CERTAIN MISC PETTRY B/R DAY TO DAY REPAIR WORK TO MD AND OTM ACCN AT VAYU VIHAR CAMP AND IAM UNDER GE (AF) MARATHAHALLI

Petty repairs to joinery works ( Aluminium, Wooden, PVC, Glas door etc) such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. (Note : Replacement of fittings and fixture like Bib tap, Piller Tap etc. if required shall be measured and paid separately.)

Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows, Aluminium Ventilators, toughfened glass door taking down and refixing after repairing, and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading, gasket, filling of silicon, etc to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5sqm but not exc. 4.0 Sqm each

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

S & F 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

S & F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

S & F 100 mm Aluminium alloy Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and directed.

S & F in repair 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed