Renovation of 9 Nos parks of Sector-9 Ward no. 14 Zone 1 MCG.

Amount

Good Earth for filling un-even land [HSR 3.1.2 plus 17.8.2 plus 17.8.3]

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2”, ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame and vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing and m.s flat 6mm thick housing with suitable PU Primer and PU Paints. Complete item with GST, Transportation and installation at site

-Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) `C` Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C` Class. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the Each NSADRate 5.00 32,400.00 162,000.00 Work Name Work Code Sub Division Estimate Amount Lumpsum Amount Total Amount Renovation and Beautification of 10 Nos Parks of Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1 MCG GUR01220210412230 155 Gurgaon 17414401.22 0.00 17414401.22 equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation

Horse Rider and Air Swing1. Dimensions (LxWxH) 1500 x 900 x 1100mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Horse Rider main frame of NB 65mm (G.I) `C` Class pipe Handle support frame of NB 50mm and other pipes of NB 32mm and NB 25mm (G.I) `C` Class pipe. 4. Air Swing leg support frame of NB 50mm (G.I) `C` Class pipe, Handle support frame of NB 32mm and NB 25mm (G.I) `C` Class pipe (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 9. Foothold for Horse Rider made of NB 32mm (G.I) `C` Class Pipe 10. Foothold for air swing made of MS Sheet Metal with rounded edge to percent impact and injury. Each NSADRate 5.00 32,400.00 162,000.00 11. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts made of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are including of all taxes like GST. transportation and installation at site of work to full satisfaction of Engineer in charge.

Providing and fixing of designer Victorian steel sitting Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and Back rest 59” long total 12 Nos, is of MS rectangular pipe 65*25mm*14 Gauge complete with Epoxy Primer (INTERSEAL 670 HS) and PU finish (INTERTHANE 990) paints and INTERTHANE 1027 clear coat make Akzo Nobel India Ltd. (Protective coating Division) approx. weight of each Bench is 83 KG. The bench should have designer shade of different picture or design as approved by engineer in charge The rates are inclusive of all taxes like GST, transportation and Installation complete in all respect to full satisfaction of engineer-in-charge.

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

Providing and fixing public information board consisting of 75 mm G.I. Pipe of size 2.45 metre x 1.15 metre with 900 mm x 900 mm G.I. Sheet 16 gauge connected/welded with 5 mm thick steel plate of 50 mm duly painted as per column mention in drawing and fixing at site in 60 x 60 x 75 cms cement concrete in 1:2:4 block complete in all respect

sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guage sittibg planks is of pipes and handle seats 4 nos. molded frp material

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mmb make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge and m.s rectangular pipe

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd. (GSTN-06AAPCS4484A1Z9) BID ID -859637

CROSS ROAD BUILDCON PRIVATE LIMITED(GSTN-NA)--859767

M/s Lakshay and Company(GSTN-NA)--858801

The Ridhi Sidhi Co-op L&C Society Ltd(GSTN-NA)--858282

Sat Parkash Contractor(GSTN-NA)--859608

CROSS ROAD BUILDCON PRIVATE LIMITED

The Ridhi Sidhi Co-op L&C Society Ltd

Sat Parkash Contractor

M/s Sami Greenmax Landscape Pvt. Ltd.

The Ridhi Sidhi Co-op L&C Society Ltd

M/s Lakshay and Company

CROSS ROAD BUILDCON PRIVATE LIMITED

M/s Sami Greenmax Landscape Pvt. Ltd.