PERIODICAL SERVICES AND ALLIED WORK IN TECH AREA AT AF STN JAISALMER

Amount

M&L for preparation of old decorated surfaces of walls, pillars, etc. including brooming down and cleaning the surfaces and applying one coat of white wash complete all as specified & as directed.

All as per item No 1 above but one coat of white wash on ceiling surface.

M&L for preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper (Oil emulsion) of approved tint all as directed.

M&L for preparing old decorated surface of ceiling including brooming down and cleaning the surfaces and applying one coat of distemper (Oil emulsion) of approved tint all as directed.

M&L for preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coat of distemper (Oil emulsion) of approved tint all as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved tint(camoflage pattern) all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of cement base paint of approved tint(camoflage pattern) all as specified and directed.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys/ any height of any description and applying two coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys/ any height of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. (Including temporary shuttering arrangement to reach upto ceiling ht of hangars) complete all as specified and directed.

M&L for rendering 10mm thick on stone / concrete block masonry surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) including taking down old plaster complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on stone / concrete block masonry surfaces other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) including taking down old plaster complete all as specified and directed.

M&L for 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finished even and smooth with out using extra cement including taking down old plaster complete all as specified and directed.

M&L for Preparing new plastered surfaces and applying two coats of oil bound distemper over priming plastered surfaces with alkali resistant priming paint complete all as specified.

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for Preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L for applying 3mm thick wall care putty on wall surface complete all as specified.

M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified.

M&L for Anodized aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mmx 600mm in size, fixed with nail to timber frame work or with staples on snap grid in ceiling, flat or sloping and including dismantling and taking down old unserviceable ceiling board complete all as specified and directed.

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris from site,etc complete all as specified.

M&L for 75MM thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.

M&L for Johnson endura tiles 30cm x 30cm x 10mm thick,set, jointed and pointed in neatcement slurry in floors with grey cement and pigments including 15mm thick screed bed in cement and sand mortar 1:6 including dismantling and removing debris from site complete all as specified and directed.

M&L for rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 grade with grey cement with pigment over and including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles of any size,25mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of grey cement and pigment over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed.

M&L for PCC type B-1, 1:2:4 (using 20mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for 100mm thick cement concerete 1:2:4 type B-1 using 20mm graded aggragete in alternate bays complete all as specified and directed.

M&L for 30mm thick Wearproof granolithic metallic hardner concrete as specified in manufacturer instructions (included metallic hardner) and as directed by Engineer -in- Charge.

Providing broom finished surface of concrete pavement and making grooves while concrete is green complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick, finished the surface even and smooth without using extra cement complete all as specified and directed.

M/S R B CONSTRUCTIONS (BID ID -3338069)

S K TRADER (BID ID -3326566)