GE 861EWS-20/2022-2023

Amount

S&F in repair of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in the ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc. as required having size 32x6mm GI strip, complete all as specified and directed.

S&F in repair of aluminium strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

S&F in repair of air termination, single pointed aluminium rod 12mm dia and 300mm long, including necessary fittings and fixtures, complete all as specified and directed.

S&F in repair of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screws, complete all as specified and directed.

Taking down old unsv fluorescent security/street light and S&F of LED 35 Watt security light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IKO7 complete all as specified and directed. Make Bajaj Cat Part No ENXTP-36LWHCRPLSD or equivalent in Crompton Greaves/ GE/Philips/Havells.

Taking down old unsv fluorescent security/street light and S&F LED 60 Watt security light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IKO7, complete all as specified and directed. Make Bajaj Cat Part No ENXTP-60LWWCRPCSD or equivalent in Crompton Greaves/ GE/Philips/Havells.

Material & labour for earthing complete with galvanised steel earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 25x4mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long copper strip of size 25x4mm with protection pipe of 20mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by -9.0%(Minus) (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

40mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors and roof for fixing of air termination rod, complete all as specified and directed.

VEDA INFRASTRUCTURE

M/s Hilal Constructions

M/S HAMID & CO

M/S AK ENTERPRISES