Development of Salt Production and Research and Development Laboratory Building at Jaipur

Amount

Development of Salt Production and R&D Laboratory Building at Jaipur

Supply, design, fabrication and installation of structural glazing system in the form of fixed panels, using specially designed aluminium extruded section, mullions and transoms having 25 micron anodised of approved colour and shade and ake with ullions fixed on the RCC Beams / columns through adequately designed brackets including providing masking tape on the profiles for safety against external scratches on site complete with approved silicon sealant EPDM gasket etc. Structural to be made glazing air tight and to be as per standards, architectural drawings and specifications. The design to be as per BIS code for required wind pressure IS: 875 part-III and use of aluminium section alloy as per 8147 make of Hindalco, Jindal or Equivalent. System design to strictly consider for thermal movements and structural movements. Using following Section and material as per approved drawing and specification and in direction of Work in charge – Outer Frame Section Code 22738 Size 81.16 X 38.5, Weight 1.294 Kg/Mtr., make by Jindal/Hindalco. (As specified in the Tender/Bidding Documents). Mullion Frame Section Code 22736 Size 81X67, Weight 1.615 Kg/Mtr. Make by Jindal/ Hindalco (As specified in the Tender/Bidding Documents). Transom Frame Section Code 22740 Size 51.88X 27.5 , Weight 0.586 Kg/Mtr. Make by Jindal/Hindalco (As specified in the Tender/Bidding Documents). Saint Gobian Norton V2100 Thermal Bond Section Glazing Spacer Tape. Structure sealant Brand: Dow Corning/WACKER Gasket EPDM Rubber

Supply and fixing of 6 mm toughened glass Reflective Dew Drop ST150 of Saint Gobain make

ACP Work: ACP Sheet 4MM thick coil thick 0.5 MM with 2 inch X 1 inch Aluminium Section thick, 2.5 MM Glazing tape Brand 3MM thik 3MM size 14MM, Weather Sealant Silicone tube Dow Corning/ Maccoy/ Wacker, Regular Colour, SS Fastener & Screw with including Labour Installation and Brand like Alstrong, Euro Alu wonder board, Alex Panel, Timex etc, design and colour as per approved by Architect's. Section details: Code 14036, Size: 50.80 X 25.40 X 1.13, Weight 0.451 Kg/Mtr as per Annexure -4 to this table.

Providing and fixing CNC jali (cage) in 4 mm thick, ACP sheet Coil thick 0.5MM as per design approved.

Providing and fixing 11 Nos. MS pipe fixing vertically in front with fastening screw/Plate of 6 MM thick, size 3"x6"x 12' height with snow white deco finish as per approved Drawing and Design.

Wall Colour Works

Painting of exterior surface of Wall with Apex exterior paint of approved brand and manufacture to give an even shade with two or more coats including preparation of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision.

Finishing walls with Apex Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ) as per approved brand and manufacture and in direction of Work in charge.

Civil Works

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes: in Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Table rubbed polished stone 18mm thick (75x50cm) Granite stone -18mm thick as per approved by Work in Charge.

Providing and fixing 1st quality MAT finished parking tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) and Tile's brand and specifications as per approved by Work in Charge.

Plaster on surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish: 12mm thick.

Gate Works

Providing and fixing of Electrically operated Main sliding gate made up by MS with deco finish with all accessories as per approved drawing and specification and in direction of Work in charge (as per Tender/Bidding Documents).

Painting with deco paint of approved brand and manufacture to give an even shade: two or more coat on gate as per approved drawing and specification and as per direction of Work in charge

Other Work

Providing and fixing of 12 MM toughened Glass in Boundary Wall Size:6' X 6' Approx. Installed on 90 degree L Connector Make by Dorma Code: XLC8006 as per approved drawing and specification and as per direction of Work in charge.

Providing and Fixing of parking tin shade in colour coated sheet with all fasteners and fixing hardware, brands like JSW, TATA or equivalent. MS Pipe frame already done exists) The work will also include painting of MS pipe frame work and labelling of parking designated area as per the direction of work incharge.

Providing and fixing of Building and Company Name with Logo made up of Acrylic Sheet ISI Mark with Light Brand as Samsung Letter Size 18" approx. Logo Size 30" X 30" approx. as per approved design and suggested by the Architect.

Electrical and dismantling work as per actual

Bidder Name

Amount in Words

samridhi associates

CIS GLOBAL INFRATECH PVT LTD

RAJ GLASS ALUMINIUM WORK

CIS GLOBAL INFRATECH PVT LTD

RAJ GLASS ALUMINIUM WORK