Construction of additional block for Boys hostel, additional block for Girls Hostel and Academic Block in Veterinary College and Research Institute, Tirunelveli.

Amount

Civil Works

Cleaning Juliflora Jungle without Uprooting for Clearing the site around the proposed building and making approach road to the site, etc. complete.

Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers within an initial lead and lift and clearing, levelling the site etc., complete complying with standard specifications.

Supplying and filling in foundation and basement with filling stone dust in layers of not more than 15cm.thick well rammed watered and compacted etc. complete complying with standard specification.

Plain Cement Concrete 1:5:10 (One Cement, five M.sand and ten aggregate) using 40 mm size hard broken granite stone jelly for foundation and flooring including dewatering wherever found necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Providing plain cement concrete 1:2:4(one cement, two M.Sand and four aggregate) using HBG jelly of size 20mm gauge for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Refilling in foundation, basement, etc with excavaed earth in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the Engineer,i/c..,

Supplying and filling in Foundation and basement and trenches etc., with well Gravel in layers of not more than 15cm thick well rammed watered and well consolidated etc., complete complying with standard specifications and as directed by the Engineer,i/c.,

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. The work should be carried out by an approved and registered specialist pest control agency only. Tenderer to furnish the name of the proposed specialist firm. A 10 years post application guarantee against defects shall be furnished by the main Contractor. Note : Horizontal plan area at ground floor level of the building will be measured and paid.

Supplying and erecting steel shuttering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grade beam, and stair case steps, etc. Which require only normal strutting using M.S.sheets of size 90cmx60cm 10 gauge, stiffened with mild steel angles of size 25mm x25mm x 3mm for boarding supported by silver oak joists of size 10cm x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc. complying with standard specification. (The payment for centering will be made only after the concrete is laid).

Supplying and erecting steel centering for sides and soffits including supports and strutting up to a height of 3.29m meter for plain surfaces such as RCC slabs, beams TEE or ELL beams, lintels staircases beams etc., with all cross bracings using mild steel B.G. 10 sheets of size 90cm X 60cm stiffened with welded mild steel angles of size 25mm X 25mm X 3mm laid over silver oak (Country wood) joists of size 10cm X 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre etc., complete complying with standard specification in all floors.

Supplying and erecting steel centering for sides and soffits including supports and strutting up to 3.29 meter height for plain surfaces such as RCC square or rectangular columns, top and bottom slabs of sunshade boxing sill slabs etc., with necessary facia etc., with all cross bracings using mild steel B.G., 10 sheets of size 90cm X 60cm stiffened with welded mild steel angles of size 25mm X 25mm X 3mm for boarding laid over silver oak (Country wood) Joists of size 10cm X 6.5 cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification.

Reinforced Cement Concrete 1:11/2:3 (One Cement, one and half M.sand and three hard broken stone jelly) using machine broken 20 mm gauge hard broken granite stone jelly for all RCC item of works excluding cost of reinforcement grill, fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc., complete and providing fixtures like fan clamps in the RCC floor/roof slab wherever necessary and bearing surfaces of wall, beam etc. shall be finished smooth with cement mortar 1:3 (One Cement and Three P.Sand) 12mm thick and kraft paper laid over it without claiming extra, etc., complete complying with standard specification as directed by the departmental officers. For foundation and basement

For superstructure in Ground floor

For superstructure in first floor

For superstructure in second floor

Supplying, fabricating and placing in position of steel reinforcements using MS / RTS rods for all RCC works as per design given including cost of steel. Binding wire, straightening the rods, welding of rods, dia above 25mm in all floors complying with standard specifications. [The welding should conform to BIS. Wherever required at contractor’s expense.]

Brick work in Cement Mortar 1:5 (One cement and Five M.sand) using second class ground moulded chamber burnt bricks of size 9”x 4½”x 3” for the following including curing, etc., complete complying with standard specification For foundation and basement

Brick work in Cement Mortar 1:6 (One cement and six M.sand) using second class ground moulded chamber burnt bricks of size 9”x 4½”x 3” for the following including curing, etc., complete complying with standard specification For superstructure in Ground floor

For superstructure in first floor

For superstructure in second floor

Providing brick partition wall of 11.50 cm thick using best quality second class ground moulded chamber burnt bricks of size 9” X 4 ½” X 3” in cement mortar 1:3 (One cement and three M.sand) including supply and fixing hoop iron reinforcement if considered necessary by the departmental officers as directed etc., complete complying with standard specifications. (The hoop reinforcement will be measured and paid separately). For superstructure in Ground floor

For superstructure in first floor

Plastering of walls in cement mortar 1:5 (One cement and five P.sand) 12mm thick in all floors including provision of cement mortar bands and raised plastering for doorways wherever required and as directed without any extra claim complying with standard specification.

Special ceiling plastering and finishing the RCC exposed surface such as RCC slabs sunshade facia, canopy slab, stair case, waist slab, landing slab etc., with cement mortar 1:3 (One cement and three P.sand) 10mm thick including hacking and providing necessary cement mortar nosing, beading etc., wherever necessary and as directed with cement mortar etc., complete complying with standard specification

Paving the floor with Designed Colour double charged Vitrified tiles of size 60 x 60 x 8mm in all floors over a base layer of Cement Mortar 1:3 (One cement and three M.sand) 20mm thick and pointed with white cement mixed with colouring pigments at the rate of 0.3 Kg/sq.m including finishing neatly and curing, etc. complete, complying with standard specification and as directed by the departmental officers. (The basic cost of tiles should not be less than Rs.80/-- Sq.ft)

Flooring with the Eurocon tiles of size 20mm thick laid over cement mortar 1:3 (One cement and three M.Sand) 20mm thick and pointing the joints to full depth of slabs with cement mortar 1:3 (one cement and three M.Sand ) mixed with colour oxide including laying, finishing, polishing with machine polish, curing etc., complete complying with standard specification

Paving the floor with Designed Colour Ceramic joint free tiles of size 300x300x 6mm in all floors over a base layer of Cement Mortar 1:3 (One cement and three M.Sand) 20mm thick and pointed with white cement mixed with colouring pigments at the rate of 0.3 Kg/sq.m including finishing neatly and curing, etc. complete, complying with standard specification and as directed by the departmental officers.

Dadooing the wall with glazed tiles of size 30cmx45cm of approved colour and quality with base plastering of cement mortar 1:3 [One cement and three M.Sand] 12mm thick, pointed with coloured cement to match the colour of the tiles finishing neatly etc., complete.

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first class quality and approved colour over a priming coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost of distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges etc as per standard specification. (The colour and shade of the distemper shall be got approved by the Engineer,i/c., before use of work).

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer,i/c., before use on works).

Providing and fixing doors with door frames as per the design and details with the door frame made of well seasoned good quality teak wood frame size of 125mmX100mm finished with melamine polish of approved make, colour & pattern as per drawing and the door made of 35mm thick flush door shutters of solid core block board type bonded with phenol formaldehyde synthetic resin thermo pressed with 8mm thick teak wood external edge lipping finished with melamine polish of approved make, colour & pattern as per drawing. The construction procedure of the shutter should be as per IS:2202.The size of block, shall perfectly correspond to the maximum size of lock, covered in IS:2209.All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc. The rate shall inclusive of supplying and fixing 6 nos of MS holdfasts of size 230x50x6mm MS flats suitably folded to the rejoined ‘Z’ shape to have two end flats 50mm long and over all length of the horizontal position as 230mm and including making necessary groove in the two end flats to accommodate screws, and the following of hinges and other hardwares; complete as directed by the Engineer in charge. for Double Leafs doors:- 1) SS 304 ball bearing butt Hinges of size 125x63x3mm - 6 Nos. 2) D type Handle 300 x 25mm in SS 304 - 2 nos 3) SS 304 Tower bolt 12mm dia 300x38x2.4mm – 2nos 4) Mortise dead lock with Europro file Cylinder 60mm Length (one side key other side thumb turn) with 4 level Master Key - 1 no for Single Leafs doors:- 1) SS 304 ball bearing butt Hinges of size 125x63x3mm - 3 Nos. 2) D type Handle 300 x 19mm in SS 304 - 1 nos 3) SS 304 Tower bolt 12mm dia 300 x 38 x 2.4mm – 2nos 4) Mortise lock with D type Handle Profile with 4 level Master Key - 1 no 5) cam action door closer - 1 nos specification same as above but the finishing of door shutters on both sides with 3.5mm thick veneer of approved color and finishing with melamine polish. The basic cost of veneer. The rate should be quoted for single side area of the door shutter - Single leaf

specification same as above but the finishing of door shutters on both sides with 3.5mm thick veneer of approved color and finishing with melamine polish. The basic cost of veneer. The rate should be quoted for single side area of the door shutter - Double leaf

Providing and fixing in position first quality teak wood beading / architrave of finished size as given below, made to shape and pattern approved with necessary pins, nails, screws, bolts using teakwood conforming to specification. Rate shall include two coats of Duco Paint over a coat of wood primer etc. as directed.

Supplying, fabricating and fixing in position standard pristine white U-PVC (Un-Plasticized Polyvinyl Chloride) partly fixed and partly sliding windows as per the design and drawings and making necessary opening for the exhaust fan fixing in all floors with extruded upvc sections of required sizes as per IS Standard with necessary accessories such as rubber beedings with best quality rubber, lock, handle, supplying and fixing 4mm thick plain / frosted glass including the cost of all materials, labour, power consumption required for the fabrication, drilling holes in RCC columns, floor, masonry wall wherever necessary with power drills to the required extent and making good to the original condition after fixing etc., and as directed by the Engineer-in-charge.

UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) doors the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI / 1mm 125 GSM and 100% corrosion free, the profiles are multi-chambered sections with all thick of 2mm. The FPDM rubber covered with over all the edges of frame and shutter the shutter will be provided with ESPAG multi power point locks and also handle to be provided. The corners and joints should be welded and cleaned. Strong locking systems and as per size for arresting noise and energy loss. The door should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The door should be got approved from the Executive Engineers before use on work.

Supplying and fixing of double side pre-polished Cudappah slab for Cupboards, racks, platform in all floors including the cost of cement mortar, curing etc., complete complying with standard specification.25mm to 30mm thick

Supplying and fixing of cupboard shutter using new wood alround frame and shutter are using with 3/4" thick new wood, with all accessories with hinges handle , locks and polishing etc , complete complying with standard specification,. The Rate including all material, labour charges, transportation charges etc.,

Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and fixing 50mm dia (2mm min thickness), MS tube hand rails with balustrade and horizontal rails as per design and drawings including floor flange ,anchor plate, grouting, welding and grinding etc., Running length of mild steel hand rail will only be measured for payment)

Fabricating, supplying & fixing in position Structural glazing, Strip Windows to external faces of the building either straight or curved in plan consisting of panel work of verticals and horizontals made out of specially designed extruded colour anodised aluminium sections anchored to RCC/STEEL elements through hot dipped GI clamps. Single glazed panels of 6mm thick toughened heat strengthened 6mm SCG COOL-LITE Graphite good quality. spandrel in-fills of 6mm thick GREY toughened tinted glass. The single glazed glass panels shall then be securely bonded to frame work with structural sealant to ensure absolute water tightness, spandrel infill's with insulation backing (50mm thk semi rigid black faced mineral wool at density of 60kg/cum Galva bond backing) and a backing of 12mm thk gypsum board or equivalent fixed to frame work with suitable angles,brackets,fasteners,etc. as per the manufacturer's detail including approved structural sealants,EPDm gaskets, fixing and other accessories and all incidental work complete as per drawings etc. complete to the satisfaction of the TANUVAS officials .Rate shall include the fire dampers in vapour cured GI sheet formed

Providing expansion joint in RCC floor slab for 25 mm width using polysulphide as sealant on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealant with necessary spatula etc., complete complying with standard specifications and as directed

Providing expansion joint of 25 mm wide in between RCC twin columns from top of pedestal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealants for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.

Weathering course concrete using best quality broken brick jelly of size of 20mm uniform gauge in pure slaked lime (No M.Sand to be used) over the RCC roof slab, the proportion of brick jelly to lime being 31:12.5 by volume laid over in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden of beaters of approved pattern, keeping the surface constantly wet by sprinkling water, etc. complete as directed by the Engineer-in-charge. For First Floor

Finishing the top .of roof with one course of MACHINE PRESSED TILES of size 230mmx230mmx20mm of approved quality laid in cement mortar 1:3 (one cement and three M.Sand) 12mm thick mixed with water proofing compound conforming and the top pointed with the same water proofing compound and red oxide, etc., Complete complying with standard specifications and as directed.

Supplying and fixing in position best approved ISI quality PVC Rain water down fall pipes of 110mm dia meter having working pressure of 4Kg/Cm2 including cost of PVC pipe, with necessary shoes, bends, nails, teakwood plugs, screws etc., and fixing of cost iron gratings of required dia meter and special clamps at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The size of teakwood plugs to be used shall be 150mm X 25mm in front and 200mm X 75mm in rear and all other sides to a depth of 100mm. The PVC pipe shall be fixed with teak wood plugs by means of “U” clamps using brass screws. Special types of “U” clamp at the centre of the pipeline shall be fixed in addition to those for more than 3 meter pipe length complying with standard specifications.

Supplying and fixing in position by means of 75 mm long and 65 mm dia counter sunk bolt and nuts embedded in the floor with rubber or fiber washer white glazed European Water Closet white colour with 100 mm "P" trap with double flapped rigid PVC black seat and seat cover with C.P. brass hinges including supply and fixing 10 litres capacity PVC low level flushing tank with a pair of C.I. brackets, etc., complete with all fittings such as 15 mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40 mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15 mm brass connections, 15 mm G.M. wheel valve, 15 mm brass nipple (2 Nos.), 15 mm nylon connection and fixing the low level ISI marked flushing tank with T.W. plugs and screws and giving necessary connection to the CI / PVC pipe including cost of 600 mm length of 100 mm dia C.I. Pipe and painting the C.I. Brackets with 2 coats of approved paint over one coat of red oxide primer and redoing the dismantled masonry to original condition etc. complete. (The EWC and flushing tank should be got approved by the Executive Engineer before use on works: Make: Parry ware / Hind ware or its equivalent))

Supplying and fixing in position CP two way Bibcock with Health faucet of best approved quality and approved make etc., complete complying with standard specification and as directed by the Engineer,i/c.,

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with M.Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of M.Sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to PVCsoil pipes including cost of 100mm dia PVC pipes for a length of 600mm by dismantling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental Officers.( The water closet should be got approved by the Departmental Engineer before use on work)(Make :Parry ware / Hind ware or its equivalent)

Supplying and fixing in position best quality and approved make Indian made white glazed earthenware wash hand basin of size 550 x 400 mm white colour of approved brand and quality including cost of cast iron brackets 15 mm dia brass CP pillar tap, 32 mm dia "B" class G.I. waste pipe 32 mm dia C.P. brass waste coupling with rubber plug and chain 15 mm brass nipple 15 mm dia nylon connection including fixing of wash basin in the wall in position with a pair of CI brackets with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc. complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Departmental Officer before use on works).)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best approved quality of size 430mm x 260mm x 350mm with GI pipe connection, PVC waste pipe fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory if necessary and re-doing the same to the original condition as directed complying with standard specifications.

Supplying and fixing in position of white marble slab (Adanga) of 20mm thick for urinal partition and fixing the marble slab with cement mortar 1:3 of 12mm thick etc., complete complying with standard specification.

Supplying and fixing in position of ½” dia 2 in 1 / C.P. wall mixer unit of approved make and quality (Jaguar / equivalent) including cost of cutting threading of pipes and fixing the GI pipe in position with white led, spun yarn etc., complete complying with standard specifications. (The C.P. wall mixer unit to be used on work should be got approved by the Engineer,i/c., before use on work)

Supplying and fixing in position best quality brass chromium plated towel rail of 600mm length 20mm dia with CP brackets of same materials including fixing with necessary T.W. plugs, brass C.P. screws and dismantling masonry etc., complete with standard specifications. (The towel rail should be got approved by the Departmental officer before use on works).

Supplying and fixing in position 15 mm dia C.P. long body tap (Heavy type) of approved make conforming to IS specification and quality including cost of shellac, thread, etc., complete, complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Departmental Officer before use on the works)

Supplying and fixing in position 15mm dia C.P. screw down tap (Heavy duty) of best approved make and quality including cutting, threading, G.I. pipes wherever necessary and fixing to the galvanized iron pipes in position etc., complete complying with standard specification (Tap to be used on works should be got approved by the Engineer,i/c., before use on work).

Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493.Cost shall be inclusive of (a)Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required or (b) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. 15mm dia CPVC pipe

20mm dia CPVC pipe With ISI Mark

25mm dia CPVC pipe With ISI Mark

32mm dia CPVC pipe With ISI Mark

Supplying, laying and jointing UPVC pipe of the following dia of approved quality and best variety and laid properly to alignment including fixing the required specials lent excluding cost of such specials but including cutting, threading and fixing to the wall with necessary clamps, screws, teak wood plugs making holes in the wall (or) drilling holes in the roof and making good the disturbed portion to the original condition with necessary brick work and plastering etc., complete complying with standard specifications. (The UPVC pipe should got approved by the Engineer,i/c., before use on work). 40mm dia UPVC pipe With ISI Mark

50mm dia UPVC pipe With ISI Mark

65mm dia UPVC pipe With ISI Mark

Supplying and fixing in position best Indian make PVC soil waste pipes of approved make and quality with working pressure of 6 Kg/Cm2 of the following diameter and providing leak proof joints with PVC adhesive resin etc., including fixing to the walls wherever necessary with teak wood plugs, mild steel clamps, brass screws etc., and giving connection to the sanitary fittings including dismantling masonry (or) RCC works (or) flooring wherever found necessary and making good the dismantled portion to the original condition and the pipes shall be fixed in position true to alignment complying with standard specification and as directed by the departmental officers. 75mm dia PVC pipe With ISI Mark

110mm dia PVC pipe With ISI Mark

Providing and fixing in position 100mm PVC .Multi inlet Floor traps with CP grating, joining, embedding in concrete etc. complete rate to include making of opening in floor, marble / tiles, for fixing grating. Size 150 mm x 150 mm

Designing and constructing brick masonry inspection chamber of size 0.60 x 0.60 X 0.90cm by using best quality second class ground moulded chamber burnt bricks of size 9" x 41/2" x 3" in cement mortar 1:5 (One cement and five fine M.Sand), R.C.C. top slab with 1:2:4 mix (One cement, two M.Sand and four hard broken stone jelly using 20mm. nominal size) embedded with frame for manhole, RCC foundation slab. 1:2:4 mix (1 cement : 2 coarse M.Sand:4 graded stone aggregate 40 mm nominal size) both inside and outside of plastering with cement mortar 1:5 (One cement and Five P.sand) 12 mm thick with cement motor 1:3 (1 cement : 3 P.Sand) with a floating coat of neat cement on inside face, proper water proofing to ensure no ground water seepage in the manhole, Poly propylene (conforming to ASTMD - 4101) foot rests (meeting the 224 kg load requirement as per IS 5455) at 300 mm spacing, benching and making channels with 1:2:4 cement concrete neatly finished, including necessary centering and shuttering, reinforcement, excavation, in all kind of soil, dewatering, refilling, watering, ramming and removing the surplus excavated earth, making good the same complete as required. 60 x 60 x 90 cm of inner dimension

Providing rain water harvesting pit by earth work excavation in circular shape of 90 cm dia at 100 cm depth. The pit is encased with well ring of 90 cm dia , 30 cm depth, 50 mm thick using RCC 1:2:4 using 20 mm metal for 4 nos. The entire depth ie. 120 cm is filled with 40 mm size metal. The top of the pit is covered with RCC 1:2:4 50mm thick perforated slab including cost and fabrication of reinforcement grills for ring and cover slab, labour charges, cost of materials, moulding curing, finishing and fixing in position etc. complete.

Supplying and fixing in position the following UPVC specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and pipes jointing the special complete complying with standard specifications. (The PVC specials used on the work shall be got approved by the departmental officer before use on work).50mm dia UPVC Elbow With ISI Mark

40mm dia UPVC Elbow With ISI Mark

50mm dia UPVC Tee With ISI Mark

40mm dia UPVC Tee With ISI Mark

50mm dia UPVC Coupler With ISI Mark

40mm dia UPVC Coupler With ISI Mark

Supplying and fixing in position CPVC specials such as plain bend, door bend, plain tee, door tee, off sets of various sizes of best approved quality conforming to ISI and providing leak proof joint including fixing to wall etc., complete complying with standard specification. (The specials should be got approved by the Engineer,i/c., before use on work). 32mm dia CPVC Elbow With ISI Mark

25mm dia CPVC Elbow With ISI Mark

20mm dia CPVC Elbow With ISI Mark

15mm dia CPVC Elbow With ISI Mark

32mm dia CPVC Tee With ISI Mark

25mm dia CPVC Tee

20mm dia CPVC Tee

15mm dia CPVC Tee

32mm dia CPVC Coupling

25mm dia CPVC Coupling

20mm dia CPVC Coupling

15mm dia CPVC Coupling

32mm dia CPVC Union

25mm dia CPVC Union

20mm dia CPVC Union

15mm dia CPVC Union

Supplying and fixing in position PVC specials such as plain bend, door bend, plain tee, door tee, off sets of various sizes of best approved quality conforming to ISI and providing leak proof joint including fixing to wall etc., complete complying with standard specification. (The specials should be got approved by the Engineer,i/c., before use on work). 4" dia PVC Door bend With ISI Mark

4" dia PVC Plain bend With ISI Mark

4" dia PVC Door Tee With ISI Mark

4" dia PVC Plain Tee

4" dia PVC Plain Elbow Tee

4" dia PVC Door Y

3" dia PVC Door bend

3" dia PVC Plain bend

3" dia PVC Door Tee

3" dia PVC Plain Tee

3" dia PVC Door Y

Supplying and fixing in position first quality and approved variety of Gun metal Gate valve and wheel valve with ISI make of the following size. (The specials should be got approved by the Departmental Officer before use on work). 50mm dia Gate valve With ISI Mark

40mm dia Gate valvae With ISI Mark

32mm dia Gate valve With ISI Mark

25mm dia Gate valve With ISI Mark

20mm dia Gate valve With ISI Mark

15mm dia Gate valve With ISI Mark

Supplying and fixing in position best approved quality C.P. brass soap tray of size 150 x 150 mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing in position Indian make decorative type wooden framed Mirror of approved quality and brand of size 600 x 450 mm x 5.5 mm shelf type with necessary ply wood backing, rubber buttons, brass CP screws, T.W. plugs etc. complete complying with standard specification. (The mirror should be got approved by the Departmental Officer before use on woks)

Providing Granolithic floor finish for 25mm thickness with plain Cement Concrete 1:2:4 (One cement, two M.Sand, and four stone jelly) using 10 mm to 12 mm hard broken stone jelly and the top surface shall be rubbed smooth in all floors, finishing, threading and curing etc., complete complying with standard specification.

Cement Concrete 1:3:6 (One Cement, three M.Sand and six hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Manufacturing supplying and fixing of STEEL DOOR with following section. Outer frame 40 X 40 X 6mm Hollow steel special extruded section at 3.28Kg/RM and shutter frame 35 X 35 X 6mm hollow steel special extruded section at 3.28Kg/RM. Stiffeners with 32 X 6mm at 1.5 Kg/m MS flat is provided as the lock rail of the door and welded in fact on both ends to shutter frame. 20 gauge CR sheets of best quality is laid as panel in the shutters frames. 18X5mm at 0.7 Kg/m MS flat is welded over the 32X6mm at 1.50 Kg/m MS that on the rear side of the sand witching the CR sheet for rigidly. Additional stiffness with 18 X 5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter 2 Nos., of hinges in case of single leaf and 4 Nos., of hinges in case of double leaf shutter is provided 6 Nos., of hold fasts 120mm length spliced at the ends are welded to the outer frames of the door. Tower bolt 2 Nos., one at top and the other at bottom are provided. One aldrop is provided in case of double leaf door at lock rail section in the door. For single leaf doors one more aldrop is provided in the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at in appropriate place, in case of a double leaf door, MS flat 32 X 3mm at 1.10 Kg/m is provided on the edge of one shutter, to conceal the gap between the shutters. A tic bat is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given a shop coat of red oxide primer etc., as directed by the departmental officers. The rate is include cost of all materials, labour charges, transportation, taxes and all other incidental charges etc., complete.

Providing and laying in position 300m dia RCC humepipes(NP2) of approved quality and make including collars., necessary excavation and refilling with earth , compaction and making good the level alignment etc., complete as directed by the departmental officers.

Supplying and filling 40mm broken brick jelly for septic tank dispersion trench filling including laying, spreading etc., complete with standard specification and as directed by the Engineer,i/c.,

Random Rubble masonry in cement mortar 1:5 (One cement and five M.Sand) mix for foundation using hard granite rough stone and pointed with same mortar etc., complete complying with standard specification. For Foundation and basement

For super structure in Ground floor

Glass coping on the top of the compound wall with Cement Mortar 1:3 (One cement and Three M.Sand), 20mm thick using M.Sand including fixing with broken glass pieces with necessary scaffolding fixing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting of 5000 litre capacity PVC Sintex water tank to ISI standard of approved quality and make including labour charges for fixing etc. complete.

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers. (For Academic Block)

Bidder Name

SRI NAACHIMAAR ENGINEERING CONSTRUCTIONS