CERTAIN SPECIAL REPAIR, REVENUE WORKS AND MINOR WORKS AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Taking down chowkhats or frames with shutter without taking off shutter from the frame not exceeding 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkhats or frames with shutter without taking off shutter from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc and removing unserviceable material exceeding 100 mtr complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or ground level) and removing unserviceable material exceeding 100 mtr complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints, hacking for key scrubbing with water etc complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

Description same as per Ser item No 11.00 here-in-before but except bricks complete all as specified and as directed.

S&F pressed steel frames for door (Factory made) out of 1.25mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, size of frame 125 X 60mm including bottom of each chowkhat to be welded with 2 No's 25 X 25 X 3mm thick flat iron projecting 10cm on either side and back fill to chowkhats with PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) including one shop coat of red oxide primer complete all as specified and directed. Note: - PCC 1:3:6 type C-0 as in backfill will be paid separately.

S&F for 30mm thick 1st class hard wood plain framed, panelled shutter (two panel) of factory made with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkat complete all as specified and as directed.

S&F for 35mm thick 1st class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass / wire gauges etc without sash bars but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass / wire mesh etc sizes of member as per clause 8.20 (a) of SSR Part - I for door shutter complete all as specified and directed.

S&F Aluminium handle cast type, anodised size 150mm long, 'D' type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100mm long mild steel tower bolt 02 No's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on Drgs No CEPZTD-324/07 Sh 1/3 to 3/3. Note: - The quoted rate shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surfaces. (ii) 4 No's MS steel lugs made of 20 X 5mm iron flat 200mm long. (iii) 10mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping, apex stones, bed plates, PCC padding, benching with minimum thickness of 50mm at the lower end and laid in slope 1:30 and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. Note: - Form work required for these items included in the unit rate of this item.

S&F 3mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc to wooden surfaces as in square exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of wall complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement).

M&L for rendering 10mm thick cement plaster in cement mortar (1:4) on fair face of brick work or concrete surfaces of wall complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement).

M&L for preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint including a coat of pink primer complete all as specified and as directed.

M&L for two coats of oil bound distemper of wall to newly plastered surfaces including preparation of surfaces with wall putty and cement primer complete all as specified and as directed.

M&L for one coat of oil bound distemper to old treated surfaces including preparation of surfaces with wall putty and cement primer complete all as specified and as directed.

S&F 4mm thick of size 605 X 605mm, white pre-premiered, self embossed, Reinforced designer board for false ceiling confirming to IS-14862 and ISO-8336:1993 as per specification under mentioned: - (i) GI section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange, 33mm thick powdered coated main tee 38 (Web) X 24mm flange 0.33mm thick, wall angle screwed fixed to brick wall / partition wall/ concrete / RCC with the help of nylon sleeves and screws @ 610mm C/C, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm C/C in both directions. Suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any, complete all as specified and as directed by Engr-in-Charge.

S&F for structural steel works of Fe-410W (Gde E 250) quality 'A', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including painted one shop coat of zinc chromate / red oxide primer paint (including preparation of surface) before fabrication complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 22.5cm and not exceeding 30cm long, diameter of neck 16mm to 20mm complete all as specified and as directed. Make: - confirming to IS.

M&L for two coats of synthetic enamel paint tint over primer as red oxide, zinc chrome after preparation of new surfaces of steel of any description, over 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over and including cement screed base 20mm thick in cement mortar 1:6, over and including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish over complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering of 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and as directed.

M&L 750mm wide, 50mm thick PCC 1:2:4 laid to an outward slope of not less than 1:12, cast in panels not exceeding 2.0 sqm areas with 6mm wide joints. The joint shall be filled with mastic fillings and 10mm wide joints between the walls and plinth protection shall be filled with mastic filling complete all as specified and as directed.

M&L for two coats of cement based paint including preparation to new surfaces of walls including primer complete all as specified and as directed by Engr-in-Charge.

M&L preparation of old plastered surfaces including filling of small holes etc and applying one coat of cement based paint complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel drapery rods of 25mm dia complete with coloured conical end balls at both end, dia not less than 50mm and fitted with and including MS bracket size 150mm made to shape of 75mmdia MS end wall to wall round block made to shape in male and female pieces as required at site complete all as specified and as directed.

Design Mix M-25 RCC (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span as in lintel band complete all as specified and as directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs not exceeding 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L mild steel TMT 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of PVC, cast iron 100mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Dismantling of PVC, cast iron 75mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Taking down GI tubing of 15mm dia and connection and including cleaning for refixing or removal complete all as specified and as directed.

Taking down GI tubing of 20mm dia and connection and including cleaning for refixing or removal complete all as specified and as directed.

Dismantling of water storage tank of any type or description PVC exceeding 250 and not exceeding 500 ltrs capacity and removing from site complete all as specified and as directed.

Taking out the roots of trees / shrubs of any girth from the surface of buildings and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or brick work in CM 1:4 and finally finishing the surfaces to match with the existing surfaces complete all as specified and as directed.

S&F pressed steel frames for door (Factory made) out of 1.25mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, size of frame 105 X 60mm including bottom of each chowkhat to be welded with 2 No's 25 X 25 X 3mm thick flat iron projecting 10cm on either side and back fill to chowkhats with PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) including one shop coat of red oxide primer complete all as specified and directed. Note: - PCC 1:3:6 type C-0 as in backfill will be paid separately.

M&L cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in backfill of pressed steel door frames complete all as specified and as directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F solid PVC frame for cupboard of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom , panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F 35mm thick 2nd class HW rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge.

M&L for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cupboard shutters / shelves / pelmet box including teak wood beading all around complete all as specified and as directed.

S&F 3.0 mm thick figured glass, pin headed / frosted head type and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanised with staples including one coat of red oxide primer complete all as specified and as directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and as directed.

S&F 100mm long hasp and staple, aluminium anodised with bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F aluminium tower bolt of size 150mm complete all as specified and directed.

S&F MS butt hinges 50mm long medium weight cold rolled complete all as specified and directed.

S&F Mild steel helical / ordinary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding complete all as specified and as directed. (ISI marked)

S&F small fittings 1st class hard wood such as brackets of any types latch and hinges blocks shaped door and window stops and the like, not exceeding 200 cu. cm. each complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L Glazed ceramic coloured tiles 300 X 450 X 7 to 8mm thick on vertical surfaces as in skirting, dado, set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over 10mm thick screed in CM 1:4 including taking down old plaster complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square / Rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors, over 15mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white / coloured cement to match complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square / Rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, over 15mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white / coloured cement to match complete all as specified and directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in tapes, jambs, pillars, window cills, cooling platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement upto and including mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately

M&L for rendering 15mm thick cement plaster 1:6 on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick cement plaster 1:3 on fair faces of concrete surfaces as in ceilings, chajja, shelves etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:3 on other than fair faces of concrete surfaces as on facia of roof slabs, chajja, shelves etc finished even and smooth without using extra cement complete all as specified and directed. (including all necessary scaffolding, lifting arrangement for three storey building on external surfaces).

S&Fin repair PVC (SWR) 'P' trap 110/110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber joints fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber joints fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction double (double 'T') equal or unequal provided with access door of 110mm dia complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal provided with access door of 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain including jointing with solvent cement 75mm dia complete all as specified and directed.

S&F PVC (SWR) reducer of 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed.

S&F in repair WC Orissa pattern white with integral foot rest 580 X 440mm including PCC bedding 1:2:4 and making good disturbed floor connecting to trap and flush pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity white with inlet ball valve, float valve and handle including brackets, PVC flush pipe complete all as specified and directed.

S&F in repair PVC connection 15mm X 450mm including brass check nuts at both ends screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F in repair Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed suitable for 15mm bore complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 580 X 450mm including 32mm dia PVC waste pipe, CP brass waste coupling 32mm dia, pair of MS brackets or MS fastener / bolts for fixing arrangements and 450mm long PVC connection with PVC nut and washer complete all as specified and directed.

S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15mm bore complete all as specified and directed.

S&F in repair stop valve 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of for union and fixed complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125mm size swivel type with connecting rod 15mm bore complete all as specified and directed.

S&F in repair stop valve cast copper chromium plated with long shank and cup concealed type screwed down high pressure with capstan head suitable for 15mm bore complete all as specified and directed.

S&F in repair stainless steel gratings of outer frame dia 150mm openable type including all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and directed.

S&F for Harrison rails mild steel chromium plated with fixing brackets etc complete all as specified and directed.

S&F 15mm dia galvanised pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm dia galvanised pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15mm dia old galvanised pipes incluidng new fittings where necessary fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20mm dia old galvanised pipes incluidng new fittings where necessary fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit and making good in CM 1:3 of girth exceeding 10 cm and not exceeding 20 cm in brick wall complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank with float valve, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr including making connections complete all as specified and directed.

S&F in repair stop valve 20mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for one coat of synthetic enamel paint tint over old painted steel surfaces over 10 cm in width or girth including preparation of old surfaces of steel complete all as specified and directed.

M&L for preparation of old plastered surfaces including filling of small holes etc and applying two coats of white wash over wall surface complete all as specified and as directed.

M&L for preparation of surfaces to newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

S&F in repair Stainless steel kitchen sink with drainage board made of stainless steel of 1mm thick sheet including plugs, washers and PVC waste pipes of 40mm dia fixing with complete on appropriate size of cantilever brackets of MS angle of GI pipe 15mm dia with proper arrangement to hold and fitting of sink complete all as specified and as directed at site and connecting union to pipe. The overall size of sink 915mm X 460mm and bowl size 410mm X 330mm X 160mm all as specified and as directed.

M&L for preparation of surface, the surface must be sound and free from dirt, dust and loose particles, thoroughly wire brush the surface and clean the dust, wash the surface with water. Any damage to the surface must be repaired by using polymer modified repair mortar with Dr. Fixit Pidicrete URP, clean the surafce, saturated with water and remove the excess water if any and bring to touch dry state. Aplplying the first coat of mixed @ 3.75 Sqm/kg, 1mm thick for two coats) Dr. Fixit Pidifin 2K on the prepared surface and allow to dry for 4 to 6 hours. Prepare another batch of Dr. Fixit Pidifin 2K and apply 2nd coat in direction 90 degree to first coat, overlay protected screed using cement sand 1:3 along with Dr Fixit LW+ complete all as specified and as directed.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus, moss, dust etc, cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab complete all as specified and as directed and removing the debris outside defence land.

M&L for rendering 20mm thick in CM 1:4 on fair face of brick work surfaces in two layers 10mm each, finished even and smooth without using extra cement upto and including mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for roof treatment with the following specifications: - (a) Applying evenly one coat of Bituminous Primer confirming to IS 3384-1986 @ 0.3 ltrs per sqm over cleaned plastered surface. (b) Applying evenly one coat of blown Hot Bitumen of Grade 85/25 @ 1.2 Kg per sqm on primed surfaces. (c) Applying a layer of APP based polymeric membrance 3mm thick (minimum) weighing 3.5 Kg per Sqm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm by torch application. The overlap shall be minimum 100mm on traverce direction and 75mm on longitudinal direction and scaling overlap by torch application. (d) Applying evenly one coat of Aluminium paint @ 0.10 Ltr per Sqm over the APP based polymeric membrane.

Cutting out cracks to V-section in existing roofs or terracing and cleaning out and grouting with cement slurry and putting in cement mortar 1:3 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in benching, coping, roof kerb or similar work, rounded or chamfered on edges and mixed with WPC as per manufacturer's instructions including necessary formwork complete all as specified and directed.

Demolition of reinforced cement concrete for slab for placing service water storage tank on roof surface complete all as specified and as directed.

M&L precast cement concrete slab (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in slab for placing water tank complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and directed.

S&F in repair for 20mm dia ball valves brass high pressure, with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm with soft / loose soil complete all as specified and directed.

M&L for hardcore of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rolled / rammed to a true surface with broken bricks complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm grade crushed stone aggregates) as sub base in floor surface complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor surface finished even and smooth without using extra cement complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS : 15658:2006 of 80mm thickness, M-40 grade complete all as specified and directed.

S&F structural steel rolled section such as joist beam, channel angle tee, MS pipe, bed plate etc in available length Fe-410 w complete all as specified and directed.

Removing excavated material not exc 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exceeding 10 Sqm on plan in any type of soil and getting out complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for sub base of flooring complete all as specified and as directed.

M&L for RCC M-25 design mix in slab supported on wall, beam and column in floor, roof, landing, balcony, canopies, deck slab and in slaves and like complete all as specified and as directed.

M&L for RCC M-25 design mix as in foundations including raft footing, foundation beam and plinth beam, bases of column complete all as specified and as directed.

M&L for RCC M-25 design mix as in column, pillar, piers, post and struts etc complete all as specified and as directed.

Formwork to sides of concrete foundation, footing, base of column and raft beam sides and soffits of plinth beam complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, column square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Formwork to soffits of suspended slab such as roof slab, floor slab landing and similar work complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beam, haunchings, girder, bresummers etc complete all as specified and as directed.

M&L for two coats of white wash on wall including preparing new surface complete all as specified and as directed.

S&F for stairs (framed) including stringes, treads, landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as directed.

Surface excavation not exceeding 45cm deep and averaging 30 cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.

S&F precast PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) kerb stone of size 150mm X 300mm and 300mm height, chamfered at one end (75mm X 75mm) fixed vertically and set in CM 1:4 complete all as specified and as directed.

E/M Portion: - Taking down old unsv copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, fllors etc complete all as specified and as directed.

Taking down old and unserviceable, distribution board any type including MCB's etc after removing all connection and make good the disturbed surface complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for one light / fan / 5 Amps independent socket point / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / steel conduit 1.8mm wall thickness ISI marked terminated into CI / pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips complete all as specified and as directed by Engr-in-Charge.

Description same as per Ser Item No 152.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description same as per Ser Item No 152.00 here-in-before but for multi 5 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description same as per Ser Item No 152.00 here-in-before but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable, PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25mm dia and unsheathed copper conductor cable multistranded cable 1.5 Sqmm as earth wire FRLS PVC insulated in green colour complete all as specified and as directed by Engr-in-Charge complete with CI / pressed steel sunken black with hylum..

Description same as per Ser Item No 152.00 here-in-before but for one light point controlled by two 2 way switches, with cables of 1.5 Sqmm size complete all as specified and as directed.

Description same as per Ser Item No 152.00 here-in-before but for one bell / buzzer point controlled by one push button on the same board with other switches or independent with cables of 1.5 Sqmm size complete all as specified and as directed.

M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

S&F in replacement for MCB SP 6 to 32 Amps, 240 Volts 'B' series complete all as specified and as directed.

S&F in replacement for MCB SPN 40 Amps, 240 Volts 'B' series complete all as specified and as directed.

S&F in replacement for switch piano, flush type, single pole one way 5 Amp, 240 Volts complete all as specified and as directed.

S&F in replacement for socket outlet 5 amp / 5 pin flush type complete all as specified and as directed.

S&F in repair for socket outlet 15 Amps, 240 Volts, 6 pin multipurpose flush type complete all as specified and as directed.

S&F in repair for switch piano, flush type single pole one way 15 Amps, 240 Volts complete all as specified and as directed.

S&F in repair for Ceiling rose 3 phase / PVC/ polycarbonate isolated body complete all as specified and as directed.

M&L in replacement for lamp holder, insulated body, with back plate suitable for batten fittings complete all as specified and as directed.

M&L in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

S&F in replacement new generation energy saving, wall mounted LED Tubelight batten fittings, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver 20 Watt LED duly fitted on PVC square block 6500K (4' ft long) with LED rod 20 watt, 230 Volts, 50 Hz complete all as specified and as directed.

S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

M&L for replacement Earthing complete with galvanised steel earth plate electrode 60 X 60cm X 6.3mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel including GI protection pipes 20mm dia light grade and 15mm dia watering pipe medium grade upto test point, charcoal common salt, PCC 1:2:4 type B-1, Pit, CI cover with Handle, excavation and earth work in any type of soil, returning, filling and removal of surplus soil where directed to a distance n.exc. 50m rest complete all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and fixing in repair LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of run 2 run 6 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length all as specified and as directed. (Wiring shall be done in proper colour coding). Note: - Including taking down of old sub main wiring.

M&L for laying PVC flat serviceable cable, multistranded aluminium conductor 16 Sqmm 2 core in air hang with proper GE earth wire and reinsulators space 1 mtr distance each / on pole / on wall / trenches / through pipe including replacement complete all as specified and as directed by Engr-in-Charge.

S&F in replacement for modular switch two way 6 amps, 1 module complete all as specified and as directed.

S&F in repair for bell push, flush type single pole, 5 Amps, 240 Volts complete all as specified and as directed.

S&F in repair for replacement calling bell Ding Dong / buzzer AC 230 Volts, single pole complete all as specified and as directed.

S&F in repair MCB single pole and neutral 32 Amp suitable for 240 Volt complete all as specified and as directed.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed magnetic setting of capacity 125 Amps 16 KA complete all as specified and as directed.

S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core complete all as specified and as directed.

Supply and laying comman burnt clay building sub class `B' bricks, laid over sand Cushioning laid at right angle along with cable, complete all as specified and as directed.

S & F in repair GI tubing light graded incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed of sizes (MS work will be measured under separate item in schedule) 40 mm complete all as specified and as directed.

S&F in replacement of Vertical Distribution board (TP&N) 12 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar complete all as specified and as directed including taking down old UNSV DB / MCB any type. Notes: - (i) Rates includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

Jagbir Singh and Co

M/S STAR CONSTRUCTIONS

M/s Koul & Sons

GENESIS INDIA

Azurite Engineering

Bhagmal and Sons

Bidder Name

Bhagmal and Sons

Jagbir Singh and Co

GENESIS INDIA

M/s Koul & Sons

M/S STAR CONSTRUCTIONS

Azurite Engineering

M/S SURINDER KUMAR