ADDN/ALTN AND ROOF WORK OF MD ACCNS AT AKASH NAGAR, PROVN OF HARDSTANDING AT OUTDOOR TRAINING AREA OF RADIO FACULTY OF 7 TETRA SCHOOL 2W, PROVN OF INTERCONNECTING PATH OF 20 SQN AT AFS PUNE UNDER GE AF LOHEGAON

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) as in surface channel, coping etc.

M & L for levelling & ramming,rodding the floors including watering as required to level the surface for sub base complete all as specified and directed.

M & L for cement concrete in sub floors, sub-bases,floors and pavings type D2, 1:4:8 100 mm thick complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

S&F 450x300x6-7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames exc. 1.50 Sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames n exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners included).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per specified and directed. (Note: stainless steel butt hinges and necessary screws shall be paid separately)

S& F stainless steel Butt hinges 100 mm size . Complete all as specified and directed.

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S&F Powder coated aluminium frame/tracks 2/3/4 for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F almunium powder coated louvers concealed type for ventilltor size 0.60 X0.45 having arrangement of 4/6 blades fixed to almunium frame complete all as specified and directed .

S&F almunium powder coated sliding shutter 2/3/4 track aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings complete all as specified and directed .

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI pipe medium grade 25 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S&F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

S&F of 25 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F CP Two way bib tap 15 mm size with wall flange complete all as specified and directed.Cera Cat art No F1020163

S&F of PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete in repair

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

M&L15 mm bore bib tap fancy type fixed in repair for chromium plated cast copper alloy with wall flange complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .

M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M&L Rounding to edge of stone slabs one edge,such as in steps,cooking platform,and other similar situations.

S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

S&F of 600 mm long towel rail of PTMT (minimum weight 190 gram) fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repairs of 125 mm size brass chromium plated shower rose with or with out swivel joint including to steel pipe or union complete all as specified and directed

S&F of 15/20 mm bore brass chromium plated wall mixer with bend pipe for over head shower including to steel pipe or union complete all as specified and directed cat no -F2002401 CERA / jaquare/parryware or its equivalent

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm vitrious china soap dish embeded in wall complete all as specified and directed

S&F rob hook complete all as specified and directed Make - Cat No F5002108 of cera/ jaquare / parryware or its equivalent

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not xc 10 cm girth in stone/concrete/brick walls complete all as specified and directed.

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar

S&F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 75mm dia of PVC (SWR) junction single T equal or unequal all with acess dooras specified and directed.

S&F 110mm dia of PVC (SWR) junction single T equal or unequal all with acess dooras specified and directed.

M&L PVC (SWR) vent cowl of 110mm dia

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC SWR Gully trap of diameter of outlet 75 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius old size bricks built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified directed with using IWPC @ 0.2 ltr per bag of cement or as per manufacturer instruction complete all as specified and directed Note: WPC shall be measured and paid seperately.

M & L for 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed

Supply only integrated liquid waterproofing compound.

M & L for Preparation of newly plastered surfaces/un plastered surfaces and applying two coat of white washing on ceiling complete all specified and directed.

M&L for Preparation of newly plastered surfaces/un plastered surfaces and applying two coat of white washing to walls complete all as specified and directed.

M&L for perparation of new surfaces of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on surfaces of on ceiling /soffits of slabs, chajjas all as specified and as directed at site.

M&L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing to walls all as specified.

M&L for complete removal of old surfaces of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for Providing and carry out waterproofing treatment to wet areas on inside surface after proper surface preparation, carry out cementitious injection grouting at leakage points using Cebex 100-Plasticised expandive grout admixture, treatment of construction joints using polymer modified mortar prepared by using Nitobond SBR Latex-screed modifier cum bonding agent, application of polymer modified vatta at floor-wall junction prepared by using Nitobond SBR Latex, filling pipe cutouts using Conbextra GP2-Nonshrink cementitious grout, application of two coats of Brushbond RFX– Elastomeric Waterproofing coating, allow the same to cure and Application of plaster 7-8 mm thin on top of cured cementitious coating. Final- application of two coats of Nitocote EP 405- Solvent free epoxy resin coating etc. complete including all tools and tackles as per manufacturer’s specification.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontalor sloping and similar work , exc 5cm but not exc.10cm wide complete all as specified and directed.

Use and waste for Form work for fair finished flat surfaces as in soffits of suspeded slabs thickness exc 200mm complete all as specified and directed.

M&L for Mild steel TMT Bars 10mm dia Grade-500D and over cut to length bent to shape required including crancking, bending spirally for hooping and including mild steel wire (annealed) not less than 0.9m dia or securing with clips complete all as specified and directed.

M & L for RCC (Nominal Mix) type B0 1:2:4 with using 12.5 mm graded stone aggregate as in slab supported on wall complete all as specifed and directed.

Supply and applying nitto bond chemical as per manufacture instruction over demolished surface of old concrete complete all as specified

Taking down existing water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed.

M&L 40mm thick Providing, cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as levelling course as finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L for 10 mm thick rendering on fair faces of brick works on wall / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed ( With using WPC of 3% of Cement Weight. Note:-WPC shall be measured and paid seperately.

Preparation of surface and applying two coats of hot bitumen blown 85/25 to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed.

M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed.

M & L for two coat of aluminium paint above the new untreated APP membrane complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying one coat of white wash to walls to obtain uniform surface including making good the surface complete all as specified and directed.

- ditto - all as per item No. 86 above but on ceilings complete all as specified and directed.

- ditto - all as per item No. 86 above but two coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications, all as specified and directed.

Complete removal of existing treatment and Washing, rubbing down and stopping of distempered and painted surfaces applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for 3mm thick wall care putty on wall all as specified and directed by Engr in Charge.

Preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type C-2 (using 20mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 20 to 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement & pigment

M&L 25mm thick Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation

M&L 75 thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) laying as in Sub base as directed

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil.

Demolition and breaking up drain pipes, 150mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

M&L for Reinforced concrete 150mm dia pipes, class NP2, laid in treches & jointed in cm 1:1 complete with collars

M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:4:8 type D2 including packing under and haunching against the sides of pipes after they are laid and tested in.

M&L for returning, filling incl spreading levelling watering and well ramming in layers n.exc 25 cm as in soft/loose soil.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

M&L for 165mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for Providing, cement concrete type B0, 1:3:6 (12.5 mm graded aggregate)for chawkat filling as required all as specified and directed.

M&L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M&L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S&F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S&F of 125mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F 300 mm long MS sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

M/L for 18 MM thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type,vennered with both faces fixed with screws to timber and nails for storage almirah to the size and as directed.

Preparation of new surfaces of wood and wood based surfaces and applying two coat of synthetic enamel paint over one coar of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S&F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S&F in repairs for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S&F in repair ms Mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F 4.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq mtr in each pane complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste pipe and coupling and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F stainless steel kitchen plate rack of 0.65 mm thick of approved make with plugs, washers, over all size 750mm x 600m complete all as specified and directed.

S&F Harrison rail 20 mm Dia(Curtain rod)s, of anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with grey cement & pigment

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete.

Surface dressing nexc 15cm deep for soft/loose soil etc complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40mm graded agg) as in foundation complete all as specifie and directed.

Providing cement concrete type B1 1:2:4 (using 20mm graded agg) as in coping kneelers, apex stone, bed plates, kerb as directed.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, MS round bars, flat iron fillets (for securing the wire).

M&L 50mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) as in flooring, surface even and smooth without using extra cement complete all as specified and as directed

S&F glass dividing strips, 3mm thick and 38mm width etc complete all as specified and directed.

Parmanand Enterprises (BID ID -3487051)

Smruti Construction (BID ID -3486139)

S.R.M.K Enterprises (BID ID -3492338)

tulsani associates (BID ID -3486611)

Shri Sant Cosntruction (BID ID -3484022)

ShreHari Civil Enginneering and Contractors (BID ID -3486914)

SHREESAMARTH CONSTRUCTION (BID ID -3490816)

shrilaxminarayan constructions (BID ID -3492206)