Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹6.1 L
Closing Date
19 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT SIG
14 conditions · 3 needing a document upload
IR GCC 2022 ACS 1 CLAUSE 10.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
IR GCC 2022 ACS 1 CLAUSE 10.1 - 1. Technical Eligibility Criteria: (As Per IR GCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted (If MEC Applicable), this shall be on bidder's name. NOTE - SUBSTANTIALLY COMPLETED WORKS IS DEFINED IN TENDER DOCUMENT ATTACHED HEREWITH vide Para 10.5 of GCC April 2022 with latest applicable ACS.Similar nature of the work:- Any work of EI / PI / RRI / ABS/ IBH/ LC Gate interlocking work which include indoor and outdoor signalling work.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
13 conditions · 1 needing a document upload
The local content requirement for this work is minimum 50% for Make in India compliance. The offer submitted by the firm against this tender shall be in compliance of Order No. P- 45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Minstry of Commerce and Industry attached with this tender as PDF. Non-compliance of this Make in India order in the offer submitted by the firm shall lead to summarily rejection of the offer. The tenderer shall enter local content percentage under Sl. No. 2 of Commercial-Compliance with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The said suppliers of goods and/or services would be subject to GST Act and rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
In case of sole proprietorship Firm: A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. OR for Partnership Firms: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. OR For Company registered under the Company's Act: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization /Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. OR For Registered Society and Registered Trust: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed. (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. OR For Limited Liability Partnership (LLP) Firms: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation. (iii) A copy of Power of Attorney /Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In Absence of these documents, offer of the firm will be summarily rejected. For more clarification regarding this, pls refer GCC April 2022 with latest ACS available on railway official website.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
Special Conditions of Contract for Mandatory Updating of Labor Data or Railway's Shramikkalyan Portal by Contractor as per Railway Board's letter No2018/CE-I /CT/4 dated 17.10.2018: In order to increase in payment of contract labour wages and other payments aweb-based e- application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in All contractors are required to upload details of their LOAs, engaged workmen, wage payment details,|PF/ESI details, bonus details etc., on monthly basis. The details so uploaded shall be available in public domain.. In order to ensure the compliance and fulfillment of these instructions, following action is required to be completed by contractors: A) Contractor is to abide by the provisions of Payment of Wages Act and Minimum wages Act in terms of Clause 54 and 55 or Indian Railways General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in . Contractor shall register his firm/company etc. and upload requisite details of labor and their payment in this portal. These details shall be available in public domain. The Registration/updating of Portal shall be done as under:-a )contractor shall apply for one time registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance Engineer shall approve the contractor's registration on the portal within 7 days of receipt of such request. b)Contractor once approved by any Engineer, can create password with login 1D (PAN No.) for subsequent use of portal for all LoAs issued in his favor. c)The contractor once registered on the portal, shall provide details of his letter of Acceptance (LOA)/Contract Agreements on Shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such requested) After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on Shramikkalyan portal on monthly basis. e)lt shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour and payments made thereof after each wage period. B)While processing payment of any On Account bill or Final bill or release of Advances or Performance Guarantee/Security Deposit, Contractor shall submit a certificate to the Engineer or Engineer's representatives that I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal atwww.shramikkalyan.indianralways.gov.in till..Month... Year......
GCC April 2022 with latest ACS has been introduced and published/available on railways website. The provisions of GCC 2022 or latest amendments released till the time of date of publishing of tender will be applicable on this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work.
Interlocking of LC gate No. 146, 131 & 136 along with associated signalling and telecom work in RTA-MKC Section over Bhopal division.
BPLNWKS2026-27SIG04~WCR
BPLNWKS2026-27SIG04
Open
Works - General
9 Months
Bhopal, Madhya Pradesh
₹0
₹6.1 L
19 Jun 2026
26 May 2026
5 Jun 2026
120 items across 4 schedules · ₹3,06,98,447.86 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Relay rack assembly complete with scaffolding, fixtures and accessories including MS bars for fixing of relay, plug board, string rods, fuse strips with bracket, 11 way Bus bars with cover and mounting brackets, runway for cable/wires, Relay frame, base assembly etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure-I. Rack should be made of first class steel powder coated painting and rack manufacturer's certificate should be submitted. (Material Inspected by Consignee) | Set | 6.00 | 38,803.23 | 2,32,819.38 |
| 2 | Supply of Main CableTermination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal/WAGO-make terminal blocks, ladder, string rods,frame, base assembly,insulators, J bolt, nut/bolts & fasteners (bakelite strips) etc.Siemen's type & as per extantpractice on W. C. Rly. Typical part list as per Annexure-II and rack arrangement shall be as per sketch Sk-727. (Material Inspected by Consignee) | Set | 3.00 | 35,355.34 | 1,06,066.02 |
| 3 | Supply of Metal-To-Metal Universal LED ECR without base plate, ABB Make or functional equivalent and should be suitable for working with LED Based Signal lighting Unit. (Material Inspected by RDSO) | Numbers | 42.00 | 14,604.09 | 6,13,371.78 |
| 4 | Supply of QNA1 (AC immunised relay), 12F- 4B and 8F-8B, 24VDC along with plug board (Base plate), retaining clips and connectors conforming to BRS:931A ; IRS S 34 ; IRS S 23 ;IRS S 60-78.Break-up of configuration will begiven by railways before supply of material. (Material Inspected by RDSO) | Numbers | 12.00 | 3,569.8 | 42,837.6 |
| 5 | Supply of Relay Non-AC Immune, plug-in- type, DC Neutral Line 60V 4F/4B,5F/3B, 6F/2B contacts, front and back contacts metal to metal, conforming to IRS: S 46 and firm's specification. The relay housing shall contain two miniature identical relays in mini group housing complete with base plate,Siemens make or functional equivalent. (Material Inspected by RDSO) | Numbers | 72.00 | 9,068.82 | 6,52,955.04 |
| 6 | Supply of Relay plug-in- type, Mechnical Interlocked Relay, 24V/60V (Metal to Metal) IRS:S-46 with Amdt.1 ; firm?s specn , IRS S 23-88 ; IRS S 34-68, in mini group housing contain two miniature identical relays with contact configuration 4F-4B, 5F-3B, 6F-2B, metal to metal with base plate of same make. Make - Siemens or equivalent. (Material inspected by RDSO) | Numbers | 12.00 | 7,880.44 | 94,565.28 |
| 7 | Supply of Time Element Relay (Clockwork type) AG timer Siemens Make (No. RSSK30/0052) or equivalent with timer range up to 120seconds. (Material Inspected by Consignee) | Numbers | 12.00 | 8,136.3 | 97,635.6 |
| 8 | Supply of fail safe electronic flasher device as per Specification No.RDSO/SPN/173/2002. (Material Inspected by RDSO) | Numbers | 6.00 | 27,047.71 | 1,62,286.26 |
| 9 | Supply of Key Lock Relay AC immunized 24V DC /60VDC with different ward combinations (Five No. of ward plate for Point Machine to be supplied with each relay) of Siemens Make or functional equivalent. (Material Inspected by RDSO) | Numbers | 3.00 | 11,067.16 | 33,201.48 |
| 10 | Supply of Pre-wired Crank Handle cum key lock relay box along with LEDs,TEKNIC/SIEMENS or similar make push buttons, 8-wayterminal strips / wago terminal,string rod, etc. (Material Inspected by Consignee) | Numbers | 3.00 | 9,511.81 | 28,535.43 |
| 11 | 12 Volt hooter 12 make Radix,minda, macony or similar. (Material Inspected by Consignee) | Numbers | 6.00 | 396.08 | 2,376.48 |
| 12 | Supply of PVC insulated flexible wire 16/0.2 mm dia as per RDSO spec. Nos.IRS:S-76/89 with latest amendments of various colours to be decided by Sitein-charge.(Material Inspected by RDSO) | Kilometre | 1.50 | 9,009.59 | 13,514.39 |
| 13 | Supply of flexible cable single core multistrand copper conductors, 1x10sq. mm confirming to RDSO specification IRS:S:76/89 with latest amendments. (Material Inspected by RDSO) | Kilometre | 0.30 | 1,36,486.96 | 40,946.09 |
| 14 | Supply of flexible cable single core multistrand copper conductors, 1x16sq. mm confirming to RDSO specification IRS:S:76/89 with latest amendments. (Material Inspected by RDSO) | Kilometre | 0.30 | 2,01,848.41 | 60,554.52 |
| 15 | Supply of PVC insulated railway signalling indoor single core [ tinned jumper wire] 1X0.6 mm dia. as per RDSOspec. Nos. IRS:S- 76/89 with latest amendments of various colors to be decided by Site in-charge. (Material Inspected by RDSO) | Kilometre | 12.00 | 3,036.54 | 36,438.48 |
| 16 | Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/SPN/189/2004 version 3.0 with latest amendment.(Material Inspected by RDSO) | Numbers | 2700.00 | 61.33 | 1,65,591 |
| 17 | Supply of end plate suitable for disconnect terminal. (Material Inspected by Consignee) | Numbers | 270.00 | 13.65 | 3,685.5 |
| 18 | Supply of end stop suitable for disconnect terminal block. (Material Inspected by Consignee) | Numbers | 540.00 | 11.95 | 6,453 |
| 19 | Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. (Material Inspected by Consignee) | Metre | 36.00 | 163.5 | 5,886 |
| 20 | Supply of fire extinguisher having Composite/SS/Aluminum Cylinder of same fire rating as per latest BIS: 15683:2018 and as per specific service pressure requirement for use. Fire Extenguisher CO2 ty (Material Inspected by Consignee) | Numbers | 12.00 | 6,680.86 | 80,170.32 |
| 21 | Supply of Goods warning Board/shunting limit board as per Drg No. DyCSTE/C/BPL/003. It also includes supply of M S Channel, Nut & Bolt etc as per drg. (Material Inspected by Consignee) | Numbers | 6.00 | 3,657.14 | 21,942.84 |
| 22 | Supply of Fuse auto changeover system for used in Railway Signaling System as per RDSO/SPN/209/2012 Ver - 2with latest amendments. One Automatic changeover Unit comprise 32 nos. of external Non Deteriorating Type or 'G' type fuses from 0.6 Amp to 4 Amp capacities which are in signaling circuits. System shall have 8 cards with monitoring arrangement of 4 fuses in one card. (Unit read as "Per module "). (Material Inspected by RDSO) | Set | 6.00 | 26,854.13 | 1,61,124.78 |
| 23 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG.No. SA 23001/A/M (Adv.) andas per SPEC. No.RDSO/SPN/194/2006 Rev.2.0 or latest and FRP material as perRDSO SPEC. No.RDSO/SPN/151/1997 or latest. (Material Inspected by Consignee) | Numbers | 18.00 | 23,186.79 | 4,17,362.22 |
| 24 | Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 1.6 A. (Material Inspected by RDSO) | Numbers | 60.00 | 117.56 | 7,053.6 |
| 25 | Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 0.6 A.(Material Inspected by RDSO) | Numbers | 60.00 | 112.66 | 6,759.6 |
| 26 | Supply of INDICATIVE TYPE OF FUSE INSERTS. Without holder 1.6 A.(Material Inspected by RDSO) | Numbers | 60.00 | 34.13 | 2,047.8 |
| 27 | Supply of INDICATIVE TYPE OF FUSE INSERTS. Without holder 0.6 A.(Material Inspected by RDSO) | Numbers | 60.00 | 34.13 | 2,047.8 |
| 28 | Supply of Apparatus Case with miniature 'E' type locks with keys (1key per 5 location boxes) of ward No.42 (E type lock & key as per spec. No.IRS S 30 & RDSO Drg. No. SA 3376/M& 3377/M respectively with latest amendment) on both the doors duly painted with red oxide. Single case as per Drg No. WS-8842/A with latest alteration. (Material Inspected by Consignee) | Numbers | 15.00 | 12,934.14 | 1,94,012.1 |
| 29 | Supply of Phenolic Laminated sheet,resin bonded 10 mm thick, grade P3 in standard size of 1.22 X 1.22 Mtr as perspec. No. IS 2036 of 1974. (Material Inspected by Consignee) | Numbers | 15.00 | 3,037.66 | 45,564.9 |
| 30 | Supply of A/AG/C/P/G board as per RDSO Drg. No. SA 23455-56 RST- 5211445 & SA 23476-77 as applicable. (Material Inspected by Consignee) | Numbers | 12.00 | 564.76 | 6,777.12 |
| 31 | Supply of Lamp holder and switches , Two pin ( Backellite type) for location boxes ( Anchor make or ISI mark) . (Material Inspected by Consignee) | Numbers | 15.00 | 103.64 | 1,554.6 |
| 32 | Supply of Signal No. plates retro refective type as per WCR standard practice. (Material Inspected by Consignee) | Numbers | 12.00 | 516.01 | 6,192.12 |
| 33 | Supply of Pad locks Godrej/ Hand Cuff Locks with common key. (Material Inspected by Consignee) | Numbers | 36.00 | 281.7 | 10,141.2 |
| 34 | Supply of universal earth leakage detector for 8 channel (110V AC/24VDC /60V DC/110V DC) as per RDSO spec. No. RDSO/SPN/256/2025 version 2.0 with latest amendment.(Material Inspected by RDSO) | Set | 6.00 | 95,415.16 | 5,72,490.96 |
| 35 | Supply of LED type Indication cum operating panel to be made of size of 54 mm x34mm cover plates depicting the yard layout, unit signal,track etc. of minimum size(12x8) siemens type Dominos complete wired with full components. The panel should have polycarbonate sheet cover on top to avoid damage while in service Each of the working domino should have all 15 terminals components with wiring. Total No. of Domino (12 x 8) = 96 Nos.Size 54 mm x 34 mm. The length approximately 730 mmx 450 mm. The height is approximately 910mm (rearside) and 820 mm (frontside). The panel should have poly carbonated sheet cover on the top. SPARE: 10% of working domino with cover plate completely wired and 10% of LEDs of each colour,10% (minimum three) of buttons, 10% of counter, 2 magnets, 1 buzzer & 4 bulb extractors shall be handed over as spare after commissioning of the installation by the contractor. (Material Inspected by Consignee) | Numbers | 3.00 | 30,291.48 | 90,874.44 |
| 36 | Supply of Limit switch New Top Roller type with 2 No + 2 NC contacts as per RDSO 45 Balaji make model No.102TPR A or similar. (Material Inspected by Consignee) | Numbers | 3.00 | 607.42 | 1,822.26 |
| 37 | Supply of Electro Magnetic boom locking system with +VE VC boom locking, LED indicator panel with Buzzer and Indication circuit. Operating Voltage110VAC or 24 V DC with 110VAC/24VDC Adoptor. Electric current 500 MA Magnetic Lockin power 600 lbs. Magnetic convert Area for boom locking arrangement size 150 mm x 35mm. Fitting plate for boom barrier size 180 mm x 35 mm with lifting accessories written in drawing. IRS conditions will be applicable. As per specifications attached. (Material Inspected by Consignee) | Set | 6.00 | 8,537.55 | 51,225.3 |
| 38 | Supply of SMPS (Major) IPS system suitable for LC gate/RH hut in RE area along with 2V/300AH battery set along with spares and tools as per RDSO specification No. RDSO/SPN/165/2023 Ver. 4.0 with latest amendment. For connecting IPS to battery bank, 10 meter each of Red and Black colour Power cable of size as per battery 2V/300AH capacity is to be supplied by tenderer. 12 core x 1.5 Sq. mm signalling cable for connecting IPS to status monitoring panel will be supplied by railway. (Material Inspected by RDSO) | Set | 3.00 1065598.00 | — | 31,96,794 |
| 39 | Supply of Remote Terminal Unit with 128 digital and 16 analog inputs as per RDSO specification No. IRS:S-99/2006 (Amdt-3) or latest.(Material Inspected by RDSO) | Set | 3.00 | 2,07,382.74 | 6,22,148.22 |
| 40 | Supply of External Modem suitable for Networking of RTU. (Material Inspected by Consignee) | Numbers | 3.00 | 28,221.81 | 84,665.43 |
| 41 | Supply of portable "Insulation Monitor with fault locator kit for Railway signaling and telecommunication (S&T) systems with article ID: I30120001 of M/s Bender India Private Limited make including following. 1. i. ISO 685-D-P Insulation Monitoring Device (IMD) with integrated locating current injector .ii EDS195PM Insulation fault locator iii PSA3052 Measuring clamp 52mm iv PSA3352 Measuring clamp 52mm v EDS195PM Accessories for 1no of USB power supply unit:Primary : 100...240 V, 50...60 Hz Secondary: DC 5 V, +/- 10 %,Power consumption 0.5 W vi iso685-D-P Accessories for 3nos of safety measuring cable black along with clamps and 2nos Safety measuring cable green/yellow along with clamps for system connection and 1no Auxiliary supply cable. 2. 2 days of onsite training will be provided for all 2 locations. (Material Inspected by RITES) | Set | 2.00 | 9,72,243.3 | 19,44,486.6 |
| 42 | Supply of Relay DOC (BR930 automated relay tester & conditioner ).Make MRD Rail Technologies or similar. (Material Inspected by RITES) | Numbers | 2.00 | 7,52,250 | 15,04,500 |
| 43 | Supply of earth electrode assembly as per Drg. No. CR/SK-753. (Material Inspected by Consignee) | Numbers | 45.00 | 1,530.87 | 68,889.15 |
| 44 | Supply of cartridge fuse block made of PBT as per RDSO Drg. No. SA - 23748 Alt. 4 and Spec. No. IRS-75/2006 with latest ammendment. Fuse block shall be suitable for round head type fuses. (Material Inspected by RDSO) | Numbers | 12.00 | 225.71 | 2,708.52 |
| 45 | Supply o f n o n detoriating type l o w voltage cartridge fuse current 4Amp/6Amp i n equal proportion round head type a s per spec No IRS/S/78/92 with latest amendment. (Material Inspected by RDSO) | Numbers | 12.00 | 55.29 | 663.48 |
| 46 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 275V AC/300V DC supply with maximum clamping voltage of 595V at 100A and peak single pulse(8/20us) rating of 8KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 300.00 | 31 | 9,300 |
| 47 | Supply of Metal oxide Varistor(Supply of Metal oxide Varistor(MOV)), 20mm dia, for 11V AC/14V DC supply with maximum clamping voltage of 36V at 20A and peak single pulse(8/20us) rating of 2KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 240.00 | 31 | 7,440 |
| 48 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 25V AC/31V DC supply with maximum clamping voltage of 77V at 20A and peak single pulse(8/20us) rating of 2KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 240.00 | 24 | 5,760 |
| 49 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 40V AC/56V DC supply with maximum clamping voltage of 135V at 20A and peak single pulse(8/20us) rating of 2KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 120.00 | 31 | 3,720 |
| 50 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 50V AC/65V DC supply with maximum clamping voltage of 135V at 100A and peak single pulse(8/20us) rating of 6.5KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 120.00 | 24 | 2,880 |
| 51 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 95V AC/125V DC supply with maximum clamping voltage of 250V at 100A and peak single pulse(8/20us) rating of 6.5KA.(Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 120.00 | 24 | 2,880 |
| 52 | Supply of Metal oxide Varistor(MOV), 20mm dia, for 130V AC/170V DC supply with peak single pulse(8/20us) rating of 8KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 240.00 | 48 | 11,520 |
| 53 | Supply TVS Diode, 1500W peak pulse capability at 10/1000micro-second, Bi- directional, reverse standoff voltage = 8.55V, maximum clamping voltage = 14.5V at 42.1A, maximum reverse leakage current of 10 micro-Amp at 8.55V. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 120.00 | 69 | 8,280 |
| 54 | Supply of Metal oxide Varistor (MOV), 10mm dia, for 25V AC/31V DC supply with maximum clamping voltage of 77V at 5A and peak single pulse(8/20us) rating of 0.5KA. (Bourns/Little fuse/Epcos make or similar). (Material Inspected by Consignee) | Numbers | 120.00 | 18 | 2,160 |
| Schedule total | ₹1,15,57,678.69 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .