KG/Sqm over the cement plaster including preparation of surfaces as per manufacturers instruction complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

Supply and fixing Hand Shower ABS body (Health Faucet) with 8mm dia 1.2 metre long flexible tube with wall hook complete all as specified and as directed. Make-Jaquar Cat No. ALD-573 or equivalent make as specified in particular specification

Supply and fixing in repair toilet paper holder, brass chromium plated,with stainless steel strap fixed to walls with chromium plated brass screws complete all as directed. Make-Jaquar Cat No. AKP-35751P or equivalent make as specified in particular specification

S&F in repair reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as directed Make PARRYWER Cat No- C 8611 or equivalent make as specified in particular specification

Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and as directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, etc complete all as specified and directed.

S&F powder coated anodised aluminium interlocking snap grid frame work size (600 mm x 600 mm) consists of main tee runners of size 38mm x 25mm x1.5mm and cross wall angle of size 25 mm x 25 mm x 1 mm spaced between the main Tee at 600 mm centre to centre to form a grid of 600 mm x 600 mm etc complete including necessary notching preparing holes and supporting hanger comprising of J hooks soffit cleat holding clip, level clip etc as per manufacturer instructions complete all as specified and directed.

M & L for 4 mm thick, Non asbestos fibre cement building boards, classic design board like cascade or Occenic of make Everest or Equivalent fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed.

S & F in repair 20mm bore curtain rails, mild steel, chromium plated with fixing brackets,knob, stops, rollers including side holder etc, complete all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and directed

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.25 mm MS sheet for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated sheet cover including cutting chases pining in for concealed conduit wiring amd making good of disturbed surface complete for the following srl item No. 92.10 to 92.60 :-

One light/fan/ Bell point controlled by one one way switch complete all as specified and as directed.

One light point controlled by two 2 way switches complete all as specified and as directed.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables

One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed.

All as per item No. 92.00 above but wiring with 4.0sqmm multistranded copper conductor unsheathed and 4.0sqmm copper conductor unsheathed cable as earth continuity conductor for 3 pin 16 Amps socket combinationon independent board complete all as specified and as directed.

M&L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLS) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed and conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length.

M&L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLS) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of concealed conduit with accessories shall be measured as one length.

Supply and fixing LED Tubelight lights fitting 1x 20/22W, 220V, AC decorative box type with CRCA body precoated white and pre wired for driver, holder connecting up with LED down rod with three core flexible copper conductor cable of suitable size from ceiling rose including 1x20/22W LED tube rod complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing as in repair 10W LED Bulkhead light,pressure die cast housing LED bulkhead with IP65 Protection and IK09 Impact resistance suitable for surface/wall mounted,complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting with LED bulb of 10 W complete all as specified and as directed.

Taking down existing ceiling Fans any make and size/any condition, cable end, dismantling blade and removing fan and blade to store and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc, cleaning, refixing the same in serviceable condition after completion of repair works in old or new location including provision of cable of required length from ceiling rose or connector to fan complete all as directed.

Taking down existing exhaust Fans any make and size/any condition, cable end, dismantling blade and removing fan and blade to store and cleaning, refixing the same in serviceable condition after completion of repair works in old or new location including provision of cable of required length from ceiling rose or connector to fan complete all as directed.

Supply and fixing Ding Dong AC 230 Volts single pole. complete all as specified & as directed.

Supply and fixing Modular switch one way 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed.

Supply and fixing Modular switch two way 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed.

Supply and fixing Modular Bell push 6A 1 module complete all as specified & as directed.

Supply and fixing Modular socket 2/3 pin plug, 6 Amps, 2 module 240 Volts complete all as specified and as directed.

Supply and fixing Modular switch, one way, 16 Amp, 1 module 240 Volts complete all as specified and as directed.

Supply and fixing Modular socket 16A, 6 pin, 3 modulee, 240 volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.

Supply and fixing modular electronic fan step regulator, 2 module, 120W, A/C 240 Volts complete all as specified and as directed.

Supply and fixing as in repair Factory made board distribution in sheet steel enclosure vertical double door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed.

Supply and fixing MCB, TPN, 415 volts, C Curve, 63 Amps, 10 KA,4P complete all as specified and as directed.

Supply and fixing MCB, SPN, 240 volts, C Curve, 32 Amps, 10 KA, complete all as specified and as directed.

Supply and fixing MCB, SP, 240 volts, C Curve, 20-32 Amps, 10 KA, complete all as specified and as directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 32 Amp rated capacity complete all as specified and as directed

Material and labour for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for taking out/laying UG cable etc. n exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing excavated surplus materials (Soils) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and laying dry river sand cushioning under floor in foundation including watering and consolidation and for cable protection with a layer of 8cm deep before laying and 15cm after laying gently punned down to 10 cm on top of the cable as per SSR Part-I complete all as specified and as directed. (Note : Punned thickness shall be measured).

Material and Labour for bricks common burnt clay, building brick, sub class B designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed.

Material and labour for 40mm bore galvanized mild steel/ tubes, 'light grade, complete with all fittings; laid in trenches complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 50.0 Sqmm x 3.5core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 25.0 Sqmm x 4.0core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Supply, installation, testing and commissioning LT Panel board, TPN 415 Volts, 50 Hz, out door cubical type floor mounted CPRI approved factory made, double door dust and vermin proof IP-54, fabricated out of CRCA sheet not less than 3.15 mm thick with 2mm thick for internal conpartment duly powder coated fixed on angle iron dpedestal made out of 50x50x6 mm with cable chamber for individual feeders for incomming and outging connections, one set of LED indicator lamp RYB with switch and fuse and the panel board shall be provided with proper vetillation including suitable size of cable alley copper bus bar suitable for carrying of currect 200 Amps with suitable connections from MCCB out going to main bus bar shall be carried out with TPN copper bus bars of suitable rating and connections from main bus bar to out going MCCB's (intake point)will be carried out with TPN copper bus bar as per MCCB rating duly indulated and colour coded heat shrinkable sleeve and shall be rigidly mounted on suitable size of bridge insulator including necessary PCC foundation of minimum 0.50 m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal all as specified and directed comprising of following:- Item conitiued as Srl item No.125.10

item continued from Srl item No.125.00. (a) MCCB 160 Amps 4 pole 50 Hz 415 V with fix thermal and fixed magnetic release having rupturing capacity 10 KA - 01 Nos incoming). (b) MCCB 63 Amps 4 pole 50 HZ 415 V with thermal magnetic release having repturing capacity 10 KA - 3 Nos (Outgoing). (c) 3 Ph digital multi function meter model A class1 5A with relay Vega Series - 1 No (d) Indicating lamp 240 volts LED type - set of three.

S&F as in repair 40mm bore GI protection pipe, medium grade including all fittings laid in trenches or fixed on pole/walls with mild steel clamps, bolts, nuts and washers complete all as specified and as directed.

S&F as in repair 20mm bore GI protection pipe, medium grade including all fittings laid in trenches or fixed on pole /walls with mild steel clamps, bolts, nuts and washers complete all as specified and as directed.

S&F 40mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe including all necessary fittings complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe including all necessary fittings complete all as specified and directed.

D.B ENTERPRISE (BID ID -3420141)

SANJIB DAS (BID ID -3419818)

SHANKAR ENTERPRISE (BID ID -3419854)

PRITHWI BUILDERS (BID ID -3420498)

M/S SEWAK SINGH (BID ID -3420165)