Development of Various Reservation and Facility plots in MBMC Area. (Basic Facility Development Fund)

Amount

Description

ITEM NO 01 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. SSR 46.09/296

ITEM NO 02 Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR 46.11/296

ITEM NO 03 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. SSR 46.29/297

ITEM NO.04 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR 46.19/297

ITEM NO 05 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) SSR 12.24/86

ITEM NO 06 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 21.02 / 153

ITEM NO 07 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means SSR 21.04 / 153

ITEM NO 08 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 3m to 4.5m) By Mechanical Means SSR 21.04/153 Pg 6/ xix a

ITEM NO 09 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/157

ITEM NO 10 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 157

ITEM NO 11 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m. SSR in Statement C 1 (Page 560)

ITEM NO 12 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. SSR 21.25/156

ITEM NO 13 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 157

ITEM NO 14 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 24.10/176

ITEM NO 15 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchion etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 25.15/178

ITEM NO 16 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal fo R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.35/180

ITEM NO 17 Providing and laying Ready Mix cement concrete M-45 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 25.39/181(RA)

ITEM NO. 18 Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) omplete. (prior approval of superinteding Engineer will be necessary ) SSR no. 26.19/185(RA)

ITEM NO 19 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) SSR 25.54 /181

ITEM NO 20 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.74 / 183

ITEM NO 21 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 188

ITEM NO 22 Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearin plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. complete. SSR 14.06 (Providing, installing & Stressing Tendons for PT Beams)

ITEM NO 23 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR 23.04 /173

ITEM NO 24 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 23.01/173

ITEM NO.25 Providing and fixing double scaffolding system (cup lock type) on The exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. SSR 46.42/299

ITEM NO 26 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) SSR 31.12/206

ITEM NO 27 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with wate proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3 butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) SSR 31.13/207

ITEM NO 28 Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR.31.26/ Pg 208

ITEM NO 29 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 31.04 / 205

ITEM NO 30 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. SSR 31.09/206

ITEM NO 31 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. SSR 31.01/205

ITEM NO 32 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. SSR 32.26/210

ITEM NO 33 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 27.05 / 197

ITEM NO 34 Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR 27.15

ITEM NO 35 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including striking joints, racking out joints watering and scaffolding etc. complete SSR 27.13/198

ITEM NO 36 Providing uncoursed rubble masonry of trap / granit / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. SSR 28.04/199

ITEM NO 37 Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding etc.complete SSR 28.10/146

ITEM NO 38 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR 32.11 / 209

ITEM NO 39 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 32.04 / 209

ITEM NO 40 Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. SSR 32.27/210

ITEM NO 41 Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 32.30/211

ITEM NO 42 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 35.21 / 225

ITEM NO 43 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. SSR 35.23 / 225

ITEM NO 44 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.) SSR 36.21/229

ITEM NO 45 Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 32.32/211

ITRM NO.46 Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete. SSR 32.22

ITEM NO 47 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist SSR 50.79/ 346

ITEM NO 48 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring SSR 33.40 / 217

ITEM NO 49 Providing and laying full body heavy duty, scratch resistant, high abrasion resistant vitrified mirror / glossy/ matt finish tiles for flooring decorative type having size 800 X 800, 1000 X 1000, 800 X 2400 mm (approved size) etc. of 10 to 12 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, approved colour grout, curing and clearing etc. complete. Approved MR

ITEM NO 50 Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 18mm thk. Jaisalmer Stone/ Yellow Marble MCGM R3-CS-FL-28-i

ITEM NO 51 Providing and laying polished natural stone as specified below (Machine cut) of an approved quality and size for paving /flooring in plain and/or diamond /approved pattern including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, machine polishing at site, curing, finishing, etc complete as directed by Engineer In Charge. 18 mm thk. White marble of superior quality and white cement float MCGM R3-CS-FL-01-e

ITEM NO 52 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.06/213

ITEM NO 53 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 33.34/216

ITEM NO 54 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting SSR 33.41 / 217

ITEM NO 55 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. SSR 33.67/220

ITEM NO 56 Providing and laying ceramic tiles having size 30cm.x60cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR 33.27/ 215

ITEM NO 57 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 33.35/216

ITEM NO.58 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish SSR 33.36/216

ITEM NO.59 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 41.78/273

ITEM NO.60 Providing & fixing wood finished Step seating (Pine wood or equivalent- Avg thikness 30 MM), with base of 8 mm thk Marine grade plywood, Wooden flooring to be laid as per pattern and treated properly with sanding, sealer coating, staining & 2 coats of varnish as directed as per detailed drawings. Approved MR

ITEM NO 62 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 39.01 / 245

ITEM NO 63 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary SSR 34.09/224

ITEM NO 64 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR 39.09 / 246

ITEM NO 65 Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR 39.95/263

ITEM NO 66 Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height. Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 One Number Floor spring- 1 One Number 100mm x 100mm safety glass at the specified location SSR 51.64/369

ITEM NO 67 P/F TW frame fully glazed door with shutters with full swing (180degrees) fixed with double spring hinge with fixed glazed portions on top and side of the openable portion. MCGM R3-CS-WW-29

ITEM NO.68 Providing and Fixing Fully Glazed double shutter automatic Door Opening having following features Slim line modern Design Australian Made Designed for new standards Compact modular motor DesignHigh security electric locking No exposed wiring Energy Efficient Electronics Lock 600 VA UPS MCGM R3-CS-WW-28

ITEM NO 69 Providing and fixing Hands Free Aluminum Foot Door Opener as per drawings and specification provided by the engineer in charge including all fitting complete with Coating complete as per specification and drawing provided by the Engineer Incharge. Approved MR

ITEM NO 70 Supply and Installation of GI DOOR FOR DUCT (0.6 X 1.8MT) AND GLASS (0.3 X 1.00MT) with all the necessary hardware complete as per specification and drawing provided by the Engineer Incharge Approved MR

ITEM NO.71 Fire Door 45mm 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. SSR 50.81/347

Providing 60 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). with prior approval of concerned Superitending Engineer.

a) Door Frame: Supplying frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 60 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.

ITEM NO. 72 b)Shutter : Providing of 65mm thick asbestos free composite - 3 criteria - fire, heat and smoke check Accoustic Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128Kilograms/CMT), vermaculite mix faced with 6mm Fire retardant High Density ply, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of In tumescent paint of minimum 200 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping.

ITEM NO.73 c) Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside theshutter structure with 10 mm inside the shutter on all sides with U- glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description

ITEM NO 74 Providing of 2 Hour Rated Acoustic Fire Door to effectively control noise in conference rooms, broadcasting studios, theatres and music practice rooms. duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The accoustic fire doors are tested with NCBN technology ("Non Combustible by Nature") duly tested for sound insulation as per ISO 10140-2 / ASTM E 90 for sound transmission loss evaluation of 42db in reverberation chamber at ARAI. Pg 400

a) Door Frame: Supplying frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 60 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.

ITEM NO. 75 b)Shutter: Supplying & Fixing of 75mm thick asbestos free, fire, heat and smoke resistant composite Acoustic Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x12mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x36 mm with 36mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 6mm Fire retardant High Density fibre ply, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in?tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom and placement of 3 mm thick rubber membrane, at the inside face, sandwitched between calcium silicate board & high density fire retardant ply, without any external lipping with triple rebatting in shutters, etc complete. Providing of Fire Barrier Systems to prevent the spread of fire and smoke within roof and ceiling voids. SSR 51.173/400

ITEM NO 76 Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. SSR 39.59/258

ITEM NO 77 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) SSR 39.25 / 249

ITEM NO 78 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. SSR 33.68/220

ITEM NO 79 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box SSR 39.41 / 253

ITEM NO 80 Providing and fixing in position b) Powder Coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. SSR 39.53B/257

ITEM NO 81 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 39.68 / 259

ITEM NO.82 Providing and fixing of factory made uPVC casement window / Fixed Window & Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below:

S.No. Name of the test Test Method Specified Parameter 1. Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2. Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3. Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4. Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5. Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6. Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7. Surface Spread of flame BS : 476 - Part 7 Classification 1 8. Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9. Tensile modulus ASTM D 638 Shall not be < 35 MPa 10. Shear Modulus ASTM D 732 Shall not be < 220 MPa 11. Tensile Strength EN ISO 527 Shall not be < 30 MPa.

All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. SSR 54.09/517

Casement Window (Big Series) frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm.

Casement Door (Big Series) frame of size 67 x 62 mm & Door Sash of size 67 x 115 mm & Mullion (if required) of size 67 x 78 mm.

Fixed Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm

ITEM NO.83 Providing and fixing of factory made uPVC Louver window (White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below:

S.No. Name of the test Test Method Specifie Parameter 1. Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2. Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3. Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4. Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5. Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6. Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7. Surface Spread of flame BS : 476 - Part 7 Classification 1 8. Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9. Tensile modulus ASTM D 638 Shall not be < 35 MPa 10. Shear Modulus ASTM D 732 Shall not be < 220 MPa 11. Tensile Strength EN ISO 527 Shall not be < 30 MPa

All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4 mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non?uniform discoloration,wrapping and rotting under general use

a.Louver Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm. SSR 54.11/519

ITEM NO.84 Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below:

Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa

All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. SSR 54.08 / 516

2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 mm

3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm

ITEM NO 85 Supply and installation of cubicles of width and depth as perAthena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete. SSR 51.162/395

ITEM NO 86 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 40.01 / 264

ITEM NO.87 Aluminium Fins:- Providing and Fixing Horizontal fins with 3”x1” Aluminium Tubular Section Powder coated Horizontally with 1” facing and 3” Gap in to in in sections with 1”1” Aluminium Angle powder coated fixed at top and bottom for fixing, with Hardware , with labour inclusive. Approved MR

ITEM NO.88 Aluminium Fins:- Providing and Fixing Horizontal fins with 100 mm x 40 mmx 3 mm thick,(Triangle Concave Shape} Aluminum Angle sections powder coated of specification, distance between section will be 3 -4 inches & details as per drawing, Length and with all the accessories,hardwares, with labour all inclusive. Approved MR

ITEM NO.89 ACP Cladding: - Providing,applying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and shade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre) SSR 51.100/378

ITEM NO.90 Providing and laying in position terracotta jali of 80 mm thick decorative type as per specification provided by the engineer in charge and drawings etc complete RA

ITEM NO. 91 Structural Glazing : - Providing & fixing of fabrication and installation of Structural Glazing system in the form of fixed panels, using designed aluminium extruded sections mullions and transoms with cover system section complete having anodize /Powder coating of approved colour and shade and make and fixed on the brick masonry/RCC/structural frames through adequately designed brackets glass shall be fixed to frame with structural silicone sealant/backer rod and weather silicone sealant non streaking /non staining of Dow corning/GE or approved equivalent to make structural glazing air and water tight as per standards. with EPDM gaskets in each section with Saint Gobain make 6 mm reflective toughened glass having SHGC of 0.2 - 0.3, UValue of 3 - 4 W/ sq.mK VLT of 20-40% fixed with glazed panel of Sash frame with T Patti toggle, colour of glass as approval by architect, all aluminium sections joints with aluminium clit angles of 16 gauge, Galvanized M.S. Brackets for frame fixing and all other necessary Hardware fittings Complete as per Drawing and Green Specification. Approved MR

ITEM NO.92 Openable in Glazing:- Providing and Fixing Openable Panel in above itemwith additional 4 Bar Hinges, Handle cum Locking arrangements, With additional aluminium anodized frame for Opneable, and flashing for water dripping. (Including fitting to operate from ground floor). As per specification provided by engineer incharge Approved MR

ITEM NO.93 Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable framing system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer. SSR 50.25/335

ITEM NO.94 Providing & laying ferrocment structure of thickness upto 30 mm by fabricating the mesh reinforcement to the shape and size of the structure, then mortared and then cured inclusive of welding skeletal steel framework, tying mesh reinforcement tightly over it to form cage and impregnating the cage with rich cement mortar, finishing and curing.The stif cement mortar is filled in the mesh layers by pressfill method. The consistency of cement mortar is very thick with very low water cement ratio. The rate is inclusive of all materials, labours required for the structure.(Including shuttering and centering)

ITEM NO.95 Providing & laying ferrocment structure of thickness upto 50 mm by fabricating the mesh reinforcement to the shape and size of the structure, then mortared and then cured inclusive of welding skeletal steel framework, tying mesh reinforcement tightly over it to form cage and impregnating the cage with rich cement mortar, finishing and curing.The stif cement mortar is filled in the mesh layers by pressfill method. The consistency of cement mortar is very thick with very low water cement ratio. The rate is inclusive of all materials, labours required for the structure.(Including shuttering and centering) Approved MR

ITEM NO.96 Casting & fixing Decorative Precast Circular Column,Rectangle Band,Cornice,Window Decorative Sill,Elevational Element Having Precast Shell of thickness 60mm-80m , M25 concrete with approved chemical to have crack free member,including reinforement ,Scaffolding,lifting ,transportation complete Specification provided by the engineer in charge Approved MR

ITEM NO.97 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). SSR 38.04/233

ITEM NO 98 Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete SSR 40.06/264

ITEM NO 99 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete SSR 40.07/264

ITEM NO 100 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) SS4 40.08 /265

ITEM NO. 101 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. SSR 38.51/243

ITEM NO.102 Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. SSR 38.52/243

ITEM NO.103 Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete SSR 38.47/242

ITEM NO. 104 Providing and fixing Designer Fabric ceiling with finish with strings Complete as per Drawings and Spec. As directed by Engineer-In-Charge. Approved MR

ITEM NO. 105 BAFFLE WOOD CEILING Suspended wood baffles with the help of cables upto 6mm/required MS/GI/Aluminium section from the roof having acoustic properties and Elongated various shape baffles made with High Density Board, Solid Wood Durable Coating, Corrosion Resistant, Tamper Proof with approved Finish material Completed as per specification and drawings as per Engineer in charge Approved MR

ITEM NO 106 Providing and fixing Aluminium open cell(150mmx150mm) ceiling 0.45/0.50 mm Galvanized steel and 0.5/0.65mm Aluminium TCT ,Various Gap 50mm to 100mm made of 0.5mm/0.6mm thick black coil coated galvanised steel /powder coated .20mm Wide,40mm deep, 55 microns thick powder coating on exposed surface , 25 microns polyster coil coated over primer on visible surface with primer coat on rear side. Suspension with 4mm dia Galvanized rod ,Height Adjustment Spring STeel big Clip,panel Coupler,GS wall angle. complete as per specification and drawing provided by the Engineer Incharge Approved MR

ITEM NO 107 Providing and fixing Internal signage ss brush finish 2 mm thick . Spec. As directed by Engineer-In-Charge. Approved MR

ITEM NO.108 Providing & Fixing of signage using 304 Stainless steel letters for the front & side fascia and 5mm thick acrylic molded letters, for back fascia moulded letters with height 24 inches, with necessary power supplies for connection, including profile LED back lighting Approved MR

ITEM NO.109 Providing and Fixing laser cut 3-4 mm Acrylic letters of height upto 24 inches with, with all other necessary Hardware for fittings and Labour all Inclusive.including profile LED back lighting .complete Approved MR

ITEM NO.110 Providing and fixing MBMC Logo on entrance gate Approved MR

ITEM NO 111 C.I.Man hole cover 100 kg. SSR 51/532

ITEM NO 112 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. SSR 42.10/274

ITEM NO.113 Providing & fixing in the footpath Combi-Paver having average crushing strength not less than 80 N/mm² as per technical specifications and IS Code 15658:2006; shot blasted 60mm thick in approved texture and colour and combination size 100 x 200, 125 x 200, 175 x 200, 225 x 200, 275 x 200 to be fixed on average compacted thickness 25 mm well graded sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as specified and as directed by the Engineer. NOTE: THIS ITEM SHOULD BE OPRATED ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.) or Equivalent. Approved MR

ITEM NO.114 Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm.

Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solidsclear sealer @ 150 to 250 gms per sqm using surface roller and protecting from fallingdust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary ) SSR 54.01 / 513

ITEM NO.115 Providing and laying RED & BLACK GRANITE cobble stones of 100mm x 100mm x 100mm, 3 line dressing with 12 mm top layer in size of fine cut and well dressed in Grey colour in paving on a bed of min. 40 mm thick cushioning in C.M. 1:4 including neat cement float etc. filling of joints in C.M. 1:2 with grey cement to match the colour of cobble stone in the required pattern, design and as directed by the Engineer incharge, including cleaning, curing etc. complete. MCGM R3-RW-3-37

ITEM NO.116 GRASS JOINT PAVING: Providing and laying machine cut machine polished kota stone flooring for Grass joint paving, 25mm to 30mm thick required width in plain pattern on bed of 1:6 C. M. including cement float, curing, polishing and cleaning including removing unwanted stuff as directed. Excavation for Planting of Lawn Digging of Soft surface up to 30 Cm. as per drawing and specification provided by Engineer In-charge. Approved MR

ITEM NO.117 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete SSR 33.52/218

ITEM NO. 118 Providing and fixing Speed Breakers of Size 350 W x 500 L x 50 H mm yellow black color as shown in the drawing with necessary fittings & fixtures as directed by EIC. MCGM R3-CS-RM-132

ITEM NO.119 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per Square Metre area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete. SSR 6.12A/48

ITEM NO.120 Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant SSR 7.05/69

ITEM NO.121 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge SSR 23.09/ 174

ITEM NO.122 Providing and Fixing Decorative / Ornamental grills as per design for compound wall Fencing including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc. complete as directed. MCGM R3-CS-SL-13

ITEM NO.123 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR 46.39/298

ITEM NO 124 Providing and installing Nylon net for protection from Birds entry in Entrance Lobby. MCGM R3-CS-RM-133

ITEM NO.125 Double Side Pvc Coated waterproof And Sunshed Tensile Fabric Tensile Roofing including strings and fabrication Specification as per engineer in charge and drawing. Complete with fitings Approved MR

ITEM NO. 126 Circular tree guard : Providing, fabrication and fixing M.S. Circular tree guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm Dia Horizontal support 18mm Dia. intermediate support with M.S. cap- (type-I) logo panel etc. including cutting welding, riveting, oil painting with navy blue colour or any other approved colour shade as directed and fixing in cement concrete foundation including cement concrete paver block lining including removal of surplus material/debris and restoring damaged portion of footpath etc. as directed.(Design details vide Drg.No.4F-A1.1, 4FA1.2, A1.3 in the catalogue of street Furniture (Vol.I) published by B.M.C.) MCGM R3-RT-16-28

ITEM NO.127 Square tree guard : Providing, fabrication and fixing M.S. Square tree guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm Dia circular horizontal support, 18mm Dia circular intermediate support with M.S. cap-(type-I) logo panel etc including cutting welding, riveting, oil painting with navy blue colour any other approved colour shade as directed and fixing in cement concrete foundation including cement concrete paver block lining including removal of surplus material/debris and restoring damaged portion of footpath etc. as directed. (Design details vide Drg.No.4F-C1 in the catalogue of street Furniture (Vol.I) published by B.M.C) work complete as per specifications and as directed by the Engineer. MCGM R3-RT-16-30

ITEM NO.128 Providing and laying Natural unpolished mixed colour Pebbles of size 5mm to 20mm laying in 3 layers (finish layer of 75mm nominal thickness), graded pebbles etc complete as per drawing as specified as directed by Engineer. (Refer sketch 24) MCGM GW-3-1-e

ITEM NO.129 Providing and fixing thematic murals created in mix media in different shape and size as per required artwork made out of 8mm, 12mm and 19mm thick marine plywood and BTC wood and fibre coating in imported silicon rubber painted MCGM CE4-09-002- FA141C

ITEM NO.130 Artist painting of wall in 3 D format and text format MCGM FAIR-3D-AWP-A

ITEM NO.131 P/F MURAL MADE IN FIBRE RAINFORCED PLASTIC AS PER GIVEN ART WORK OF REQUIRED SIZES MCGM CE4-07-076-FF-47A

ITEM NO.132 MURAL IN PAINT (3D) MCGM CE5-10-024- FAIR1

PLUMBING

SANITARY FIXTURES

ITEM NO.133 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 43.19

ITEM NO.134 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. SSR 42.33

ITEM NO.135 Providing and fixing C.P.Two way BIB cock jaquar continental including necessary sockets/union nut etc. complete. SSR 42.80

ITEM NO.136 Providing and fixing 15 mm diameter PVC Aqua kraft type super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete SSR 43.39

ITEM NO.137 Providing and fixing C.P. BIB cock with wall flange continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. (SHOWER) SSR 42.83

ITEM NO.138 Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. (KITCHEN SINK) SSR 42.82

ITEM NO.139 Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. SSR 48.35

ITEM NO.140 Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. SSR 41.69

ITEM NO.141 Providing and fixing C.P. Angular stop cock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. SSR 42.79

ITEM NO.142 Providing and fixing earthenware lipped flat back/corner type Urinal of Hindustan /Perryware / Neycer / Cera or equivalant make with PVC 5 liters flushing system of 5 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face ofwall. SSR 41.61

ITEM NO.143 Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 48.31

ITEM NO.144 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. SSR 42.67

ITEM NO.145 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. SSR 42.81

ITEM NO.146 Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litres 2000 Litres SSR 42.54

ITEM NO. 147 Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. SSR 51.89

INTERNAL WATER SUPPLY SYSTEM

ITEM NO.148 Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15mm dia. SSR 42.55

c) 20mm dia. SSR 42.56

d) 25mm dia. SSR 42.57

f) 32mm dia SSR 42.58

g) 40mm dia. SSR 42.59

h) 50mm dia. SSR 42.60

ITEM NO.149 Supplying and erecting GI pipe 50 mm dia. ‘B ’class at position with accessories complete as per specification no. CW-PLB/GP. CSR 16-5-6

ITEM NO.150 Supplying and erecting Gipipe 65 mm dia. ‘B’class at position with accessories complete as per specification no. CW-PLB/GP. CSR 16-5-7

ITEM NO.151 Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-31

ITEM NO.152 Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-32

ITEM NO.153 Supplying and erecting 32/40 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-33

ITEM NO.154 Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV CSR 13-7-34

ITEM NO.155 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV CSR 13-8-13

ITEM NO.156 Providing and making ISI Mark ferrule connection of 32 mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. SSR 42.75

ITEM NO.157 Providing and fixing 50mm diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] SSR 41.30

SOIL, WASTE, VENT & RAIN WATER PIPES

ITEM NO.158 Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.93

ITEM NO.159 Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. SSR 42.94

ITEM NO.160 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.27

ITEM NO.161 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.28

ITEM NO.162 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) SSR PAGE NO.535 SR.NO.192

ITEM NO.163 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. ( KHURRA) SSR 42.67

ITEM NO.164 R.C.C.pipe Np2 class 225mm dia. 2m long SSR PAGE NO.541 SR.NO.854

ITEM NO.165 R.C.C.pipe Np2 class 300mm dia. 2m long SSR PAGE NO.541 SR.NO.855

ITEM NO.166 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. SSR 42.02

ITEM NO.167 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete. SSR 42.11

ITEM NO.168 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc. complete. SSR 42.16

ITEM NO.169 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. SSR 50.85

ITEM NO.170 Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C.supply of 3.75 kW /5 HP with discharge 420/120 lpm for head of 18/51 m & 65 mm suction/50 mm delivery pipe on provided CC foundation as pespecification no. WP-CGP. CSR 12-1-8

DOMESTIC PUMP FLOW RATE- 170 LPM (1 working + 1 standby)

HEAD- 45 M

ITEM NO.171 Supplying, erecting, testing and commissioning of minimum three & above starrated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C.supply of 2.25 kW/3 HP with discharge 720/165 lpm for head of 12/26 m & 65 mm suction/50 mm delivery pipe on provided CC foundation as pespecification no. WP-CGP. CSR 12-1-6

FLUSHING PUMP FLOW RATE- 120 LPM (1 working + 1 standby)

HEAD- 45 M

ITEM NO. 172 Pump Room Sump Pump: Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pumpset of 0.75 kW/1 HP with 230 V, single phase, 50 Hz, A.C. supply suitable for 100 mm dia. borewell with 10 to 60 lpm discharge at 88 to 33 m head & discharge & delivery pipe of size-32 mm dia. with a necessary H type clamps as per specification no. WP-SMP. CSR 12-2-33

SUMP PUMP FLOW RATE- 60 LPM (1 working + 1 standby)

HEAD- 20 M

ITEM NO.173 Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 230 V, single phase, 50 Hz, A.C. supply of 1.125 kW/1.5HP with discharge 198/50 lpm for head of 15/37.5 m & 40 mm suction/32 mm delivery pipe on provided CC foundation as per specification no. WP-CGP.( BOOSTER PUMP) CSR 12-1-3

ITEM NO.174 Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV CSR 13-7-23

ITEM NO.175 Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS CSR 13-7-5

ITEM NO.176 Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS CSR 13-7-7

ITEM NO.177 Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF VL/BFV CSR 13-7-19

ITEM NO.178 Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-18

ITEM NO.179 Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-17

ITEM NO.180 Supplying and erecting 100 mm dia. Pressure gauge, 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. Pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG CSR 13-8-14

ITEM NO.181 Supplying, erecting, testing and commissioning of water level controller 230/415 V, A.C. supply , four way under ground & over head tank operation only. CSR 12-4-15

PLUMBING PANEL

Incomer

ITEM NO.182 Providing & erecting 4 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB CSR 5-5-1

Bus bar with enclosure with all control accessories of 100A Motor control center for fully functioning as Plumbing pump panel with in 1W+1S configuriation..

ITEM NO.184 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-7-5

ITEM NO.185 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB CSR 6-2-11

ITEM NO.186 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. For manufacturing of panel, CRCA sheet of min 1.6 mm to 1.8 mm thickness shall be used for external enclosure and min 1.2 to 1.4 mm thickness for internal separation and min 2 mm to 2.4 mm thickness shall be used for cable entry / gland plate . CSR 6-1-1

ITEM NO.187 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.188 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-7-2

ITEM NO.189 Supplying, erecting, testing and commissioning of automatic control panel for three phase , 415 V, A.C. supply, submersible/centrifugal pump set upto 7.5 HP consisting of D.O.L. starter having relay range 9-14 A, S.P.P., combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc CSR 12-4-17

ITEM NO.190 Supplying, erecting, testing and commissioning of automatic control panel for single phase, 230 V, A.C. supply submersible/centrifugal pump set upto 3 HP consisting of D.O.L. starter of suitable relay range, S.P.P., combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection. CSR 12-4-20

ITEM NO.191 Supplying, erecting & marking DP MCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-9

ITEM NO.192 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-14

ITEM NO.193 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-15

ITEM NO.194 Supplying & erecting single compression type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm cable as per specification No. CB-GL CSR 7-7-1

ITEM NO.195 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No. CB-CL/CU CSR 7-9-1

ELECTRICAL

ELECTRICAL PANEL

ITEM NO.196 Providing & erecting 4 Pole MCCB, 415V,630A, rated short-circuit breaking capacity 50 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB (CURRENT SETTING AT 500A) CSR 5-5-7

ITEM NO.197 Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB CSR 5-5-3

ITEM NO.198 Providing & erecting 3 Pole MCCB 415V, 320A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB should have phase barriers both sides, with insulation withstand capacity 800V,no line-load bias in provided enclosure/panel as per specification no. SW-MCCB CSR 5-5-5

ITEM NO.199 Providing & erecting 4 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB CSR 5-5-1

ITEM NO.200 Providing & erecting 3 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB CSR 5-5-2

ITEM NO.201 Supplying and erecting intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware CSR 6-5-9

ITEM NO.203 Supplying, erecting & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD CSR 6-8-3

ITEM NO.204 Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RS232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh,V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. CSR 6-5-13

ITEM NO.205 Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB. CSR 5-3-13

ITEM NO.206 Supplying & erecting ON LOAD change over switch 4 Pole, 415V, 160A, open execution having staggered termination, phase barrier, shroud termination and terminalcover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3 as per specification no.SW-SWR/COS. CSR 5-1-5

ITEM NO. 207 Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-12

ITEM NO. 208 Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-3

ITEM NO. 209 Supplying, erecting & marking SP MCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-5

ITEM NO. 210 Supplying, erecting & marking DP MCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-7

ITEM NO. 211 Supplying, erecting & marking DP MCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-9

ITEM NO. 212 Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-10

ITEM NO. 213 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. CSR 5-6-4

ITEM NO.214 Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCB CSR 5-5-6

ITEM NO.215 Supplying, erecting, testing & commisioning 125 kVAr, 3 phase, 50 Hz., APFC Panel with derated power contactor of suitable rating for capacitor switching Application for each step controlled by microprocessor based APFC relay consisting of 2,3,5,10,20,20,20,20 or suitable steps of MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with detuned aluminium wound reactor of 7/ 14% for each step, APFC Panel shall suitable rating MCCB as incomer and each branch/step shall have separate isolation with MCCB/MCB of Suitable rating for protection, compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP-ED/APFC CSR 6-9-20

ITEM NO.216 Supplying, erecting, testing & commisioning 35 kVAr, 3 phase, 50 Hz., APFC Panel with derated power contactor of suitable rating for capacitor switching Application for each step controlled by microprocessor based APFC relay consisting of 2,3,5,5,10,10 or suitable steps of MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with detuned aluminium wound reactor of 7/ 14% for each step, APFC Panel shall suitable rating MCCB as incomer and each branch/step shall have separate isolation with MCCB/MCB of Suitable rating for protection, compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP-ED/APFC. CSR 6-9-17

ITEM NO.217 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-7-5

ITEM NO.218 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.219 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-7-2

ITEM NO.220 Supplying, erecting, testing & commisioning of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & current density 0.8 A per sq mm with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. CP-BB CSR 6-2-11

ITEM NO.221 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. For manufacturing of panel, CRCA sheet of min 1.6 mm to 1.8 mm thickness shall be used for external enclosure and min 1.2 to 1.4 mm thickness for internal separation and min 2 mm to 2.4 mm thickness shall be used for cable entry / gland plate . CSR 6-1-1

ITEM NO.222 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/GI frame. CSR 5-4-15

ITEM NO.223 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB CSR 5-4-9

ITEM NO.224 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB CSR 5-4-10

ITEM NO.225 Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO. CSR 5-6-9

ITEM NO.226 Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12ways/phase (36 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB CSR 5-4-3

ITEM NO.227 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB CSR 5-4-4.

ITEM NO.228 Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB CSR 5-4-2

ITEM NO.229 Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB CSR 5-4-1.

ITEM NO.230 SSupplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per Specification no. SW-MCBDB CSR 5-4-8.

ITEM NO.231 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO. CSR 5-6-13

ITEM NO.232 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways/36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB CSR 5-4-6

ITEM NO.233 Supplying, erecting & marking DP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB CSR 5-3-7

ITEM NO.235 Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. CSR 1-1-7

ITEM NO.236 Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. CSR 1-1-8

ITEM NO.237 Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. CSR 1-1-9

ITEM NO.238 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification WG-MA/CC. CSR 1-1-10

ITEM NO.239 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. CSR 1-1-12

ITEM NO.240 Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall/floor with chiselling as per specification no. WG-MA/CON. CSR 1-1-11

ITEM NO.241 Supplying and erecting 25mm dia. corrugated flexible polypropylene conduit CSR 1-2-2

ITEM NO.242 Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW CSR 1-3-1

ITEM NO.243 Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW(GREEN COLOUR EARTH WIRE) CSR 1-3-1

ITEM NO.244 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW CSR 1-3-2

ITEM NO.245 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW (GREEN COLOUR EARTH WIRE) CSR 1-3-2

ITEM NO.246 Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW 9 CSR 1-3-3

ITEM NO.247 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-1

ITEM NO.248 Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-2

ITEM NO.249 Supplying and erecting modular type switch one way 16/20 A on provided plate and box with wiring connections complete with neon indicator. CSR 1-6-7

ITEM NO.250 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-10

ITEM NO.251 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-11

ITEM NO.252 Supplying and erecting modular type 6/16A fuse unit on provided plate and box with wiring connections complete. CSR 1-6-13

ITEM NO.253 Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete CSR 1-6-14

ITEM NO.254 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-34

ITEM NO.255 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-35

ITEM NO.256 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-36

ITEM NO.257 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-38

ITEM NO.258 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-40

ITEM NO.259 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-6-41

ITEM NO.260 Supplying and erecting ceiling rose/ batten holder/ slanting holder/ hanging cord switch/ hanging bell push/ pendant holder bakelite base 6A erected on filled polypropylene board or polished double wooden block/ PVC junction box. CSR 1-5-5

ITEM NO.261 Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-15

ITEM NO.262 Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-6-17

ITEM NO.263 Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. CSR 1-6-24

ITEM NO.264 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.. CSR 1-6-29

ITEM NO.265 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-16

ITEM NO.266 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-31

ITEM NO.267 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-32

ITEM NO.268 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-33

ITEM NO.269 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-34

ITEM NO.270 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-35

ITEM NO.271 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-17

ITEM NO.272 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Wire Armoured) CSR 7-1-30

ITEM NO.273 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Wire Armoured) CSR 7-1-12

ITEM NO.274 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Wire Armoured) CSR 7-1-19

ITEM NO.275 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-22

ITEM NO.276 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-21

ITEM NO.277 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-20

ITEM NO.278 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-18

ITEM NO.279 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-21

ITEM NO.280 Supplying & erecting single compression type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm cable as per specification No. CB-GL CSR 7-7-1

ITEM NO.281 Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm cable as per specification No. CB-GL CSR 7-7-2

ITEM NO.282 Supplying & erecting single compression type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm cable as per specification No. CB-GL CSR 7-7-3

ITEM NO.283 Supplying & erecting single compression type brass cable glands for 4 core 35 Sq.mm./3 core 50 Sq.mm. cable as per specification no. CB-GL CSR 7-7-4

ITEM NO.284 Supplying & erecting single compression type brass cable glands for 3½ core 95 sq mm cable as per specification No. CB-GL CSR 7-7-7

ITEM NO.285 Supplying & erecting single compression type brass cable glands for 3½ core 120 sq mm cable as per specification No. CB-GL CSR 7-7-8

ITEM NO.286 Supplying & erecting single compression type brass cable glands for 3½ core 150 sq mm cable as per specification No. CB-GL CSR 7-7-9

ITEM NO.287 Supplying & erecting single compression type brass cable glands for 3½ core 185 sq mm cable as per specification No. CB-GL CSR 7-7-10

ITEM NO.288 Supplying & erecting single compression type brass cable glands for 3½ core 70 sq mm cable as per specification No. CB-GL CSR 7-7-6

ITEM NO.289 Supplying & erecting crimping type copper lugs for cable 50 sq mm complete as per specification No. CB-CL/CU CSR 7-10-4

ITEM NO.290 Supplying & erecting crimping type copper lugs for cable 70 sq mm complete as per specification No. CB-CL/CU CSR 7-10-5

ITEM NO.291 Supplying & erecting crimping type aluminium lugs for cable 95 sq mm complete as per specification No. CB-CL/AL CSR 7-10-6

ITEM NO.292 Supplying & erecting crimping type aluminium lugs for cable 120 sq mm complete as per specification No. CB-CL/AL CSR 7-10-7

ITEM NO.293 Supplying & erecting crimping type aluminium lugs for cable 150 sq mm complete as per specification No. CB-CL/AL CSR 7-10-8

ITEM NO.294 Supplying & erecting crimping type aluminium lugs for cable185 sq mm complete as per specification No. CB-CL/AL CSR 7-10-9

ITEM NO.295 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No. CB-CL/CU CSR 7-9-1

ITEM NO.296 Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF CSR 9-1-5

ITEM NO.297 Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP. CSR 9-2-3

ITEM NO.298 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete CSR 7-6-12

ITEM NO.299 Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete(8 SWG) CSR 9-2-5

ITEM NO.300 Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 universal extensions compliant to IEC 61000, EN 60950, CISPR 22, IS:9000 part 2/section 4 having LAN/WAN Port, USB port, RS232 port as per specification complete as per specification no. WG-TA CSR 19-2-25

ITEM NO.301 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 17.4 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 230 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG CSR 11-1-12

ITEM NO.302 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 82.5 kVA upto 100 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF. CSR 11-2-10

ITEM NO. 303 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 40 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 7.47 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 75 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG CSR 11-1-8

ITEM NO. 304 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 40 kVA upto 50 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF. CSR 11-2-7

ITEM NO.305 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 100 mm height with required standard accessories CSR 7-11-3

ITEM NO.306 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. CSR 7-11-8

ITEM NO.307 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware CSR 7-11-7

ITEM NO.308 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware CSR 7-11-6

ITEM NO. 309 Supplying, erecting, testing & commissioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS(Without batteries) CSR 3-7-7

ITEM NO.310 Supplying and erecting 12 V/42Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete CSR 3-8-10

ITEM NO.311 Supplying and erecting 12 V/100Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete. CSR 3-8-12

ITEM NO.312 Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries) CSR 3-7-3

ITEM NO.313 Supplying and erecting 12 V/V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete CSR 3-8-11

ITEM NO.314 Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FGODF/ SL. CSR 2-3-2

ITEM NO.315 Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC. CSR 2-6-1

ITEM NO. 316 Providing & erecting 4 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL CSR 8-2-10

ITEM NO. 317 Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-18

ITEM NO.318 Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL. CSR 2-3-20

ITEM NO.319 Supplying and erecting LED square / circular Max. 11 W (9W) down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-3

ITEM NO.320 Supplying LED concealed type foot / step light with aluminium body for indoor / outdoor application suitable for 4W - 6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with minimum 1 year warranty as per specification No. FG-IDF/LED. CSR 2-1-12

ITEM NO.321 Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) for toilet area Indirect lighting Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-16

ITEM NO.322 Supplying and erecting LED square / circular Max. 25 W down lighter / panelLight having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-6

ITEM NO.323 Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED CSR 2-1-5

ITEM NO.324 Supplying and erecting integrated LED Highbay Fitting 70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/LED. CSR 2-5-1

ITEM NO 325 Light fixtures complete with: a) All fixing accessories, mounting Brackets etc. necessary for completeness of installation. b) Lamp of specified wattage c) Electronic ballast of sutable capacity as per specification R3-ME-4-4 Industrial Flood light Symmetrical, Integral type luminaire with 250W metal halide lamp with control gear and filament as per specification MCGM R3-ME-4-4-a

ITEM NO 326 Supplying and erecting Uplighter Wall lights (OWL 402) Wall lights led:- 18w/ 40w with high transitivity diffuser :-Clear/Frosted Toughened Glass, CCT upto 3000K/4000k/6000k, Hosing: Aluminium, IP65, Durable and Vandal resistant complete with all fixtures As per Drawing and Specification. Approved MR

ITEM NO 327 Supplying and erecting Uplighter Wall lights (OWL 406) Wall lights led:- 2X18w/ 2X40w with high transitivity diffuser :-Clear/Frosted Toughened Glass, CCT upto 3000K/4000k/6000k, Hosing: Aluminium, IP65, Durable and Vandal resistant complete with all fixtures As per Drawing and Specification. Approved MR

ITEM NO 328 Supplying and erecting led profile light 12 w conforming IP 65 of any colour with driver complete. (Including Casing ) Spec. As directed by Engineer-In-Charge. and Drawing Approved MR

ITEM NO 329 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. CSR 2-1-8

ITEM NO.330 Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. CSR 2-9-11

ITEM NO.331 Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF. CSR-2-9-2 /Pg 25

ITEM NO.332 Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1050 mm CSR 2-10-9/Pg 27

ITEM NO.333 Supplying and erecting regular/ standard model ceiling fan of 1400 mm. sweep complete erected in position as per specification no. FG-FN/CF. CSR 2-9-3

ITEM NO.334 Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. CSR 2-10-4

ITEM NO.335 Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. CSR 2-10-6

ITEM NO.336 Supply,Installation, testing & commissioning of following light fixtures complete with: a) All fixing accessories, mounting Brackets, anchor fasteners, suspension wires/chains etc. necessary for completeness of installation. b) Drivers / Controllers with housing. c) Lamp of specified wattage. d) Earthing of fittings. e) Diffuser shall lit up uniformly without any black spot on diffuser. f) Light fixture finishes should be as specified. g) Any visible power supply cable to light fixture shall be transperent. h) All suspended fixtures shall be provided with SS caps to put around suspension at flase ceiling level Note: 1) In addition to above mentioned accessories details, vendor to consider specific light fixture requirement mentioned along-with light fixture. 2) Light Fixtures final confirmation to be done by Architect and Lighting Consultant: approved MR

45 W LED DOWN LIGHT FITTING SURFACE MOUNTED / SUSPENSION MOUNTED

15 W TRACK LIGHT WITH COB LED & EXTRUDED ALUMINIUM HOUSING

SINGLE PHASE 1 MTR. TRACK FOR TRACK LIGHTS

LED DECORATIVE HANGING LIGHT FITTINGS

RGB FLOOR STRIP LIGHTS OF 300 mm. LENGTH WITH CONTROLLER

5 W LED STUDY TABLE LAMP

ITEM NO 337 Supplying and erecting (OTSL 1251)Track LED fitting 10W/15w with high transitivity diffuser :-Miky/clear PMMA lumen/W, CRI>80, CCT upto3000K/4000k/6000k, Hosing: Die cast Aluminium, IP20, Approved MR

ITEM NO 338 Supplying and erecting (OTSL 1252)Track LED fitting 24W/30w/50w with high transitivity diffuser :-Miky/clear PMMA lumen/W, CRI>80, CCT upto3000K/4000k/6000k, Hosing: Die cast Aluminium, IP20, Approved MR

ITEM NO 339 Supplying and erecting (OSDL 1055)SPOT LED fitting 5W/10w/15w with high transitivity diffuser :-Clear lumen/W, CRI>80, CCT upto 3000K/4000k/6000k, Hosing: Spun Aluminium, IP40, Approved MR

ITEM NO 340 Supplying and erecting (OSDL 1057)SPOT LED fitting 20w/30w with high transitivity diffuser :-Clear lumen/W, CRI>80, CCT upto 3000K/4000k/6000k, Hosing: Spun Aluminium, IP40, Approved MR

ITEM NO 341 Supplying and erecting Magnetic Surface Track Channels (size 32mm x 50mm)with available material in Aluminium,Black color,Magnetic Design Approved MR

ITEM NO 342 Supplying and erecting Uplighter Wall lights (OWL 402) Wall lights led:- 18w/ 40w with high transitivity diffuser :-Clear/Frosted Toughened Glass, CCT upto 3000K/4000k/6000k, Hosing: Aluminium, IP65, Durable and Vandal resistant Approved MR

ITEM NO 343 Supplying and erecting (OUL 354)Underwater light fitting 8w/12w/16w with diffuser :-clear/frosted toughened glass , CCT upto3000K/4000k/6000k, Hosing: gun metal/stainless steel, IP68, durable and vandal resistant Approved MR

ITEM NO 344 Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary as per specification No. FG-LP/RET. CSR 2-8-14

ITEM NO.345 Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification noFF-AFAS/CP. CSR 13-10-2

ITEM NO.346 Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bicolour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FFAFAS/ SD. CSR 13-10-5

ITEM NO.347 Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with 0°C to 58°C temperature range, with base as required, single/twin LED’s with 360 degree view, in-built locking mechanism to check the removal and pilferage of the detector, Detector Shall conforming to IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FF-AFAS/HD - ROR. CSR 13-10-6

ITEM NO.348 Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs etc., Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FFAFAS/ CRM-FCM CSR 13-10-10

ITEM NO.349 Supplying, installing, testing and commissioning of addressable fire monitor module for flow switches, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MM CSR 13-10-11

ITEM NO.350 Supplying, installing, testing and commissioning of addressable fire isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. module complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, FF-AFAS/ISM CSR 13-10-12

ITEM NO.351 Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP. CSR 13-10-13

ITEM NO.352 Supplying, installing, testing and commissioning of Addressable Sounder cum Strobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum 75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189: 2008, IS 15908:2021 / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST CSR 13-10-14

ITEM NO.353 Supply, Installation,Testing & Commissioning of Response indicator for all detectors located above false ceiling. Complete as required Approved MR

ITEM NO.354 Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, minimum 10" LCD or LED display with resistive touch screen or function keys and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels or minimum 80 characters backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel shall conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL with 3 years replacement warranty FF-AFAS/RP. (Compatible with 1/2 Loop Fire Alarm Control Panel), as per specification no FF-AFAS/RP CSR 13-10-16

ITEM NO.355 Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU CSR 13-9-9

ITEM NO.356 Supplying Installing, testing and commissioning of PA Gooseneck Microphone with Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence,sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of 585mm(23") long, felxible stem gooseneck condenser microphone & Heavy Duty Metal Base having on/off switch, LED indication and Suitable for 48V phantom supply as per specification no. PA-GM CSR 19-7-6

ITEM NO.357 Supplying, erecting, testing and commissioning of 2 core 2.5 sqmm copper conductor shielded microphone cable complete as per specification no. PASMC CSR 19-7-28

ITEM NO.358 Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.3 CSR 1-1-1

ITEM NO.361 Supplying,installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FMCS (5W tap consideration) CSR 19-7-14

ITEM NO.362 Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR CSR 19-7-25

ITEM NO.363 Supplying & erecting of High definition 2 Megapixel IP IR Bullet Camera with following features : Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. CSR 19-6-1

Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) .Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM.

ITEM NO.364 Supplying & erecting of High definition 2 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°.Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. CSR 19-6-3

Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM.

ITEM NO.365 Supplying, installing, testing & commissioning of 32/40 Ch. Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI/VGA outputs, provided HDMI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specification no. CCTV-NVR CSR 19-6-15

ITEM NO.366 Supplying, installing, testing & commissioning of 64/80 Ch Network Video Recorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 Megapixel Resolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920 × 1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive Ethernet interface, support multi brand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specificationss no. CCTV-NVR CSR 19-6-17

ITEM NO.367 Supplying, erecting & terminating 10 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. CSR 19-1-23

ITEM NO.368 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD CSR 19-6-21

ITEM NO.369 Supplying & erecting 32" professional LED Monitor with 1920*1080 (Full B452HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON CSR 19-6-23

ITEM NO.370 Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP CSR 19-5-4

ITEM NO.371 Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU CSR 19-5-6

ITEM NO.372 Supplying and fixing power distribution unit for networking rack comprises of 6/16A (6 Nos. sockets), 16A modular MCB, appropriate rating, enclosed in black powder coated metal with necessary arrangement for fixing complete. CSR 19-5-17

ITEM NO.373 Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480 mm) as per specification no. WG-NAS/RAK CSR 19-5-19

ITEM NO.374 Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x550x747 mm) as per specification no. WG-NAS/RAK CSR 19-5-21

ITEM NO.375 Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC CSR 19-3-1

ITEM NO.376 Supplying and fixing 1 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of Cat 6 type, compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC CSR 19-3-16

ITEM NO.377 Supplying and erecting 12 fibers LSZH armoured multimode optical fiber cable with , core dia 50/125 μm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC CSR 19-3-11

ITEM NO.378 Supplying and fixing SC/SC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification no. WG-NAS/LIU2 CSR 19-5-13

ITEM NO.379 Supplying, fixing, and configuring 24-port 10/100M un-managed 10/100/1000 base-T gigabit switch compliant with IEEE 802.3 standards as per specification complete. CSR 19-4-16

ITEM NO.380 Supplying, fixing, and configuring 48 ports PoE managed gigabit switch 10/100/1000 Mbps + 4SFP+ ports & 2X10G RJ-45 ports compliant with IEEE 802.3 af/at standards, PoE budget 370W & supports OSPF/policy based routing/stacking erected in provided rack complete. CSR 19-4-18

ITEM NO.381 Supplying and fixing of self expanding, ready to use polyurethane(PU) foam sealant of minimum 750ml bottle, suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles (except hollow core conductors). Sealant shall have minimum 2 hour fire rating , conforming to EN 1366-4:2021 as per specification no FF-FRS. CSR 13-12-1

ITEM NO.382 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB CSR 5-6-1

ITEM NO.383 Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity w CSR 5-6-2

ITEM NO.384 Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity w CSR 5-6-3

ITEM NO 385 Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-3

ITEM NO 386 Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-5

ITEM NO 387 Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system out door unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-9

ITEM NO 388 AIR HANDLING UNITS / TREATED FRESH AIR HANDLING UNITS: Supply ,Installation ,Testing and commissioning of Double Skin (Panel Thickness of 40mm+/-2mm) with thermal break profile AHU complete with casing of hot dip G.I Casing of thickness of 0.6 mm pre -coated and pre -plastisised G.I for outer skin and 0.6 mm plain & G.I for Inner Skin encasing with 40mm polyurethane foam insulation having a density of 40 Kg. / CuM factory injected between them by injection moulding machine with thermal break profile recirculating Air Handling Unit. AHU should be Floor Mounted / Ceiling suspended type with 1 /2 backward curved DIDW /plug fans ,with single stage filtration banks of MERV 8, 6/8 row deep DX coil, SS 304 insulated drain pan.The unit includes suitable ( EFF-1) TEFC motor with IP52 protection, suitable for 415 +/- 10 % volt , 50 ±5% cycle , combined power supply variation of ±10%, 3 Phase AC supply , vibration isolators,Rubber pads(min 1 inch thick), canvas connection ,bulk head light,door limit switches, as per specification/datasheet. AHUs shall be fitted with GI VCD's (Volume Control Damper) for supply/return/fresh air / purge air opening of AHU body with canvass connection. All supporting GI hangers, MS angles, channels nut , bolts, washers etc. necessary for unit installation,starter panel as mentioned below shall be inclusive in the cost. Vendor to consider the suitable size of FRLS power cable from panel to unit in scope of supply. All AHUs shall be suitable for Static Pressure as mentioned below. ESP mentioned in BOQ is indicative. However contractor to calculate ESP before bidding and quote accordingly. All AHU Shall equipped with AHU Expansion valve kits suitable to function with VRF system.

Main Arena AHU -20 TR / 6500 CFM / ESP 40MM Approved MR

ITEM NO 389 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-22

ITEM NO 390 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-21

ITEM NO 391 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-19

ITEM NO 392 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. CSR 3-11-15

ITEM NO 393 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for costal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. CSR 3-11-14

ITEM NO 394 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-89

ITEM NO 395 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-90

ITEM NO 396 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-91

ITEM NO 397 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiation with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-92

ITEM NO 398 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-93

ITEM NO 399 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete CSR 3-11-94

ITEM NO 400 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-95

ITEM NO 401 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-96

ITEM NO 402 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-97

ITEM NO 403 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnut complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. CSR 3-11-86

ITEM NO 404 Providing and fixing on walls/ ceiling/ floor 50mm dia.CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. SSR 42.60

ITEM NO 405 Providing and fixing on walls /ceiling/ floor 40mm dia.CPVC pipe with necessary fittings,remaking good the demolished portion etc. complete. Pipeline if necessar yand conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.59

ITEM NO 406 Providing and fixing on walls/ ceiling/ floor 32mm dia.CPVC pipe with necessary fittings,remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.58

ITEM NO 407 Providing and fixing on walls/ ceiling/ floor 25mm dia.CPVC pip ewith necessary fittings,remaking good the demolished portion etc. complete.Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.57

ITEM NO 408 Supplying, erecting, testing & commisioning GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no. CP/SH/CR ( For AC duct) CSR 6-1-2

ITEM NO 409 Supplying, erecting, testing & commisioning GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no. CP/SH/CR ( For AC duct) CSR 6-1-3

ITEM NO 410 Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete. CSR 3-11-82

ITEM NO 411 Duct Thermal & Underdeck Insulation: Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC 2007. CSR 3-11-83

ITEM NO 412 Providing and applying of acoustic insulation for air ducts with 25mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26SWG perforated aluminium sheets complete. CSR 3-11-84

ITEM NO 413 Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. CSR 3-11-88

ITEM NO 414 Supply, installation, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. CSR 3-11-81

ITEM NO 415 Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. CSR 3-11-80

ITEM NO 416 Supply, installation, testing and commissioning of Extruded Aluminium Construction powder coated Jet nozzle (201-400 cfm) Approved MR

ITEM NO 417 Supply, installation, testing and commissioning of Extruded Aluminium Construction powder coated Jet nozzle (401-600 cfm) Approved MR

ITEM NO 418 Supply, installation, testing and commissioning of Extruded Aluminium Construction powder coated Jet nozzle (601-800 cfm) Approved MR

ITEM NO 419 Supplying and erecting iron work, sheet metal work consisting of MS sheets,various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.(FOR OUT DOOR UNIT) CSR 6-1-19

ITEM NO 420 Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system. CSR 3-11-79

ITEM NO 421 Inline fans: Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete. CSR 3-11-60

ITEM NO 422 Inline fans: Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete. CSR 3-11-61

ITEM NO 423 Propeller Fan: Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF CSR 2-9-17

ITEM NO 424 Propeller Fan: Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF CSR 2-9-14

ITEM NO 425 Supplying and erecting PVC insulated PVC round sheathed FR 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 Kv ( Control cable) CSR 1-3-13

ITEM NO 426 Supplying ande recting HMS PVC conduit 20mmdia.with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. CSR 1-2-3

ITEM NO 427 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-32

ITEM NO 428 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-33

ITEM NO 429 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-34

ITEM NO 430 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from16SWG GI sheet of 300mm width & 75mm height complete with necessary coupler plates & hardware. CSR 7-11-8

ITEM NO 431 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from16SWG GI sheet of 150mm width & 75mm height complete with necessary coupler plates & hardware. CSR 7-11-6

ITEM NO 432 Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW (earth wire for earthing of trays) CSR 1-3-1

ITEM NO 433 Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-7

ITEM NO 434 Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-8

ITEM NO 435 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. CSR 3-11-16

ITEM NO 436 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-18

ITEM NO 437 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-19

ITEM NO 438 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-20

ITEM NO 439 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation CSR 3-11-21

ITEM NO 440 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. CSR 3-11-22

ITEM NO 441 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. CSR 3-11-86

ITEM NO 442 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-97

ITEM NO 443 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-96

ITEM NO 444 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-95

ITEM NO 445 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-94

ITEM NO 446 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages,fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-93

ITEM NO 447 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-92

ITEM NO 448 supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-91

ITEM NO 449 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-90

ITEM NO 450 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. CSR 3-11-89

ITEM NO 451 Supply,erecting and terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3core 2.5 sqmm copper conductor complete erected with the glands and lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-14

ITEM NO 452 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-36

ITEM NO 453 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-8

ITEM NO 454 Supplying and erecting 25mm dia. corrugated flexible polypropylene conduit CSR 1-2-2

ITEM NO 455 Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm.900 RPM complete erected in position as per specification no. FG-FN/EXF CSR 2-9-16

ITEM NO 456 Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size. CSR 3-11-87

ITEM NO 457 Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. CSR 3-11-88

ITEM NO 458 Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for AC unit CSR 3-10-24

ITEM NO 459 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. CSR 7-11-6

ITEM NO 460 Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete CSR 3-11-5

ITEM NO 461 Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. CSR 3-11-9

ITEM NO 462 Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 5.1TR (2040 cfm) to 6.0TR 2400 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete. CSR 3-11-55

ITEM NO 463 Supply, installation, test ing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 8.0TR (3200 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device,cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete. CSR 3-11-56

ITEM NO 464 Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. CSR 3-11-66

ITEM NO 465 Supplying and erecting circular flexible/rigid PVC pipe duct of size 200mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. CSR 3-11-67

ITEM NO 466 Supplying, erecting, testing & commisioning GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of e namel paint as per specification no. CSR 6-1-4

ITEM NO 467 Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condensor,dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. AP-AC/ WAC CSR 3-2-18

ITEM NO.468 Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

200mm dia CSR 13-6-10

150mm dia CSR 13-6-9

100mm dia CSR 13-6-8

80mm dia CSR 13-6-7

65mm dia CSR 13-6-6

50mm dia CSR 13-6-5

40mm dia CSR 13-6-4

32mm dia CSR 13-6-3

25mm dia CSR 13-6-2

ITEM NO.469 Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV CSR 13-7-36

ITEM NO.470 Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV CSR 13-8-2

ITEM NO.471 Supplying and erecting 63mmdia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL CSR 13-8-4

ITEM NO.472 Supplying and erecting gunmetal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specificationno.FF FFA/NZ CSR 13-8-7

ITEM NO.473 Supplying and erecting brass orifice plate having 6 mm. thickness, 160 mm outer dia with required diameter of inner hole at every double outlet hydrant valve as per specification no. FF-FFA/OP CSR 13-8-17

ITEM NO.474 Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) CSR 13-8-20

ITEM NO.475 Supplying and erecting 300mmdia 1.5m in height air vessel / tank fabricated frommin 5mmthickM.S. sheet completeas perspecification no. FF-FFA/ACT CSR 13-8-12

ITEM NO.476 Providing coating of bitumen paint & pipeline corrosion resistant Pypkote tape conforming to IS 10221 Appendix B specification having 4mm thick wrapping for underground 100 mm ring main of fire fighting system. (Pypkote tape comprises of a Tar based Polymeric mix supported on a fabric of high tensile strength Fibreglass). CSR 13-6-11

ITEM NO.477 Providing coating of bitumen paint & pipeline corrosion resistant Pypkote tape conforming to IS 10221 Appendix B specification having 4mm thick wrapping for underground 150 mm ring main of fire fighting system. (Pypkote tape comprises of a Tar based Polymeric mix supported on a fabric of high tensile strength Fibreglass). CSR 13-6-12

ITEM NO.478 Supplying and erecting 20/25mmdiagunmetal air release cock, with necessaryG.I. couplingtobefittedontopofairvesseloronwetrisercomplete as per specification no. FF-FFA/ARV CSR 13-8-13

ITEM NO.479 Supply inganderecting Ball Valve complete with PN16 pressurerating, as per specification no. FF-VL/BV

a)50 mm dia CSR 13-7-41

b)32 mm dia CSR 13-7-40

C)25 mm dia CSR 13-7-39

ITEM NO.480 Supplying and erecting cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

a)200 mm dia CSR 13-7-22

b)150 mm dia CSR 13-7-21

C)100 mm dia CSR 13-7-20

d)80 mm dia CSR13-7-19

e)65 mm dia CSR 13-7-18

f)50 mm dia CSR 13-7-17

ITEM NO.481 Supplying, erecting, testing and commissioning vane type water flow detector 75/80 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes. as per specification no. FF SPR/WFD CSR 13-11-4

ITEM NO.482 Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes. as per specification no. FF SPR/WFD CSR 13-11-5

ITEM NO.483 Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR./UP CSR 13-11-1

ITEM NO.484 Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS CSR 13-11-2

ITEM NO.485 Supplying, erecting, testing and commissioning of concealed quartzoid bulb sprinkler, 15 mm (½") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON CSR 13-11-3

ITEM NO.486 Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP CSR 13-11-7

ITEM NO.487 Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1200 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP CSR 13-11-8

ITEM NO.488 Supplyinganderecting, testing and commissioning of 100mm dia. installation control valve(Alarm Valve) of cast ironbody, brass/bronzeworking parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gongbell tosound continuous alarm when the wetriser/sprinkle rsystemactivates,pressure gauges,emergency releases,strainer, pressure switch,cock valve complete with drainvalvean dbypass, testcontrol box, ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV CSR 13-7-42

ITEM NO.489 Supplyinganderecting, testing and commissioning of 150mm dia. installation control valve(Alarm Valve) of cast ironbody, brass/bronzeworking parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gongbell tosound continuous alarm when the wetriser/sprinkle rsystemactivates,pressure gauges,emergency releases,strainer, pressure switch,cock valve complete with drainvalvean dbypass, testcontrol box, ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV CSR 13-7-43

ITEM NO.490 Supplying and erecting 100 mm dia.pressure gauge,0-300PSI or 0-14kgper cm square fitted with 12/15 mm dia.pad cock valve,erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG CSR 13-8-14

ITEM NO.491 Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIAMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003 CSR 13-8-19

ITEM NO.492 Supplying and erecting gunmetal single outlet hydrant valve fittedwith necessary accessories complete as per specification no. FF-VL/HV CSR 13-7-35

ITEM NO.493 Supplying and erecting 63mmdia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL CSR 13-8-4

ITEM NO.494 Supplying and erecting gunmetal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specificationno.FF FFA/NZ CSR 13-8-7

ITEM NO.495 Supply inganderecting 150mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC CSR 13-8-10

ITEM NO.496 Supplying and erecting irebrigade header (Siameseconnection) of150mm dia, for supplyingwater in fire tank complete as per specification no. FF FA/FMC CSR 13-8-11

ITEM NO.497 Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850LPM at 80 to 60 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45kW or of suitable kW capacity for anual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with lass-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP CSR 13-1-4

ITEM NO.498 Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 rade),echanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as equired. (c) M.S. fabricated common base plate, coupling,guard,foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper evelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP CSR 13-4-2

ITEM NO.499 Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP CSR 13-2-1

ITEM NO.500 Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP CSR 13-3-1

ITEM NO.501 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG CSR 13-8-14

ITEM NO.502 Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-22

ITEM NO.503 Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV CSR 13-7-25

ITEM NO.504 Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-23

ITEM NO.505 Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS CSR 13-7-8

ITEM NO.506 Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-22

ITEM NO.507 Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-21

ITEM NO.508 Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV CSR 13-7-20

ITEM NO.509 Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF?VL/BFV CSR 13-7-19

ITEM NO.510 Supply inganderecting 12/15mm dia pressure switch withprovide disolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS CRS 13-8-15

ITEM NO.511 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. CSR 13-14-1

ITEM NO.512 Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS CSR 13-7-7

ITEM NO.513 Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS CSR 13-7-5

ITEM NO.514 Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV CSR 13-7-26

ITEM NO.515 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV CSR 13-8-13

ITEM NO.516 Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications CSR 13-5-1

the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 22kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features & switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitablerating. 4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch. 5. TPN SPD 100kA Type 1 +2 tested.

ITEM NO.517 Add On A4 For main electric motor driven fire hydrant system pump of 55kW capacity & relevant capacity jockey pump add Rs…

ITEM NO.519 Add On E1 For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, add Rs....... 1 for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs

ITEM NO.520 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-16

ITEM NO.521 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3 core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-14

ITEM NO.522 Supplying & erecting single compression type brass cable glands for 3½ core 70 sq mm cable as per specification No. CB-GL CSR 7-7-6

ITEM NO.523 Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm cable as per specification No. CB-GL CSR 7-7-2

ITEM NO.524 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No. CB-CL/CU CSR 7-9-1

ITEM NO.525 Supplying & erecting crimping type aluminium lugs for cable 70 sq mm complete as per specification No. CB-CL/AL CSR 7-10-5

ITEM NO.526 Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP CSR 13-2-1

ITEM NO.527 Jocky Pump Supplying, installation, testing and commissioning of jockey fire pump (JP)suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven byelectric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP CSR 13-3-1

ITEM NO.528 Booster Pump SSupplying, installation, testing and commissioning of booster fire pump [BP]suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP CSR 13-4-1

ITEM NO.529 Diesel Pump Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2250 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP CSR 13-4-2

ITEM NO.530 Providing & fixing AC Charger of model named as AC Type 2 with power rating of 7.4 kW & charging connector IEC62196-2 Gun, the input power supply should be of one phase with all required accessories. (For all 4 W of 2nd generation like Nexon, MG, Mercedes etc.) complete as per specification and drawing provided by the Engineer Incharge Approved MR

ITEM NO.531 Providing & fixing AC Charger of model named as Bharat AC01 with power rating of 3x3.3 KW & charging connector 3 nos. of 16 A Socket, the input power supply should be of three phase with all required accessories. (For 2/3 W & 4 W slow charging) complete as per specification and drawing provided by the Engineer Incharge Approved MR

ITEM NO.532 Providing & fixing DC Fast Charger of model named as CCS2 with power rating of 30 KW & charging connector 1 nos. of 30 KW CCS2 gun, the input power supply should be of three phase with all required accessories and the output current wil be 125 A per Gun. (For all 4 W of 2nd generation like Nexon, MG, Mercedes etc.) complete as per specification and drawing provided by the Engineer Incharge Approved MR

ITEM NO. 533 SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity :- 20 Passenger/1360Kg · Floors :- G+1 floor (2Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead. CSR 17-1-10

· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-claded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid Test Certificate issued by NABL accredited or Independent Test laboratory) · Lift car enclosure made from SS 304 grade solid(non-claded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with LED lights having light intensity of at least 100 lux in car, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audiovisual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor

· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, The Controller shall have necessary Protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output, Ascending Car Overspeed Protection etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self leveling operation, call cancel facility, auto return to home landing, fireman evacuation operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with Real-time clock management and Handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class

ARD complete with necessary SMF VRLA batteries shall be such that minimum three consecutive rescue operations can be performed without recharging for the maximum travel distance between two consecutive served stops. ARD have a suitable audio alarm with visual indication or voice annunciation in the lift car or lift controller to indicate “Low battery”. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 90 days with 20” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.

· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid Test Certificate issued by NABL accredited or Independent Test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.

· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning

ITEM NO.534 Add On A-5 For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-claded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrowsindicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete

ITEM NO.535 Supplying, installing, testing and commissioning of 20 kWp ON-GRID Solar pV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 60 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liasoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete upto net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. CSR 4-5-5

ITEM NO.536 Preparing Lawn (30 cm. depth):- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, leveling, and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, elinning rolling etc complete PARK AND GARDEN DSR

ITEM NO. 537 Preparing flower Bed:-Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms Mixing garden soil and manure thoroughly well, leveling, watering, on previous night. Planting seedlings of required annuals 25cms apart Maintaining till well established by watering. weeding, Stirring replacing of casualties etc, Complete. PARK AND GARDEN DSR

ITEM NO 538 GARDEN SOILSupplying on site garden soil well sieved 90% to pass through IS. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi, corporation Tax Transporting loading -unloading etc (Lead charges per 90 km. considered) PARK AND GARDEN DSR .

ITEM NO.539 FARM YARD MANURE:-Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box.(Farma)Item includes Transporting, loading -unloading etc (Lead charges per 30 kom. are considered) PARK AND GARDEN DSR

Plant should be healthy ,well rooted ,diseased free and free from any pest attack with sufficient moisture around root zone in pollybag. (Wherever applicable)

ITEM NO.540 Sapling of small & medium Ornamental flowering plants, Ornamental ficus, Mussanda etc. Thuja, Cupresus, Common Ornamental Shrubs for Shrubbery PARK AND GARDEN DSR

ITEM NO.541 Palm Varities (Red Palm, Fox Tail Palm, Bottle Palm, Rhaphis Palm, Table Palm, Cristal Palm etc.) 6-8Ft PARK AND GARDEN DSR

ITEM NO.542 Plants required for Landscaping: (Euphorbia, Hemelia, Malpbegra, Mussanda, Ticoma, Song of India, Golden Bamboo, Buddhas Bamboo, Goiden Ficus, Phonicus Palm X'mas Tree, Ficus Panda etc.) 4-5 ft PARK AND GARDEN DSR

ITEM NO. 543 Preparing Shrubbery - Excavating the ground to required depth of 30cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proporation to a height of 30cms. Mixing garden soil & manure thoroughly well, leveling, and watering on previous night, planting well developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete. PARK AND GARDEN DSR

ITEM NO. 544 Forrest Trees (Peltophorum,Bakul,Kecia,Neem,Tabobia,ETC) Annex B(8-10 FEET) PARK AND GARDEN DSR

ITEM NO. 545 Trimming of trees having girth between 2' to 5' MCGM R3-GW-8-2

ITEM No.546 Plant Protection measures for tree having girth between 2'to 5' MCGM R3-GW-8-22

ITEM NO.547 Quisqualis 24indica 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-205

ITEM NO. 548 Bougainvillea purviana Thimma 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-20

ITEM NO.549 Codieum variegatum Hybrid croton 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-37

ITRM NO. 550 Samanea saman Rain tree 4' to 5 ' height excluding pollybag MCGM R3-GW-5-295

ITEM NO. 551 Roheo discolor Rhoeo Nana 4" to 6" height excluding pollybag MCGM R3-GW-5-145

ITEM NO. 552 Roheo discolor Rhoeo Tall 4" to 6" height excluding pollybag MCGM R3-GW-5-146

ITEM NO.553 Delonix regia Gulmohar 4' to 5 ' height excluding pollybag MCGM R3-GW-5-261

ITEM NO.554 Verbena 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-158

ITEM NO.555 Chlorophytum laxum Dwarf Chlorophytum 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-40

ITEM NO.556 Chlorophytum comosum Spider Plant 6 “ to 9 “ height excluding pollybag MCGM R3-GW-5-39

ITEM NO.557 Mangifera indica Mango 4' to 5 ' height excluding pollybag MCGM R3-GW-5-284

ITEM NO.558 Providing and laying hand made tile of various size and approved designs for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Approved MR

ITEM NO.559 METAL BAFFLE CEILING : Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U- profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. SSR 52.35/468

The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60- 80micron. U- Profile to be connected to each other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate.

INSTALLATION: Installation of U-Grid: The U profile to be suspended at every 1200mm center to center using 6mm threaded rod from the structural soffit using U- profile hanger. U-profile splice to be used to join more than one U profiles of length 3.7M. 1st U-Grid Channel must be no more than 400mm from the perimeter. Installation of Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centers. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation should be carried out as per Manufacturer recommended procedure.

ITEM NO.560 Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 Kilogram/m suspended on 6 mm dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc. including all labour etc. complete. SSR 38.14/234

ITEM NO.561 Providing and fixing in position cement sheet having thickness 12 mm in provided Frame/Brickwall/RCC Member as directed by Engineer in Charge and Drawings . item to be completed in all respect including finishing of joints cut outs, including labour, material, lifts etc. all complete RA SSR 66/528

ITEM NO.562 Providing, fixing transporting and lifting upto 75ft of 80/114 mm corrugated Jinroc Roof Panel: Continuous line Mineralwool / Rockwool insulated corrugated panel having trapezoidal profile with max crest height of 34mm at maximum pitch of 250mm with Top & Bottom 0.5mm TCT PPGI sheet. The stonewool insulation shall be non-combustible grade of density 100 Kg/m3 with permissible tolerance as per IS 8183 and core shall be certified by EUCEB as noncarcinogenic, bio-soluble. The insulation material should be completely non- combustible having class A1 as per EN13501-1, shall have melting point of more 10000C as per ASTM E794; approved by fire test standards UL 723 and ASTM E84, the SDl and FSL value should be 0 as per the UL 723 testing. The Stonewool slab shall be cut into Lamella, rotated & uniformly glued through online oscillation process using PU based glue of reputed make and ensure high adhesive uniformity & proper bonding with sheet. Panel shall be joined together using tongue & groove joinery with max tolerance of 3mm and shall be packed online before the transportation to avoid scratches. The top profiled sheet of 0.5mm TCT PPGI and bottom Micro Ribbed of 0.5mm PPGI.

Sheet shall be of minimum 240 MPa RMP 120 GSM without guard film, 5- 7microns epoxy primer on both side of the sheet and polyester top coat 20-25 micron. The sheet shall have plastic protective guard film of minimum 25 micron to avoid scratches during transportation – Kingspan Jindal. Providing and fixing Flashing for aesthetic and support (girth up to 600 mm) Providing and fixing Gutter (girth up to 900 mm), (PVC nozzle length 300mm) (PPGI - 0.5mm thick). Fire Rated 2 Hr Approved MR

ITEM NO 563 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) SSR 51.19/355

ITEM NO.564 Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) SSR 51.20/355

ITEM NO.565 Providing & fixing Curtains as per drapery details. Including curtain rods & accessories. Spec. As directed by Engineer-In-Charge. Approved MR

ITEM NO. 566 ROLLER BLINDS - COLOUR BACKING Providing & fixing premium quality Roller blinds with prestress Solar protection fabric of high tenacity Polyester Yarn with PVC coating and fungi static treatment and should block the light flux & offer elimination of glare and sunlight /radiance etc. complete. Fabric shall have visible light & solar properties & greengaurd (gold) Indoor Air quality & children & school certified. Fabric composition - 39% Polyester / 61% PVC with alumium backing. Weight - 290 g/sq.m (+/- 5%) Thickness - 0.32 mm (+/- 5%) Fabric openness factor - 3% Tensile strength (warp / weft) - 160/170 daN/5cm Tearing Strength (warp/weft) - 11/13 daN Backing - Aluminium backing. Fungi static treatment - Degree 0 Excellent (EN ISO 846-A) Fire retardancy: B-s2,d0/EN 13501-1, class A/ASTM E84. MCGM - R3-CS-FUR-21

ITEM NO 567 Providing and fixing Storage made of 18 mm thk plywood with all external surfaces finished with approved laminate of 1.0 mm thk & all internal surfaces finished with white/offwhite laminate 0.8 mm thk. All wooden surfaces finished with melamine polish. etc complete. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.568 MEDIUM HEIGHT STORAGE Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. SSR 51.36

ITEM NO.569 FULL HEIGHT STORAGE Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. SSR 51.37

ITEM NO 570 LOCKERS Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. SSR 51.38

ITEM NO 571 Providing and fixing Luggage Racks (Size :-1.2 mX .45m ) made of 19mm thick ply shutters , finished with approved Veneer on all outer faces complete as per drawings and directions. Cost includes provision of approved hinges, door magnets, handles, etc. as per drawings and specifications. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO 572 Providing and fixing Podium with acrylic finish Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.573 Providing and fixing Wall panelling on wall with 12mm thick commercial BWR plywood / MDF mounted on ply support frame work with laser cutting and backlit With LED Finishing includes covering with approved laminate finish the outside of plywood, Teakwood beading at corners, skirting level and false ceiling level, etc. as per drawing. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO 574 Providing and fixing Wall panelling on wall with 12mm thick commercial BWR plywood / MDF mounted on ply support frame work with laser cutting and backlit With LED Finishing includes covering with approved Veneer finish the outside of plywood, Teakwood beading at corners, skirting level and false ceiling level, etc. as per drawing. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.575 Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete SSR 51.01/352

ITEM NO. 576 PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING : Of nominal width 100 / 150mm, having 80mm wide panel with 20mm reveal having a thickness of 15mm thickness and length 2400 mm. The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.7mm PVC edge banding along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of 20mm to attain an NRC of 0.4 for 150mm. / 0.5 for 100mm. module (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423. The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. The back of the panels shall be profile-grooved to receive 3600mm special main beam carrier with integrated factory fitted clips for installation. SUSPENSION: The panels shall be upward mounted on 24 mm wide T - section flanges having rotary stitching along the length of the beam with a web height of 43mm. SSR 53.41

ITEM NO 577 Providing and applying Wallpaper premium Qulaity Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO 578 Providing and supplying Banquet chairs with cushion of approved color. Complete as per specification provided by engineer incharge Approved MR

ITEM NO.579 MID BACK CHAIR Providing and supplying center pivot, revolving, Mid back chair Depth-45cm, width-50cm, height- 105cm to 115cm & seat height- 45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. MCGM R3-CS-FUR-30

ITEM NO 580 HIGH BACK CHAIR Providing and supplying center pivot, revolving, High back chair Depth- 45cm, width-50cm, height- 121cm to 131cm & seat height 45cm to 55cm. (+/- 2cm) with five legged metal /moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. MCGM R3-CS-FUR-29

ITEM NO. 581 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. SSR 51.41

ITEM NO.582 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery SSR 51.43

ITEM NO 583 VISITOR CHAIR Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height-80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. The chair shall be Ergonimc Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. MDGM - R3-CS-FUR-32

ITEM NO 584 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. SSR 51.44

ITEM NO 585 Providing and fixing 20 mm thick Laminated sheet board pelmet box 150 to 200 mm wide to doors or window frames including 20 mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top) etc.complete. Spec. As directed by Engineer-In-Charge. SSR:-37.15

ITEM NO 586 Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing etc complete SSR 51.06/353

ITEM NO 587 RECEPTION TABLE Providing and Supplying Reception table of overall size 1650 X 750 X 750 mm made out of 19 mm thick Marine ply (IS 710 : 2010) top Sides and apron having Top and bottom horizontal patta. The table shall be externally and internally finished with 4mm thick group match veneer pattern with grooves including necessary lipping moudling and hardware.5 mm thick thoughened glass modesty shall be provided with 50 X 30 mm BTC wood frame etc. complete. Antitermite treatement to marine ply and all wooden accessories on both sides for full faces before the joineries melamine polish on french polish base coat, hardware as per drawings. etc. all complete as per Architects Drawing. MCGM R3-CS-FUR-23

ITEM NO 588 Providing and fixing Concierge table (3.30 m x 0.75 m + 3.60 m x 0.75 m) - 0 .60 m width for main counter made of 18 mm thk marine plywood including table top, with drawers, shutters main support, internal supports, table top to have frosted glass partition fixed on wooden supports, all external surfaces finished with approved laminate of 1.0 mm thk & all internal supports finished with white/offwhite laminate 0.8 mm thk. All wooden surfaces finished with melamine polish. etc complete.loacation-atrium Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO 589 LOUNGE SOFA Providing and Placing Lounge Chair are made of steel pipe 30 to 35 mm dia of 16 swg. Frame chrome plated, seat & back made of high density foam covered with tapestry approved by E-I- Charge. (Basic rate Rs. 300/- metre.)and having steel arms at the side, available in the following option etc. complete. MCGM R3-CS-FUR-16

3 seater R3-CS-FUR-16-c

ITEM NO.590 Providing and fixing Sofa-3 seater with upholstry (office) Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.591 Providing and fixing Sofa-2 seater with upholstry . Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.592 Providing and fixing Sofa-1 seater with upholstry Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.593 Providing and fixing Full Height Wooden Partitions- Veneer finish made with MR grade Plywood & partly glazed with 10 mm thk toughned glass, nesesary support frames as directed. Finishing complete in all respects with melamine polish to all surafaces & beads, etc. as shown in the drawings. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO 594 DEMOUNTABLE ALUMINIUM GLASS PARTITION - TYPE 1 Supply and instalaation of Demountable Modular Aluminium Frame Glass Partition, Singlre glazed system compromising of 10mm Toughnend Glass and Aluminium profile Sections of size 75MM x 30MM for fixing at Floor level and at false ceiling level with approximate brackets and expansion bolts of standardised S.S. Finish. All Hardware made of standardised S.S. finish etc. complete. The Profile features and double sided adhesive tape guarantees perfect structural union and sound insulation. Finishes exposed aluminium sections are anodized aluminium finish with 6463 T6 Grade. The Quantity for this item will be the glass panel of height 2100MM only. MCGM R3-CS-FUR-33

ITEM NO.595 Providing & fixing FULL HEIGHT BOTH SIDE LAMINATED PARTITION at required location having height more than 2.8 meter & minimum 77 mm thick made by using 50 x 50 mm (finished size) approved quality seasoned TW section framing at 600 mm center to center,covered with 12 mm marine ply generally confirming to I.S.303 / I.S.710-1980 on both sides.The partitions shall be finished with 1.5 mm thk.approved quality laminate matt/suede/fine line finished lamination pattern with grooves on both sides with necessary lipping (BTC) moulding. Antitermite treatment to plywood and woodwork, door frame including all leads & lifts etc complete as per Architect's Drawing and instructions of Engineer In Charge. MCGM R3-CS-RM-125

ITEM NO.596 Providing and fixing Partly glazed Sliding folding Partition wooden partition with veneer and melamine polish including mechanism Approved MR

ITEM NO.597 Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. SSR 52.5/447

ITEM NO.598 Providing and fixing double/single leaf wooden shutter for partly paneled partly glazed door 35mm without ventilator adopting sections and sizes as given in the standard specifications or as per detailed drawing, including fixtures and fastenings and finishing the wood work with veneer/laminate etc. including mouldings complete. (Without frame) Approved MR

ITEM NO.599 DRESSING TABLE @400LX 400DX 1800H Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker. SSR - 51.56

ITEM NO.600 Providing and fixing Dressing Tables (Size :-0.60 m X .45m ) with 2 sets of drawer & shutter below, made of 19mm thick ply shutters , finished with approved Veneer on all outer faces complete as per drawings and directions. Cost includes provision of approved hinges, door magnets, handles, etc. as per drawings and specifications. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.601 WARDROBE WITH MIRROR @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. SSR NO - 51.57

ITEM NO.602 Providing and fixing Gymnastic Equipment Complete per oylmpic size and standards as per Specification and drawings provided by the Engineer in Charge Approved MR

Iron Gymnastic Spring Board

Vaulting Table Heavy Duty POWDER COATED Steel Base with anti-skid / non-marking pads for floor protection. Top covered by non-slip fabric with reactive foam for improved rebound. Height adjustable

Vaulting BOX Made of seasoned wood and coated with clear PU

Gym Bench - Classic Made of seasoned wood and coated with clear PU

Gymnastic Parallel Bars Heavy Duty POWDER COATED Steel Base with anti-skid / non-marking pads for floor protection. Connection lock allows 360 degree Swivelling, which prohibits rattling & movement. Bars made of fibreglass covered with wood. Height adjustment

Gymnastic Balance Beams Heavy Duty POWDER COATED Steel Base with anti-skid / non-marking pads for floor protection. Height adjustment. Double lock height adjustment system for safety. Top covered with non-slip fabric.

Vaulting Horse Heavy Duty POWDER COATED Steel Base with anti-skid / non-marking pads for floor protection. Top covered by non-slip fabric with reactive foam for improved rebound. Height adjustable.

Pommel Horse Legs are made of heavy steel, pommel made of wood and top made of thick cushion covered with non tearing PVC coated fabric. Height is adjustable.

Uneven Bars Heavy Duty POWDER COATED Steel Base with anti-skid / non-marking pads for floor protection. Bars made of fibreglass covered with wood. Lower bar adjusts Upper bar adjusts from Includes easy adjustable cables with tensioners.

Horizontal Bar Uprights made of Heavy Duty POWDER COATED Steel. Pistons made of Heavy Steel & hot galvanized for longer life. Horizontal bar made of Stainless Steel mounted on column's head. Includes cables. Height adjustable from 175 cm to 285 cm with variation of 5 cm.

Trampoline - Etos

Gymntic Ring Twer

Swiss Ball

BARBELLS WITH various WEIGHT

CLIMBING ROPES (WHITE JUTE)

Wall Bar

Gymnastic Mat Foldable 2-3"

Balance Beam Safety Wrap

COLUMN & CORNER PAD

NON-FOLDING COMPETITION LANDING MAT

Tumbl Trak Gymnastic

Resi-Pit

3/4 SECTION TRAPEZOID TRAINER

ITEM NO.603 DINING CHAIR Providing and fixing SS (IS 6911:1992) grade of steel 304 Dinning chirs for dining Hall and dining Room area as per the drawing or approved size and shape including all lead lift shifting to work location etc. complete. MCGM R3-CS-FUR-25

ITEM NO.604 DINING TABLE Providing and Fixing Dining table of Overall S.S (IS 6911:1992),grade of steel 304, Thickness of the table is 40 mm Structure top to be Of s.s 18 SWG 304,Grit. Under Structure to be Vertical poles of 50 mm Dia (16 gauge 304 grade) and top and Bottomsupporting frame Structure to be 50 x 50 mm Square tube etc. complete. Glide shall be of Plastic fixed at the under structure to prevent the damage of table top during stacking. Legs shall be of SS and 38 mm dia (16 gauge 304 grades). pipe legs are fixed with under structure and table top etc. complete. MCGM R3-CS-FUR-24

6 SEATER 1800 X 1000 X 750 MCGM R3-CS-FUR-24-b

ITEM NO.605 FOR KITCHEN PLATFORM Providing and constructing granite Kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.(Platform top size 1.5 m x 0.60 m and height is 0.75 m) Spec. As directed by Engineer-In-Charge. SSR- 41.78

ITEM NO.606 KITCHEN TROLLEY Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) SSR 51.59

ITEM NO.607 WORKSTATION TABLE TOP (OFFICE) Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on unexposed face. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame etc. complete. Execution of this item should be make as per the instructions of Achitect in Charge.

Accessories Key Board Tray -. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). MCGM R3-CS-FUR-06

1200 X 600 MCGM R3-CS-FUR-06-a

ITEM NO.608 SECONDARY WORK TABLE TOP (OFFICE) Providing and supplying secondary work table top of required size with top made of 8mm thick bevelled glass and under structure made of 18mm thick Marine ply (IS 710 : 2010) with all exposed edge are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance etc. complete. Nylon button stopper to hold glass top in position, Nylon bushers etc. complete. MCGM R3-CS-FUR-12

900 x 500 R3-CS-FUR-12-a

ITEM NO.609 Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing. SSR 51.24

ITEM NO.610 EXECUTIVE OFFICE TABLE Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete.

Fixed Pedestal Unit Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thk Commercial Plywood (IS 303 : 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thk edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thk PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube, diameter 40 mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, 'C' Shape SS Brush finished handles as indicated in the drawing, suitable locking etc. complete.

Accessories Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provided with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated with seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided wherever required for the table top.

CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). MCGM R3-CS-FUR-04

2400 X 1050 X 750 R3-CS-FUR-04-k

ITEM NO.611 Conference Table @ 3600Lx1400Dx750HT Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos. SSR 51.31

ITEM NO.612 CONFERENCE TABLE DISCUSSION TABLE Providing and fixing of Modular table of required size. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Commercial Plywood (IS 303 : 1989) . All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Double modesty panel height max 450mm of 18mm Marine ply (IS 710 : 2010) in approved colour and shade as per pre- approved sample. Modesty panels to be separated by min 50mm clear gap between and cut-outs etc. to make to accommodate electrical/data switches/sockets where indicated. Cables from floor to the modesty panel should be concealed / fixed along with the table vertical supports etc. complete. Adjustable levellers to be provided to supports. MCGM R3-CS-FUR-09

1200 x 900 x 750 R3-CS-FUR-09-a

ITEM NO.613 SINGLE BED Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm.

The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.

Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate SSR 51.55

ITEM NO.614 Providing and supplying Single bed (size- 1.95 m x 0.90 m) - made of 18 mm thk plywood including top all surfaces finished with approved laminate of 1.0 mm thk as shown in the drawings. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.615 Providing and installation of square/Circular shape crystal golden/Silver finish TYPE 1 ceiling mount and flush mount chandelier/ LED Chandelier, including fixtures, fittings & scaffolding complete as per specication provided by engineer incharge Approved MR

ITEM NO.616 Providing and installation of square/Circular shape crystal golden/Silver finish TYPE 2 ceiling mount and flush mount chandelier/ LED Chandelier, including fixtures, fittings & scaffolding complete as per specication provided by engineer incharge Approved MR

ITEM NO.617 Providing and installation of square/Circular shape crystal golden/Silver finish TYPE 3 ceiling mount and flush mount chandelier/ LED Chandelier, including fixtures, fittings & scaffolding complete as per specication provided by engineer incharge Approved MR

ITEM NO 618 Providing and fixing Mirror Panelling with 12mm thick commercial BWR plywood / MDF mounted on ply support frame work. Finished with veneer Border frame and melamine polish. Teakwood beading at corners, skirting level and false ceiling level, etc. as per drawing. Basic cost of veneer Rs. 135/- per sq.ft. Spec. As directed by Engineer-In-Charge. Approved MR

ITEM NO.619 Stainless steel nameplate : Providing and Fixing the 150mmx50mm Stainless steel nameplate as per specification provided by engineer incharge. Approved MR

ITEM NO.620 Supply and installation of digital projector having Full HD 1080p resolution with White and Colour Brightness at range of 3000-4000lm,HDMI port, USB port, AV port, computer port with spring loaded white screen connected with necessary copper mains, required switchgears. complete as per specifcation provided by engineer in charge. Approved MR

ITEM NO.621 Supply and installation of 7000 Lumens Smart 4K UHD HDR Laser Projector, With 3M:1 contrast ratio, With 8.3 mega pixels utilizing 4K UHD (3840 x 2160) resolution, 7,000 ANSI Lumens Brightness. USB port, AV port, computer port with spring loaded white screen connected with necessary copper mains, required switchgears. complete as per specifcation provided by engineer in charge. Approved MR

ITEM NO.622 Providing & Fixing in position, Carpet more than 800+ gsm, made with 100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete SSR 51.13/354

ITEM NO.623 Providing & Fixing Rod (2meter length) & Accessories for Carpet on Steps including brass finish. etc. as per architect's instructions Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.624 Providing and fixing Studio table (3.05 m x 0.90m)made of 18 mm thk plywood including table top, Side credenza with two drawers, two shutters main support, internal supports, all external surfaces finished with approved laminate of 1.0 mm thk & all internal supports finished with white/offwhite laminate 0.8 mm thk. All wooden surfaces finished with melamine polish. etc complete. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.625 Providing & Supplying Audio Console Rack - (Size-0.60 m x 1.80 m) Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.626 Providing and supplying Cafe table ( Square shape ) - with laminate finish.(table size -out of 0.90 m x 0.90 m) All wooden surfaces finished with melamine polish with moulding finish.location :-Kitchen & Cafe Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.627 Providing and supplying standard Bench seating ( size -out of 3.00m x 0.60 m) . as shown in the drawings.location :-Kitchen & Cafe Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.628 Providing and supplying standard High bench seating ( size - out of 11.30 m x 0.60 m) . as shown in the drawings.location :-Kitchen & Cafe Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.629 Providing and supplying Center table - type 01 Table Top with Toughened Glass & Metal Legs with natural wooden polish Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO.630 Providing and supplying Center table - ( Square / Round shape ) - with laminate finish.(table size -out of 1.20 m x 1.20 m) All wooden surfaces finished with melamine polish with moulding finish. Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO. 631 Providing and supplying Corner table Top with Toughened Glass & Metal Legs with natural wooden polish Approved MR Spec. As directed by Engineer-In-Charge.

ITEM NO. 632 BUNK BED Providing and positioning bunk bed made out of approved colour, powder coated, M.S. (IS 513:2008) pipe frame and angle supports. Two end frames shall be made out of 16 guage and 40 mm dia M.S pipes as vertical supports and 16 guage 25 mm dia M.S pipes along with 40 x 40 x 6 mm M.S angle lateral frame to recieve 12mm thk marine grade ply base for 100 mm thk ,100 density coir mattress etc. complete. Edges of the base ply shall be sealed with 6mm thk T.W lipping. Two nos of 25 mm dia 16 guage pipe supports shall be provided to support both the base ply and ladder and with necessary Nylon bushers for pipe ends touching to floor and with approved colour powder coating and complete as per the instructions of the Architect or Engineer in charge. Note: This item shall be made in knock down type of arrangement. MCGM R3-CS-FUR-27

ITEM NO.633 L - SHAPE WORKSTATION TABLE TOP WITH ONE GABLE END SUPPORT Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame. Gable End Supports of approved profile and design between tables consisting of 18mm Marine ply (IS 710 : 2010) panels duly edge bound (to be integrated with the partition. Adjustable levellers to be provided to supports.) etc. complete.

Accessories Key Board Tray - Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. (Coating thickness 50 to 60 micron) MCGM R3-CS-FUR-07

1500 X 600 & side 900 x 600 MCGM R3-CS-FUR-07-b

ITEM NO.634 CHANNELLED WALL PANELLING CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MM Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mm of visible pane (G-13/ G-21). The edges of the panel shall be “tongue-and- grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mOne Metric Tonnehe panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge.

Installation: An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre- to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Manufacturer recommended procedure. SSR 51.233

ITEM NO.635 CABIN SOFA Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. complete. MCGM R3-CS-FUR-17

3 seater R3-CS-FUR-17-c

1 seater R3-CS-FUR-17-a

ITEM NO.636 SIDE / BACK CREDENZA (750mm) Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be make as per the instructions of Achitect in Charge. MCGM R3-CS-FUR-13

1200 x 500 x 750 R3-CS-FUR-13-b

ITE M NO.637 STAFF OFFICE TABLE Providing and fixing of Modular table of required size. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete.

Accessories Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provided with sliding telescopic channels. The tray hanged below the top by steel by MS Brackets. Finish. All steel components should be epoxy powder coated with seven tanks anti corrosion pre- treatment of surface. ABS wire managers to be provided wherever required for table top. CPU Trolley : - Width: 180mm Depth: 245 mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pre- treatment of surface. ( Coating thickness 50 to 60 micron). MCGM R3-CS-FUR-01

1500 x 750 x 750 R3-CS-FUR-01-f

ITEM NO.638 Float glass sheet of nominal thickness 5mm. MCGM MA-BLD-AW-8

ITEM NO.639 COMPUTER TRAINING TABLE Providing and fixing of Modular table of required size. Table top shall be made of 25mm Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete.

Accessories Key Board Tray - 2 Nos. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: 2 Nos. Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pre-treatment of surface. (Coating thickness 50 to 60 micron).

1200 x 600 x 750 R3-CS-FUR-03-a

ITEM NO.640 Providing and fixing 80mm thk. Glass bricks of approved make, size and type in glass block adhesive including filling joints with glass block grout, cleaning etc. complete as directed by Engineer in charge. MCGM R3-CS-FL-19

ITEM NO. 641 NATURAL BAMBOO WALL PANELLING FOR CASH COUNTER Providing & fixing of Wooden Grill panel with backer made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09- 0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at 150mm from both the edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%. SSR 53.45

ITEM NO.642 TOUGHNED FIXED GLASS Providing and fixing 12mm thk toughened etched glass as per the design, as per the design. Glass to be fixed at top & bottom in heavy guage aluminium 'c ' channel concealed in floor & boxing. Cost to be inclusive of silicon sealant to the periphery of the glass as directed. MCGM R3-CS-AW-19

ITEM NO.643 SS ROD FOR BACKREST AT VIEWING SEATING AREA Providing, detailing, and fabricating as per specifications, transporting to site and erecting ladder / railing using stainless steel hollow pipes of grade 304 including, S.S. fixtures and fastenings, cleats, stiffeners, gussets etc. and all necessary operations straightening, bending, like cutting, drilling, welding, grinding and removing the welding burr, machining if specified, finishing, cleaning etc. complete as directed by Engineer In Charge. MCGM - R3-CS-SS-23

ITEM NO. 644 FROSTED GLASS FILM FOR GLAZING WINDOW Providing &Fixing frosted film manufactured by 3 M approved equivalent on glass partition wherever required as per the instruction of Architect. MCGM R3-CS-RM-137

ITEM NO. 645 WOODEN DIAS WOODEN DIAS : Providing and fixing Wooden Dias of size 600 x 600 x 1420 mm height in as per the detail specification given below. Top size (600 x 600 mm ) side (600 x 1420 mm), front side (600 x 1420 mm) made up in 19 mm thick Marine Plywood (IS 710 : 2010) of requisite manufacturer's viz. Green / Anchor / Centuary or equivalent approved make including necessary facias etc. with necessary lipping (BTC), mouldings as required including cutting, fixing, finished with 1 mm thick laminate of approved make ,type , colour and shade of glossy / Matt / Suede / Fine / Line / Wood grain finished lamination pattern with / without grooves as required to exposed surface and edges and the internal / hidden surface shall be finished with 0.80 mm thick laminate of approved make. Area other than laminated surfaces shall be finished with two coats of French polish of approved shade. Antitermite treatment to plywood and woodwork with ten years guarantee bond etc. including all leads lifts etc. complete as per the instructions of the Architect & Engineer-in-charge. MCGM R3-CS-FUR-26

Bitcon India Infrastructure Developers Pvt Ltd (BID ID -6426326)