Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹38.6 L+₹78,351.40 (2.07%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹42.0 L+₹4.3 L (11.3%)Rejected-Finance 117 BHAISAHIYA TOLA GANESHGANJ MIRZAPUR UTTAR PRADESH 231001 | MIRZAPUR | MIRZAPUR | UTTAR PRADESH | 231001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹44.8 L+₹7.1 L (18.7%)Rejected-Finance 361 D SHAKTI NAGAR NEAR KHAN DAIRY INDIRA NAGAR LUCKNOW 226016 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226016 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹48.4 L+₹10.7 L (28.2%)Rejected-Finance 0 MADHUPUR SAKARDAHA MADHUPUR SAKARDAHA SARAON MADHUPUR SAKARDAHA ALLAHABAD UTTAR PRADESH 212502 | PRAYAGRAJ | UTTAR PRADESH | 212502 | L5 | Rejected-Finance Being L5 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
REPAIR/MAINT OF LT DISTRIBUTION NETWORK AND STREET LIGHTS FITTING AT 39 GTC VARANASI UNDER GE (EAST) PRAYAGRAJ.
2024_MES_637218_2
8691/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Varanasi
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Prayagraj
₹1 L
Yes
4 May 2024
28 Feb 2024
29 Mar 2024
28 Feb 2024
27 Mar 2024
13 Mar 2024
Amount
Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed.
Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.
Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only.
Supply and laying dry well burnt locally available brick sub class 'B' old size bricks, laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.
M&L for boring hole under PCC road/ taxi track/ runway/ hard standing upto the depth 450mm to 1200 mm for passing cable through / insertion of 80/50mm dia GI pipe complete all as directed by Engineer-in-charge. NOTES :- (i) Cost of equipments, tools & plants,material required for boring shall deemed to be included in unit quoted rates. (ii) GI pipe shall be measured and paid separetely.
S&F 32 mm dia GI pipe 'light grade' ISI marked fixed on wall/pole or laid in trenches under road crossing/hard standing complete all as specified and directed.
Ditto all as per item No. 07 above but 50mm GI pipe.
Ditto all as per item No. 07 above but 80mm GI pipe.
S&F in repair service cable of size 4 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed.
Ditto all as per item No. 10 above but 6 sqmm 2 core cable.
Ditto all as per item No. 10 above but 10 sqmm 2 core cable.
Supply and errection of steel tubular pole (in repair) swaged type 410-SP 31(9.0m long pole) as per IS:2713 (part I to III) 1980 with cast iron base plate, pole cap, mild steel bolt, nuts and screws including dismantling of exsiting pole complete all as specified and directed. The quoted unit rates includes the following works:- (i) Earth work (excavation, returning filling and removing surplus soil) required for pole foundation in soft/loose soil. (ii) PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation of size 900mmx600mm and planting depth 1.5 mtr below for concrete encasing the pole. (iii) PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/collar above GL, 500mm high and 450mm dia around the pole. (iv) Painting of pole externally with one coat of black bituminous paint (upto planting depth before erection) and with two coat of aluminium paint over a coat of red oxide primer above plinth block /concrete collar including preparation of surface. (v) Marking 05 Nos 30 cm wide bands/ strips in alternate layer with synthetic enamel paint of two shade/ colours upto the height of 1.5mm above plinth block. (e) Writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade for numbering of pole ( height not less than 5cm) NOTE : Manufacture's test certificate will be produced before execution work.
Supplying ,laying, commissioning & testing 16 Sqmm, 4.0 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Ditto all as per item No. 14 above but 10 sqmm 4 core cable.
Ditto all as per item No. 14 above but 10 sqmm 2 core cable.
Ditto all as per item No. 14 above but 6 sqmm 2 core cable.
Ditto all as per item No. 14 above but 240 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 150 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 120 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 95 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 70 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 50 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 35 sqmm 3.5 core cable.
Ditto all as per item No. 14 above but 25 sqmm 3.5 core cable.
M&L in repair for cross arms bracing, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling hole for bolts, in any shape or size as indicated or directed and inclusive two coat of aliminium paint over a coat of primer including taking down of exsiting cross arms complete all as specified and directed.
M&L for repairing of indoor/outdoor electric panel of any size/type, removing dust,dirt by cleaning/scrubbing inside outside, welding as required, replacing burned out screw/nut bolts as required for smooth closing of panel doorr including painting externaly with one coat of synthetic enamel paint after preparation of surface also without disturbing the existing fittings and fixture , proper taping to incomming outgoing LT UG conductor with flexible tape/ insulation tape and marking/ writing letter such as SM No. capacity etc,with safety precaution complete all as specified & directed.
S&F in repair rubber insulating matting as per ISI Mark (size 1m x 2m x19 mm) suitable for voltage upto 11 KV including taking down old/unserviceble insulating matting complete all as specified and directed.
M&L for painting of 9.00 mtr long steel tubular pole including cross arms, clamps of any length and shape for overhead line/street light and with two coat of aluminium paint after priparation of surface , marking pole number in a 15cm dia yellow circle and zebra painting with three black & two yellow bends of 30 cm width ulternatibly by fluorescent paint starting from top of the coping of pole, applying one coat of white wash on coping with safety precaution complete all as specified & directed. Note - All the instruments and T&P required for the above job shall be arranged by the contractor at site including Ladder,Safety Harness and cost of the above deemed to be included in the rates.
S&F in repair sheet metal enclosure (DB) VTPN type for MCCB, double door 415 Volt with 200 amp rated bus bar suitable for in MCCB as incomer and MCB SPN as outgoing complete all as specified and directed. NOTE : MCCB and MSBs shall be measured and paid seperatly under respecitve item of BOQ.
S&F in repair MCCB 63 Amp,4 pole ,415 Volt ISI marked conforming to 'B" curve, breaking capacity 16 KA complete all as specified and directed.
S&F in repair ACB,4 pole, 415 volts, 630Amps, with thermal megnetic release ((Manual Fixed type) breaking capacity 50 KA, complete all as specified and directed.
S&F in repair MCCB, 4 pole, 415 volts, 400 Amps, breaking capacity 50 KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&F in repair MCCB , 4 pole, 415 volts, 250 Amps, breaking capacity 35KA/36 KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&Fin repair MCCB , 4 pole, 415 volts, 200 Amps, breaking capacity 35KA/36 KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&F in repair MCCB , 4 pole, 415 volts, 160 Amps, breaking capacity 35KA/36 KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&F in repair MCCB , 3 pole, 415 volts, 100 Amps, breaking capacity 35 KA/36 KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&F in repair MCCB , 3 pole, 415 volts,63 Amps, breaking capacity 25KA, with thermal magnetic release adjustable type complete all as specified and directed.
S&Fin repair MCB TPN, 4 pole, 415 volts, 63 Amps,'B' curve 10 KA serviceble MCB complete all as specified and directed.
S&F in repair LED integral flood light luminaires 200 watt in powder coated with aluminium die cast housing and frame,high efficiency,long life LEDs,loop in loop out connector,10 A G.F.P for each wiring heat resistant toughned glass in the front with unique flood optics to ensure uniform distribution and IP 66 protection complete assembly with LEDs,driver and accessaries pre wired up to terminal block including connection on pole complete all as specified and directed. Make- Orient cat No. - ALPHA-LFAP-200-C or techno-commercially equivalent model in any make as approved by GE
S&F in repair LED street light luminaires 60 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building complete all as specified and directed. Make- Crompton cat part No- LST-60-CDL-M, Havells Cat Part No.- LHETAXU7PN6J060
S&F in repair LED street light luminaires 90 watt with pressure aluminium -die- cast powder coating housing & frame with heat resistant,high efficiency toughned glass with EPDM gasket for IP66 protection complete assembly with LED ,driver& accessories pre-wiredup to terminal block including connection on pole or building complete all as specified and directed. Make- Crompton cat Part No.- LSTP-90-CDL or Havells cat Part No.- LHETAXU7IN6J090 or C&S cat Part No. LTESS40X25HPLED/LS
M&L for sheet metal enclsure (Feeder pillar box), outdoor type, made out of 3 mm thick powder coated CRCA sheet, with hinged door & locking arrangement fixed on MS frame made of angle iron of size 40 X 40 X 6 mm having 90cm long lags grouted/embeded 30cm below GL ( 60 cm above ground level) in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) duly painted exposed surfaces of fram with two coat of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. Feeder pillar box shall comprising the following:- (i) 4x aluminium bus bar of rating 200 Amp mounted on insulator. (ii) 1x MCCB 4 pole 63 Amp 415 volts with thermal magnetic release breaking capacity 25 KA as incomer,
S&F in repair off load type change over switches panel mounted in open execution, front operated rotary handle of 200 Amp rating, 4 pole, 415 Volt complete all as specified and directed.
S&F in repair off load type change over switch panel mounted in open execution, front handle operated of 100 Amp rating, 4 pole, 415 Volt complete all as specified and directed.
S&F in repair onload type change over switch in open execution, side handle operated of 100 Amp rating, 4 pole, 415 Volt complete all as specified and directed.
S&F in repair onload change over switch in open execution, side handle operated of 63 Amp rating, 4 pole, 415 Volt complete all as specified and directed.
M&L for in repair of fault in HT/LT UG cable of any size after Locating fault using Fault locator Megger machine, preparing both ends of cable for connrcting to the jointing kit including necessary earth work, if required complete all as specified and directed . NOTE : (i) All the instruments,and T&P required for the above job shall be arranged by the contractor at site and cost of the same deemed to be included in the above rates. (ii) Jointing kit shall be measured and paid seperatly under respective item of BOQ.Contractor should be provide two labours for Joining and dismentling of cable at both the end and excavation above the faulty cable if reqd
Supply, jointing and testing cable jointing kit cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 1100 volt grade XLPE cable of size 25 sqmm to 50 sqmm 3.5 core complete all as specified and directed.
Ditto all as per item No. 49 above but suitable for cable of size 70 sqmm to 120 sqmm
Ditto all as per item No. 49 above but suitable for cable of size 150 sqmm to 185 sqmm
Ditto all as per item No. 49 above but suitable for cable of size 240 sqmm to 300 sqmm
Ditto all as per item No. 49 above but suitable for cable of size 400 sqmm to 500 sqmm
Supply, installation and testing of factory made, CPRI Approved cubical outdoor (Kiosk) type feeder pillar box 415 volt, 4 wire, AC 50 Hz, made out of 3.15 mm thick CRCA sheet, weather and vermin proof powder coating finish bothside(interior & exterior) for outdoor mounting with having degree of protection as per IP-56 complete factory lock two earth terminal suitable cable gland for all incoming and outgoing and removable neutral link, Both Side openable double door Indicating light LED type RYB - 01 Set, Ammeter-01, Voltmeter-01, connecting strip/solid conductor brought out to cable chamber brass/copper nut, bolts/washer etc , placing /fixing feeder pillar box 60 cm above ground level on suitable size angle iron stand made up of 65 x 65 x 6 mm embedded in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) upto depth not less than 30 cm including necessary excavation and earth work complete all as specified and directed. Feeder pillar box shall comprises the following asseccories :- (a) copper insulatd busbar high conductivity 400 Amp rated 4 phase including neutral bus bar complete - 01 No. Incoming :- (b) MCCB 4 -pole 250 Amp make-Havells ,415 Volt,breaking capacity 36 KA,50 HZ with thermal magnetic release - 01 No. Outgoing :- (c) MCCB 4 - pole 160 Amps breaking capacity 25 KA, 50 HZ - 01 Nos. (d) MCCB 4 - pole 125 Amps breaking capacity 25 KA, 50 HZ - 03 Nos. (e) MCCB 4 - pole 63 Amps breaking capacity 25 KA, 50 HZ - 01 Nos.
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 24x4mm flat iron strip by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25mm x 25mm x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
All as per item No. 55 above but using 4mm dia GI wire as earth lead.
M&L for Earth continuity conductor or main earthing lead made out of 25x4mm galvanised iron strip, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed.
M&L for loose filling spreading and leveling hard core 40mm graded corse aggregate complete all as specified and directed
M&L for surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15 cm and getting out including leveling the surface complete all as specified and directed.
S&F Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed.
S&F Danger notice plate of 20x15cm size, made out of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT complete all as specified and directed.
Ditto all as per item No. 62 above but suitable for HT of size 25x20cm
Cleanning of grass, surbs, bushes small trees etc from inside the installations as well as around the installation premisses (max upto the 2 mtr all around the wall), removing garbage and deposting where directed complete all as specified and directed. Note- Necessary T&P shall be provided by the contractor and rates are deemed to be included the quoted rates.
Repairing of existing non functional LED security/ street light fittings fixed on pole/ wall/ pipe of any type & wattage by means of removing cabon on contacts, tightning loos connection, replacing unserviceable accessories like SPD, LED Driver etc, tightening of brackets, clamp and including testing after refixing the fitting and reconecting electric connection, complete all as specified and directed. NOTE : (i) Accessories required for replacement shall be measured & paid separately under respective items of this BOQ. (ii) The cost of diconnecting electric connections, taking down, dismantling reassembling , refixing of fitting, reconnection of electric connections if required , minor items like nut, bolt, washers, screws insulation tap etc shall deemed included in quoted unit rates. (iii) The cost of cable and wire if required for connections shall be deemed to be included in quoted rates. (iv) Any type of T&P like Ladder etc or arrangement for dismantling of light from pole/ hanger pole shall be arranged by the contractor cost of the same demmed included in quoted unit rates.
S&F in repair surge protection device 10 KV, suitable for LED street lights of capacity 45 watt to 250 watts, single phase, 230 volt, 50 Hz, AC supply complete all as specified and directed.
S&F in repair LED street light/Flood light fitting driver/ choke 36/40/45/60 watts, 240 volts AC 50 Hz electronic type complete all as specified and directed.
S&F in repair LED light fitting driver/ choke 70/75 watts, 240 volts AC 50 Hz electronic type complete all as specified and directed.
S&F in repair LED street light/Flood light fitting driver/ choke 90 watts, 240 volts AC 50 Hz electronic type. complete all as specified and directed.
S&F in repair LED street light driver/ choke 25/30 watts, 240 volts AC 50 Hz electronic type complete all as
S&F in repair LED street light luminaires 25 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Crompton Cat Part No-LSTS-25-CDL/NL-M, Havell Cat Part No.- LHETAXU7PA6J025, Bajaj Cat part No. ENXT P 25L WH PO PC SD.
S&F in repair LED street light luminaires 35 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Bajaj Cat part No. ENXT P 35L WH PO PC SD or Crompton cat No- LSTS-36- CDL-M or techno-commercially equivalent model in make Havells/Wipro
S&F in repair GI bracket for security light & street light fittings fabricated with GI tubing 40 mm dia 'medium grade' 1.2 m long including and bending to angle of 120 degree complete all as specified and directed.
S&F in repair mild steel clamp fabricated with mild steel flat iron 50mm x 6 mm including nut and bolts with washer suitable for fixing of GI bracket on PCC/ steel poles complete all as specified and directed.
Fixing only in repair old street light GI pipe/ bracket with clamp and nut, bolt, washers etc in same or in other locating complete all as specified and directed. Note : (i) New nut/ bolt/ washers if required shall be provided by the contractor and quoted rates shall deemed included the same.
S&F in repair hot press moulded PVC junction box of size 230mm x 170 mm x 105 mm with 200A TPN Aluminium bus bars mounted/ fixed on porcelien insulator shock and rust proof,cable entry from bottom and other sides, 100% weatherproof, with pole mounting arrengement temperproof,fire retardant class FV-0 as per IS 11731 part -II or V-O as per UL-94 including flat iron clamp of size 25 x 3 mm with nut and bolt, washers complete all as specified and directed.
S&F in repair Electronic street light Astronomical control timer switch, operating automatic/ mannually of capacity 6 KW, conforms to IS/IEC 60947-4-1, 3 phase, 415/230 volts, 50 Hz, ISI marked with sheet metal encloser box wall/pole mounting type including heavy duty clamp made out of mild steel sheet 3.15 mm thick duly painted with two coat of synthetic enameled paint over a coat of red oxide primer suitable to accommodate the following :- (a) Three phase control switch MCB TPN 40A 10 KA - 01 No (Incoming) (b) Auto/Manual control switch (c) Heavy duty 3 Phase Contactor ML-3 with axulllary contact - 01 No (d) sun light senser cat eye type complete to operate before sun rise & after sun set (d) Astronomical Timer - 01 No. Make - Havells cat Part No - IHXTS0306A or equivalent make in L&T, Legrand
S&F in repair energy saving LED garden light fitting, decorative, bollard of capacity 10 watt with opal diffuser & aluminium reflector complete with all accessaries and fixing arrengement on PCC block alogwith fixing nuts, bolts and 4.0 sqmm 2core PVC insulated aluminium conductor cable complete all as specified and directed. Make - Orient Step Bollard Cat part No.LLSBL-10-W or Crompton Cat Part No. LBLA3-10-CDL or Bajaj Cat part No. BGBOM 1000 9W LED WW or techno commercial equivalent make in Havells/C & S
Taking down existing non functional high mast/semi High mast pole light any type/wattage for repair including replacement of unserviceable spares/accessories like ballast, starters, ignitors, lamps, service connection etc & errecting the same after cleaning & greasing of SWR rope in position after complete repair and testing complete all as specified and directed. NOTE : (i) Replacement and fixing of unserviceable component etc required will be measured & paid separately under respective items of this schedule. (ii) The cost of cable and wire if required for connections shall be deemed to be included in quoted rates. (iii) Any type of Ladder or arrangement for dismantling of light from pole/hanger/high mast pole shall be arranged by the contractor.
M&L for Rewinding of motor with super enameled copper wire of high mast light any type (gauge/weight of copper coils shall be same as per existing dismantled motor strata), including varnishing complete all as specified and directed by Engineer-in-Charge. Notes :- (a) Removing the defective motor & rectifying after repair including removing defective parts, burnt winding carefully, cleaning & re-assembling the motor after repair/servicing including oiling, greasing etc.complete to the entire satisfaction of Engineer-in-charge.
S&F in repair PVC insulated & FR PVC round stranded sheathed conductor copper multi core round (flexible) industrial cable 1100 volt with bright concealed electrolytic bare copper conductor for voltage 1100 volts grade of size 16 sqmm, 4 core confirming to IS-694-1990 on semi high/high mast poles of any height and connecting complete all as specified and directed.
S&F in repair PVC insulated & FR PVC round stranded sheathed conductor copper multi core round (flexible) industrial cable 1100 volt with brightannealed electrolytic bare copper conductor for voltage 1100 volts grade of size 10 sqmm,4 core confirming to IS-694-1990 on semi high/high mast poles of any height and connecting complete all as specified and directed.
S&F in repair LED integral flood light luminaires 170 watt in powder coated with aluminium die cast housing and frame, high efficiency, long life LED, loop in loop out connector, 10A G.F.P for each wiring heat resistant toughned lear glass cover and IP 66 protection complete assembly with LED, driver and accessaries pre wired up to terminal block in control gear compartment including connection on pole or building complete all as specified and directed.
S&F in repair LED integral flood light luminaires 120 watt in powder coated with aluminium die cast housing and frame,high efficiency,long life LEDs,loop in loop out connector,10A G.F.P for each wiring heat resistant toughned lear glass cover and IP 66 protection completeassembly with LEDs,driver and accessaries pre wired up to terminal block in control gear compartment including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Wipro Cat Part No.-LR18-132-XXX-57-XX, C&S Cat Prat No.- LTEFI120WHPLED, Havells-LHEPCZU7P46J120.
S&F in repair under water luminiaries 7 watt LED light for connecting under water lighting purpose of fountain, Corrosion resistant, Nickel plated brass housing, water proof with flanges of top coloured glass with rubber gasket on both sides , mounted in brass frame with all accessiories and LED complete all as specified and directed.
Trimming of tree branches touching to overhaul bare electric condutor lines/ electric installation to thr entire setisfection of Enng-in-charge, removing the garbage and deposting where directed complete all as specified and directed. Note- (i) Proper safety kit and cuttings tools, ledder, electric saw/generator set, wire rope etc shall be provided by the contractor and rates are deemed to be included the quoted rates. (ii) contractor shall insure Taking proper electric shutdown from the department befor strting this work and detail a apropriate person to keep close monitoring of shutdowm during the work. after closing the work he shall responcible to report engineer -in-charge/ JE concern for restoration of shutdown.
M/S DEEKSHA CONSTRUCTION
prabhawati shanti automobiles
Eco Creations
Avion Industries
M/s A.K Construction
BHATIA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .