SPECIAL REPAIRS TO ELECTRICAL WIRING AND FITTINGS FIXTURES IN BUILDING NO, P-298,P-299 AND P-300 AT 4 AFLU, SUB MAIN WIRING WITH DB IN MD ACCN , EARTHING AT VARIOUS LOCATIONS, AND CERTAIN REVENUE WORKS AT HQTC BANGALORE

Amount

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets complete as directed and removing retrieved materials and making good the disturbed surface walls, floors etc all as specified and as directed

Taking down existing light fittings of any description from wall/ ceiling including keeping in safe custody by making good the disturbed surfaces of walls all as specified and as directed.

Taking down ceiling fan/wall mounted fan/Air circulators, sealing cable end, dismantaling blades, and removing fan including painting and refix the same including connecting up and provision of cable from ceiling rose or connector to fan all as specified and directed.

Material and labour for Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, drawn through and including PVC Casing caping of suitable size, with all necessary fittings and accessories fixed on walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire connected to common earth dolly including PVC junction / mounting boxes on / in the wall / ceiling for piano switches/ switch socket combination/ fan regulators etc and GI junction box duly covered with 3mm thick hylam sheet One light/ fan point controlled by one single pole 5 Amps switch

All as per srl item No 04 Above but One switch socket out let point 5 Amps on same board with other switches

All as per srl item No 04 Above but One switch socket out let point 5 Amps on same board with other switches

All as per srl item No 04 Above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size

All as per srl item No 04 Above but One bell point controlled by one single pole 5 Amps bell push

All as per Srl tem No 04 Above but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 1.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

All as per Srl tem No 04 Above but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 4.0 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

Supply and fix Modularswitch , 1 Module single pole one way 10 Amps.

Supply and fix Modularswitch , 1 Module single pole one way 16 Amps.

Supply and fix Modular bell push , 1 Module single pole one way 6 Amps.

Supply and fix Modular switch 2 way 10A 1 module

Supply and fix modular socket , 2 Module 6 Amps 240 volts Ac 2/3 pin combined suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top all as specified and directed at site.

Supply and fix modular socket , 2 Module 6/16 Amps 240 volts Ac 6 pin combined suitable for inserting 3 pin 6/16 Amps plug top all as specified and directed at site.

M&L modular type fan regulator 120W 2 Module type heavy duty

M&L PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts , 2500 Lumens, efficiency > 110, CCT 6500k , CRI > 80 , Wall / surface mounted , IP 20 aluminium etrusion housing complete with incl connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting

Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 16 Watts , 2500 Lumens, efficiency > 110, CCT 6500k , CRI > 80 , Wall / surface mounted , IP 20 aluminium etrusion housing complete with incl connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting

Supply and fix LED recess mounted luminaire suitable for 2x2 ft grid ceiling with system wattage of 36 watts , 3600 lumnes, CCT 6500k , CRI > 80 , IP 20 , complete incl PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting

Supply and fix LED Surface mounted Luminaire system wattage of 20 watts , IP 20, Lumen output 1500 , system efficency > 85 lm/ W, color temp 6500K Heat sink housing High quality diffuser complete including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete

Supply and Fix High efficient 50 W LED Flood light fitting with pressure die cast LM6 Aluminum housing with IP66 Lumen output 3500 lu system efficiency 100 lu/w wall/ bracket mounted colour temp 5700 k and glass cover lenses specially designed for flood Lighting including provision of for fixing the light fittings complete as specified and directed.

Supply and Fix 10W High efficient LED Security light fitting with pressure die cast Aluminum housing, IP66, Lumen output 100 lu/w system efficiency 100, colout temp 5700 k ,CRI 70 , including provision of 40MM dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

Supply and laying inreplacement of sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10sqmm in and including non-metallic rigid PVC conduits and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 6.0qmm PVC insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length including taking down old unserviceable submain wiring.

Supply and laying inreplacement of sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including non-metallic rigid PVC conduits and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 1.5sqmm PVC insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length including taking down old unserviceable submain wiring..

Supply and laying inreplacement of sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 1.5sqmm pvc insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length including taking down old unserviceable submain wiring..

S&F Sheet metal enclosure for DB's double door 8 ways when MCBs to be used Triple pole and neutral,deep drawn with 200 Amps rated copper bus bar 415V, complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door 12 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed.

S&F RCCB for earth leakage protection, 16 Amps, four pole 100mA, complete all as specified and directed.

S&F RCCB for earth leakage protection, 63 Amps, double pole 100mA, complete all as specified and directed.

MCB SP, 6-40 Amps, 240V, B- series with breaking capacity of 10KA complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps 240 Volts AC

Material and labour for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, including provision of galvanised iron earth lead wire 4mm dia as earth lead connected by means of bolts, nuts, check nuts and washers of galvanised iron, provision of 40mm dia GI pipe medium grade for watering arrangement and PCC 1:3:6 type C1 chamber, MS Funnel, wire gauge, 50mm thick RCC 1:2:4 type B1 for earth pit cover with 6Nos x 8mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance not exceeding 50m, provision of charcoal and salt in alternate complete all as shown in electrical place No 3 of schedule part I 2009 all as specified and as directed and testing on completion. Note : Cost of GI earth lead and GI protection pipe up to 7.5m length shall be deemed to be included in the rate quoted for this item.

Taking down old unservicable sub main wiring copper/ Aluminium (light/power), removal from site complete all as specified and directed

Taking down old unservicable MCB DBs SPN/TPN any no of ways, removal from site complete all as specified and directed

S&F Sheet metal enclosure for DB's double door 08 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door 4 ways when MCBs to be used Triple pole and neutral,deep drawn with 200 Amps rated copper bus bar 415V, complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door 12 ways when MCBs to be used Triple pole and neutral,deep drawn with 200 Amps rated copper bus bar 415V, complete all as specified and directed.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB TPN, 32 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240V, B- series with breaking capacity of 10KA complete all as specified and directed.

Repair, fabricated and painting of old Sheet steel box made out of 2mm thick CRCA sheet powder coated of size 120x120x20cm duly compatmentalized suitable for accommodate 01 No TPN DBs and 04/06 Nos energy meter independently. Each compartment shall be provided with suitable 02 Nos fancy lock complete. Note:- TPN DB Box and Meter box shall be fixed on the location as dircted by the Engineer-in-charge and material required for fixing the box shall be provided by the contractor. Electric connection required for meter and main DB box, Painting materials, locks and other fixing materials shall be provided by the contractor and rate for the same shall be included in the quoted rates.

M&L for submain wiring with 2 runs of 6 sqmm and one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable drawn through and including non metalic PVC PVC Casing caping complete

Taking down old aluminium/ copper strip from existing location making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc,as required of 25x3.15mm aluminium strip incl removing old u/s aluminium strip and removing retrived materials and making good the distrurbed surface of wall, floor ceiling etc complete

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for building earthing etc,as required of 4mm GI wire and removing retrived materials and making good the distrurbed surface of wall, floor ceiling etc complete

Copper strip 32 x 6mm buried in ground ,Run on wall with shaddle

Supply & fix single pointed air termination Copper rod, 12 mm dia, 300 mm long including taking down the existing air termination

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and with screwed 3 Nos 8mm dia 25mm long hex head screw including takingdown the old termination from siite all as specified and directed

Supply & Installation of High Density Polymer (HDPE) earth pit chamber of dimension 308mm x 308mm x 214mm with locking cover & seal by replacing with existing chamber for earth pits

M&L for demolition including breakingup brickwork or stone boulder massonry/ built in cement mortar including all stone works and precast concrete articles carefully taking up or down and removing without damage within one meter and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100 mtr and depositing where directed at a level not exc 1.5m above the starting point and all specified

M&L for Plain Cement Concrete 75mm thick type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and as directed.

M&L for Plain Cement Concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) as in floor finish all as specified and as directed.

M & L for GI tubing of 40mm bore dia, 'Light' grade for cable protection fixed in poles/walls/laid under roads/crossing etc all as specified and as directed

M & L for GI tubing of 25mm bore dia, 'Light' grade for cable protection fixed in poles/walls/laid under roads/crossing etc all as specified and as directed

M&L for LT Panel earthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including GI Strip 25 x 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised steel as shown in electrical plate No. 5, connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric weight hot less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore, medium grade wire mesh and lugs, GI protection pipe of 15mm bore medium grade upto 7.50 mtr long test point etc all as specified and directed.

Supply & fixing and commissioning automatic system for operating the lights for percentage wise of the conference hall all as specified and directed. MAKE:Schneider.

Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc. 15 cm thickness (below or above GL) etc. complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar and archor pillars etc but excluding ashiar taclings dressed stone work and pre cast concrete articles etc. complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but incl screed bed and plaster etc. complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each, but with shutters (without taking off shutters from the frame) etc. complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each, but with shutters (without taking off shutters from the frame) and refixing in the same opening etc. complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5m in depth for foundation etc.. and getting out in soft / loose soil etc. complete all as specified and as directed.

Material and labour for cement concrete type D-2 ,1:4:8 using 40mm graded crushed stone aggregate for foundation of poles etc, complete all as specified and as directed.

M&L Pre-cast cement concrete block masonry with solid blocks of Type C1 1:3:6 (20mm graded aggregate), exc. 10 cm in width and setting in cement mortar 1:6 etc. complete all as specified and as directed.

Material and labour providing precast Re-in forced cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) set in cement mortar 1:6 as in landings cover slab (for man holes etc) chullah, hoods mangers, shelves and similar works chajjas water trough including necessary form work etc. complete all as specified and as directed

M&L for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring etc. complete all as specified and as directed.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with joint free non skid tiles including 15mm thick screed bed or bedding layer of CM 1:6 for all as laying floor finishes etc. complete all as specified and as directed.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick cement plaster in CM 1:4 on vertical faces of brick work or concrete surfaces as skirtings, dado etc. complete all as specified and as directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300 x 7mm/ 350x250x7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with joint free non skid tiles including rendering 10 mm thick cement plaster in CM 1:4 on vertical faces of brick work or concrete surfaces as skirtings, dado etc. complete all as specified and as directed.

Material and labour rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturers instructions , finished even and smooth with out using extra cement etc. complete all as specified and as directed by Engineer-in-charge. Note :- WPC will be measured and paid separately under relevant item.

Supply only integral water proofing compound

M&L for providing precast reinforced cement concrete set in cement mortar 1:6, Type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match etc. complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and as directed.

M&L for Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc. complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification etc. complete all as specified and as directed.

S&F factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification etc. complete all as specified and as directed.

S&F Steel windows or ventilators, fixed type, with glazing bars etc. complete all as specified and as directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed etc. complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type, anodised etc. complete all as specified and as directed.

S&F 125mm Aluminium anodised, barrel tower bolts of extruded section and fixed etc. complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc. complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc. complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; railings; and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and as directed.

M&L 10mm thick rendering in CM (1:6) on brick, concrete or wall surface finished even & smooth without using extra cement etc. complete all as specified and as directed.

S&F for sheet glass 4 mm thick ordinary quality, ground or obscured or frosted, on one side and glazing with oil putty in square n.exc 0.5 sqm in each pane etc. complete all as specified and as directed.

Material and labour for 9 mm thick gypsum building boards of size 600 x 600mm along with PVC laminated at back side of board with GI powder coated snap grid work of size 605mm x 605mm with main runner 28 x 19 x 0.40mm thick, cross tee 28 x 19 x 0.40mm and 23.5 x 23.5 x 1.5mm thick; and 19 x 15 x 0.40mm thick wall angles fixed to wall for ceiling incl necessary supporting with 6 mm dia G.I hangers (upto 1200mm length & 1200mm c/c distance) fixed to roof slabs, purlins/rafter etc. complete all as specified and as directed.

M & L 15 mm dia GI pipe 'medium grade' galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc. complete all as specified and as directed by Engineer in Charge.

S&F 20mm dia GI tubes, medium grade galvanised with all fittings and fixed to walls and ceilings or laid in floors etc. complete all as specified and as directed.

S&F stop valve of fancy type, chromium plated with long shank and cup (concealed type) of any colour screwed for 15mm bore iron pipe etc. complete all as specified and as directed.

S&F wash basins, Vitreous China white,(flat back type) size 550x400mm, pedestal type, excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc. complete all as specified and as directed.

S&F 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, foam flow, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and as directed.

S&F 15 mm bore bib tap 2-in-1 fancy type, chromium plated, cast copper alloy screwed down for iron pipe or brass ferrule and fixed etc. complete all as specified and as directed Make: CERA/Jaguar

S&F 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc. complete all as specified and as directed.

S&F PVC flexible Waste pipe 32mm dia and 750mm long etc. complete all as specified and as directed.

S &F waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for 32mm dia etc. complete all as specified and as directed.

S&F chromium plated Towel Ring fixed with Chromium plated brass screws etc. complete all as specified and as directed.

S&F chromium plated towel rail 600mm long etc. complete all as specified and as directed.

S&F vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked, with 'P' or 'S' trap, including supply & fixing bolt and jointing, flushing cistern and flush pipe etc. complete all as specified and as directed.

S&F 15 mm dia Health faucet with brass chrominum plated with one meter flexible pipe made out of stainless steel with wall hook arrangement etc. complete all as specified and as directed. Make: Cera/Jaguar

S&F toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws etc. complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc. complete all as specified and as directed.

S&F stainless steel gratings doom 125 mm dia with or without waste hole for waste pipe connection etc. complete all as specified and as directed.

M&L 100 mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc. complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps etc. complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps etc. complete all as specified and as directed.

S&F 75 mm PVC (SWR) bends etc. complete all as specified and as directed.

S&F 110 mm PVC (SWR) bends etc. complete all as specified and as directed.

Supply and fix 500 ltr capacity Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia ball brass valves, high pressure , with polyetghylene float ball and fly nut complete screw for iron pipe or brass ferrule and fixed etc. complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc.complete all as specified and as directed.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc. complete all as specified and as directed.

M&L Three coats of white wash on newly plastered walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for preparation of new surfaces of walls plastered or unplastered by brooming down or by steel wire brushing, and applying two coats of distemper oil emulsion over a coat of chalk whitening including 3mm thick wall care putty all as specified and as directed.

M&L for complete removal of existing treatment and necessary preparation of surfaces, and applying two coats of distemper oil emulsion over a coat of chalk whitening including 3mm thick wall care putty all as specified and as directed.

M&L for preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of Red Oxide, zinc chorme complete all as specified and as directed.

M&L for 25mm thick PCC type B-0 1:2:4 (12.50mm graded aggregate) as in flooring etc. complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of cement mortar 1:6 in 15 mm thick for laying floor finishes etc. complete

All as per item above but as in wall skirting including rendering backing coat of cement mortar 1:4 in 10 mm thick etc. complete

M&L for 15mm thick rendering on brick wall or concrete surface in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of Distempering walls with distemper oil-emulsion white or tinted over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

Material and labour for washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of Distempering walls with distemper oil-emulsion white or tinted complete incl complete removal of existing treatment all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Supply & fix MS work for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified & directed.

Material & labour for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in bed plates, bed block for inserting hold fast etc. complete all as specified & directed

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters for door, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F Factory made shutter, 35mm thick, 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.

Supply & fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete for door shutters complete all as specified and directed .

Supply & fix in repair for 19mm thick MDF board, best quality laminated both side with decorative choice lamination of any colour and fixed with screws to timber frame work such as in partition, cabinets etc. including 1mm thick lipping complete all as specified and directed.Note-Colour as approved by the GE.

S&F Powder Coating (thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilator/partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 8mm thick Sheet glass, ordinary quality and glazing with oil putty in square for partition/cabin etc. complete all as specified & directed.

S&F in repair 30mm thick 2nd class hardwood Boarding planed both side with butt joints, Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed.

S&F cold rolled steel, nickle coated finished, full-overlay, 35mm dia cup and 11.3mm cup depth, Soft closing spring loaded furniture hinges for cabinets fixed with chromium plated screws complete all as specified and directed. (Make : Topcent CH.3339)

Supply & fix 100mm size aluminium anodized Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 75 mm long stainless steel nickle coated handles fixed with screw to shutter complete all as specified and directed.

M & L preparation of new or previously untreated wooden surfaces of any description , not other wise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

Supply & fix in repair 25 mm dia powder coated mild steel curtain rod including brackets and end knobs, of approved quality, complete all as specified & directed.

Supply & fix 25mm dia fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports etc complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified & directed.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified & directed.

S&F in repair 15 mm bore Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repair 15 mm bore, fancy type, chromium plated, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F 15 mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) including flench complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F PVC (SWR) bends any radius of 110 mm bore dia provided with access door complete all as specified & directed.

S&F PVC (SWR) bends any radius of 75 mm bore dia provided with access door complete all as specified & directed.

M&L for 10mm thick toughend glass rounding/moulding the edge complete all as specified & directed.

Providing and fixing 10mm thickplaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremesh (Fillets, metal frame work and G.I. wire mesh paid separately

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre to

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.Note : WPC shall be measured & paid seperately.

Material and labour for preparation of putty finished new plastered/old surfaces of wall and applying two coats of distempering walls with distemper oil-emulsion white or tinted over a coat of Chalk whiting, preparatory to distempering complete all as specified and directed.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW.

S&F 2nd class hard wood 30mm thick glazed & skeleton shutter for windows, ventilators, etc. of second class hard wood , prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut or mitred beads for securing glass, gauge etc, sizes of members of shutters are provided with stiles and rails as specified in SSR Part-I, section 8, clause 8.24 (b) supplied and fitted in chowkats, complete all as specified & directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/1st class HW beads, in square n exc 0.5 sq. m in each pane complete all as specified & directed.

S & F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for.

M&L Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed CM 1:6 incl dismentaling complete as specified and as directed

S & F 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

S&F solid PVC board 18-20 mm thick for moduler kitchen cabinet/shutter of 100% moisture/anti termite/fire resistant of , of any colour as approved by GE complete all as specified and directed.

S&F Stainless steel Sleek Telescopic drawer slider for drawer suitable size for drawer in kitchen as directed.

S & F in brass mortice lock vertical type of size 100 mm with 4 levers

S & F 40mm dia, brass cupboard knobs fixed with nut, screw and washer

S&F brass tower bolt decorative type 150 mm long extruded section complete all as directed.

M&L for Cutting chases in stone masonry walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc complete all as specified and directed

GM Construction Co.