Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.2 LAccepted-AOC | L1 | Accepted-AOC Being first lowest | |
| 2 | L2₹32.5 L+₹1.6 L (5.07%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹33.4 L+₹2.5 L (8.00%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹37.4 L+₹6.5 L (21.0%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹38.0 L+₹7.0 L (22.8%)Rejected-Finance 12 MARUTI NAGAR SIKKA HANUMAN MANDIR SIKKA SIKKA JAMNAGAR GUJARAT 361140 | JAMNAGAR | GUJARAT | 361140 | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
14 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
PROVN OF ADDN/ALLTN OF BLDG NO P-05 AT LGJ MIL STN
2023_MES_628341_1
8934-53/GE/23-24
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender documents
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹88,000
Yes
1 Mar 2024
15 Nov 2023
18 Dec 2023
15 Nov 2023
14 Dec 2023
30 Nov 2023
Amount
Demolition of reinforced cement concrete of any description and in any position not otherwise specificlly provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete of any description (unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by engineer-in-Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design mix 20mm graded stone aggregrate in Chajjas; complete all as specified and directed by Engr-in-charge.
Formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by Engineer-in-charge
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
S&F for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed by Engineer-in-Charge.
M&L PCC (1:5:10) using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge.
Supply only integrated water proofing compound complete all as directed by Engr-in-charge.
M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:30 complete all as specified.
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge.Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching.(ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M & L for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment and no pigment in floors/roof, and cut and polished complete all as specified and directed.
M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
M&L for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
M&L for old size brick work with fly ash bricks straight or curved any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed
Taking down wooden chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) all as directed.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S&F for framed work as in chowkats of doors windows of angle iron ,gates or other section with gusset plates, rails, braces etc conforming to Gde Fe 410-0 or Fe 310-0 (Quality -A) complete all as specified and directed by Engineer-in-Charge.
S & F hold fast of flat iron conforming to Fe-290 or Fe 330 including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified & directed.
S&F for 125 mm long aluminium anodised handle, cast type complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.
S&F for 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hings pin, anosied and fixed type B-21 complete all specified and directed.
S&F for 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.
S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.
S&F factory made window, made out of MS hollow section of size 79mm x 39mm x 1.6mm thick frame with double shutter (glazed and wire guage shutter) made out of Z section using flush butt welding and tenon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutter, locking arrangement as per sample approved by GE, provided with knob 'Z' section handles 100mm size and 150 mm long hook and eye welded to frame and shutter,four number legs welded to frame including necessary flat iron beading for securing wire gauge and 8nos tower bolt 150mm length and guard bar used only 12mm square bars(guard bar measured and paid separately under respective item) etc complete all as specified & directed by Engineer-in-Charge.
S&F steel ventilator with top hung shutter including highes, steel peg stay complete all as specified and directed
S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.36 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even without using extra cement complete all as specified & directed by Engr-in-charge.
M&L preparing newly plastered of wall and applying three coats of white wash on wall complete all as specified & directed by Engr-in-charge
M&L for preparation of old plastered or pointed surfaces and applying two coats of white wash complete on wall all as specified and directed by Engineer-in-charge.
M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge
M&L for preparation of old plastered surfaces and applying one coat of white wash complete on ceiling all as specified and directed by Engineer-in-charge.
M&L for applying two coats of acrylic distemper over a coat of primer over 3 mm thick wall care putty over coate of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment and two coats of acrylic distemper over 3 mm thick wall care putty over coat of primer on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered wall surface and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.
M&L preparation of new or wooden based surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
M & L for painting new/untreated steel and iron surfaces of any discription,over 10 cm width or girth, with two coats of synthetic enamel paint over coat of red oxide primer ordinary tint including preparation of new surfaces all as spefified and directed
M & L for painting old steel and iron surfaces of any discription,over 10 cm width or girth, with two coats of synthetic enamel paint ordinary tint including preparation of old surfaces all as spefified and directed
M&L for preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.
S&F 4 mm thick pin headed glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in -Charge.
S&F 4.0 mm sheet glass ordinary quality and glazing with oil putty or with beading in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
Taking down PVC soil, waste & rain water pipe 100/75 mm dia including fittings fixed to walls, laid in floor etc complete all as specified and directed by Engr-in -Charge.
S&F 110 mm dia bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F 450mm long mild steel GI pipe, medium grade of size 40mm dia as in spouts pipe in sunken floor including making holes in RCC and making good with CM 1:1 or PCC (1:2:4) complete all as specified and directed by Engineer-in-Charge.
S&F SWR bend 110mm bore complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing in repair 100 mm bore cast iron hubless pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge. Make:- NECO
S & F in repair cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F in repair cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F in repair 75 mm bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
M & L in repairs cast iron floor trap dia of out let 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed by Engineer-in-Charge.
S & F in repair cast iron 75 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F in repair cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position all as directed.
All as per item No 71 above but 20 mm dia pipe
All as per item No 71 above but 25 mm dia pipe
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
All as per item No 74 above but 20 mm dia pipe
All as per item No 74 above but 25 mm dia pipe
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.
S&F in repair CP brass stop valve/ angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed complete all as specified and directed by Engr-in-charge.
S&F in repair CP brass stop valve/ angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type fixed complete all as specified and directed by Engr-in-charge.
S&F in repair gun metal globe or gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engineer-in-Charge.
S&F tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in cement concrete fixed all as specified.
S&F in repair vitreous china wash down water closet pan (pedestral pattern), white (excluding fixing bolts ,flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete.
S & F in repairs Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.
S&F in repair vitreous china wash hand basin coloured counter flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F in repairs grating doom CP 100 mm dia with waste hole complete all as specified and directed
S & F in repairs 32 mm PVC waste down pipe suitable for WHB and urinal complete all as specified and directed by Engineer-in-charge
S & F in repairs pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with lettered hot/cold with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle, and connection to pipes and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long all as directed.
Supply & fixing in repairs PTMT swivel shower roses 125mm with or without swivel joints, including fixing to steel pipe or union fixed complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair glass corner shelf with CP brackets and CP railingcomplete all as specified and directed by Engineer-in-Charge.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.
S&F 1000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms)
M&L continous brick edging using old size bricks width equal to the depth of the brick laid dry on end vertically complete all as specified & directed by Engr-in-charge .
M&L for 75 mm thick cement concrete type D-2,1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed by Engineer-in-Charge.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
M&L 16 to 18 mm thick granite of approved colour as in shelves/partition rubbed and polished, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding the edges half round on exposed side over and including 20 mm thick screed base in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
M & L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.
M & L for Machine cut kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed
S&F drapery stainless steel rods, standarad quality, not less than 25/28 mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunching of manholes including forming channels including necessary formwork etc.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces all as directed
E/M Portion Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
M&L for concealed Point wiring for one light point/fan/Ext fan controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.
,--ditto--- all as per Serial item No 109 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,---ditto-- all as per item No.109 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
Supply and fix switch, piano type, Single pole, one way 5/6 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
Supply and fix piano socket 2 in 1, 2/3 pin 6 amp flush type 250 volts AC complet all as specified and as directed
Supply and fix piano socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complet all as specified and as directed
Supply and fix piano swith 15 amp flush type 240 Volts AC complet all as specified and as directed
S & F LED light fitting 1 x 20 W, 230 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge
S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC deccorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completed
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
Supplied & fixed distribution board Double Door made out of CRCA mild steel sheet surface with insulated matrial like polyster or with powder coated surface mounting SPN 8Way 240 volts with bus bar rating 200 Amps dust and vermin proofsuitable for incorporration of MCBs and isolators etc completed all as specified and directed
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning etc completed all as specified and directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity SP 5 To 32 AMP, in the MCB SPN complete with connection testing and commissioning etc completed all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB SPN complete with connection testing and commissioning etc completed all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete etc completed all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete etc completed all as specified and directed.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
ram rattan dass aggarwal
Dashmesh Construction Company
PAREEK AND COMPANY
SHIVA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .