GE/ALP (8145B) KOLKATA OF 2022-23

Amount

Material and labour for LED signage board visible from both side of size not less than 300 x 200 mm made out of sandwiched transparent acrylic sheet (minimum 6 mm thick) and necessary computerized laser cutting for letters/ signs illuminated with LED light 8 watt, 12 volt of approved colour including necessary driver and twin core PVC insulated and sheathed multistranded copper conductor 1.5 sq mm up to 1.0 meter long for connections, including fixing arrangement to wall or ceiling by providing necessary hardware materials including taking down of old signage board complete all as specified and as directed. [Note: - The letters or symbols or signs will be engraved as per direction and a sample printed on plain paper as per actual size should be got approved from Engr-in-Charge.

All as per Ser No 1 here-in-before but of size not less than 600 x 200 mm with LED light 12 watt, 12 volt.

Material and labour for LED signage board visible from single side of size not less than 300 x 200 mm made out of sandwiched transparent acrylic sheet (minimum 6 mm thick) and necessary computerized laser cutting for letters/ signs illuminated with LED light 6 watt, 12 volt of approved colour including necessary driver and twin core PVC insulated and sheathed multistrand copper conductor 1.5 sq mm up to 1.0 mtr long for connections including fixing arrangement to wall or ceiling by providing necessary hardware materials complete including taking down of old signage board all as directed. [Note: - The letters or symbols or signs will be engraved and a sample printed on plain paper as per actual size should be got approved from Engr-in-Charge.

All as per Ser No 3 here-in-before but of size not less than 600 x 200 mm with LED light 12 watt, 12 volt all as directed by the Engr-in-Charge.

Maintenance of LED sign boards installed at various locations of AGE E/M-I & II sub divisions under GE (A) Kolkata area by taking down the LED sign boards carefully from its location and carryout servicing, checking the all loose connection of alphabets/numerical in the board to its serviceability, tightening of loose connections, cleaning, dusting and refixing the same in original location of board. The comprehensive maintenance covers the 16 Nos boards of following sizes :- (a) 3.00Mx1.22M -02 Nos (b) 2.44Mx1.22M -02 Nos (c) 2.72Mx1.22M- 04 Nos (d) 2.88Mx1.10M- 01 Nos (e) 4.50Mx 0.60M-01 Nos (f) 3.00Mx 0.75M-01 Nos (g) 3.50Mx 0.60M-02 Nos (h) 3.60Mx 0.90M-03 Nos Note :- (i) Cost of necessary scaffolding, trolley mounted ladders etc, the cost of copper wire multistrand of size 2.5/1.5 Sqmm required for connection from MCB to SMPS and SMPS to LED modules in the board , Switches 5 Amp, Ceiling roses & PVC supports of the sign board are deemed to be included in the quoted rate (ii) Spares will be measured and paid under separate items of this schedule (iii) Items damaged during repair if any will be repaird/replaced by the contractor at his own cost all as directed by the Engr-in-Charge. No extra payment shall be levied afterwards.

Supply only SMPS 400 watt 12 volts, 33 ampere, 230 volt, 50 Hz, for LED sign board Complete all as specified and all as directed by the Engr-in-Charge. Make :- Zebronics / Foxing / MX / CE / ADS

Material and labour for carefully dismantling of all the alphabets of LED sign boards installed at a height of 30 mtr above ground level, carefully taking down the board and applying two coats of synthetic enamel paint (1st quality) in approved colour in different shade to existing LED sign board after preparation of surfaces and re-fixing the LED sign letters and placing the board in original position complete all as specified and directed by the Engr-in-Charge.

Material and labour for fabrication of MS Angle, joist, channel Flat Squire hollow Pipe frame work for LED sign boards of gates, Road Dierection Boards etc at any location all as specified and as directed by the Engr-in-Charge.

Material and labour for Writing letters or figures (Block. Roman, Italic or Indian) of size 3 cm high with thick paint of approved colour over indicated surface all as specified and all as specified and as directed by the Engr-in-Charge..

Material and labour for writing `Stops, commas, short lines, dashes, hyphens, brackets, symbols' of any description with thick paint of approved colour over indicated surface all as specified and directed by the Engr-in-Charge.

M & L for replacement of sticker of size not less than 300 x 125 mm by making drawing with computer art work for letters, figures, scanning etc in approved colour in water proof glossy 'PVC synthetic paper suitable for scotch/ inkjet printing with outdoor ink 300 x 1400 DPI and pasted at different places and different types of writings as directed. Matter to be printed: "In case of emergency please contact following Nos, complaint cell No. Lift mechanic No, JEs No, AGEs No (GE Alipore Kolkata)" and likewise all as specified and all as directed by the Engr-in-Charge. [Note: The matter to be got approved from Engr-in-Charge before final printing]

Material and labour in replacement for 0. 025 mm thick white rubber coated vinyl sheet or synthetic vinyl sheet printed with computer inkjet printing with outdoor ink with 300 x 720 and also 2800 DPI laminated with 0.15 mm thick high quality all weather protected transparent calendar film (mat/gloss) posted with chemical adhesive on and including 1.5 mm thick polycarbonate PVC sheet all weather proof milky white/transparened sheet and finally thorough washed with liquid soap complete all as specified and directed. Note: (i) The work under this item comprises of matter/ drawing by computer as required for location, art work on planner machine and scotch print/ inkjet print 720 to 2800 DPI. (ii) The matter composed of letters/ figures/ symbols etc shall got approved from the Engr-in-Charge before taking the final printout.

Material and labour for Aluminum anodized equal angle of size not less than 25 x 25 x 0.80 mm thick fixed to corners of front side of glow sign boards for fixing of Vinyl sheet / acrylic sheet or existing sheets of any description including fixing with GI machine screw complete all as specified and as directed by the Engr-in-Charge. Make : JINDAL/HINDALCO/NALCO

Material and labour for Aluminum anodized equal angle of size not less than 22 x 38 x1.2 mm thick fixed to corners of front side of glow sign boards for fixing of Vinyl sheet / acrylic sheet or existing sheets of any description including fixing with GI machine screw complete all as specified and as directed by the Engr-in-Charge. Make : JINDAL/HINDALCO/NALCO

Material and labour for replacement of Plain Galvanized Iron sheet 0.32 mm thick, zinc coated both side and making glow sign board including necessary turning up for corners etc and necessary decoration as per site requirement and as directed by the Engr-in-Charge. Make : JINDAL/NEZONE/SAIL/TATA

Material and labour for making of Drawing with computer art work and letters, figure, writing work, scanning etc in approved coloured print in water proof glossy paper for any size such as `Lift Nos, Floors Nos, Dogs are not allowed, Danger 440 volts, Breakdown (Men at work), Important Telephone Numbers, In Case of Fire, No Admission\, No Parking in front of Installation, No Smoking and other matter' as required at site, pasted on and including 0.5 mm thick sun board or ACP with adhesive including necessary washing two/ three times by suitable chemical including lamination properly with transparent sheet at front side and making hanging arrangement complete including taking down of old one all as specified and as directed by the Engineer-in-Charge. Note: (i) The work under this item comprises of composing of matter/ drawing by computer as required for a prticular location, art work on planner machine and scotch print/ inkjet print 720 to 2800 DPI on 0.025 mm Vinyl sheet or 0.050 Rectro Reflactor sheet. ii) The matter or composed letters/figures/ symbols etc shall got approved from the Engr-in-Charge before taking the final printout.

Repair maintenance of LED sign boards by opening the front acrylic sheet, cleaning of inner and outer surface of the board, cleaning the LED lamps/LED modules, and also replace/changing of the damaged boxes and the acrylic sheet with and also re-fixing the same after cleaning and repairing Boards of size not less than 4500 x 600 mm in installations all as directed by the Engr-in-Charge.

All as per item Ser No 17 but of size not less than 3200 x 600 mm all as directed.

All as per item Ser No 17 but of size not less than 6000 x 450 mm all as directed.

All as per item Ser No 17 but of size not less than 2400 x 600 mm all as directed.

All as per item Ser No 17 but of size not less than 3200 x 300 mm all as directed.

S&F energy efficient LED tube light fitings suitable for 1x18/20 watt 1800 lm ,CRI > 80, IP 20 compact complete all as specified. Make : BAJAJ / HAVALS / PHILIPS/ Crompton.

S&F energy efficient LED tube light fitings Integral sleek polycarbonate LED channel with white acrylic cover suitable for 1x10 watt 1000 lm ,CRI > 80, IP 20 compact complete all as specified. Make : BAJAJ / HAVALS / PHILIPS/ Crompton.

Supply and fix in repairs Driver for LED light suitable for supply voltage 100-265 volt AC with output at 12 volt DC 100 watt (8.33 Amp), frequency 50 - 60 Hz, moisture and rain proof, with over voltage, over current, short circuit and over temperature protection of sign board complete all as specified. Make: - CE/ Union electro Com Co Ltd or compaitable make suitable for existing sign board.

All as per item Ser No 24 here in before but driver for multi colour LED light with RF controller module, suitable for DC 12 V up to 24 Amp with remote control complete all as specified and as directed.

All as per item Ser No 24 here in before but SMPS (Switched Mode Power Supply) for LED display board suitable for supply voltage 100 to 265 volt AC with output at 12 volt DC 10 to 40 Amp. Make :- Zebronics/ADS/ Foxing/ MX/ CE

Material and labour for Painting of steel surface with two coats of synthetic enamel paint of approved colour including taking proper precautionary measure by taking necessary shutdown of electric supply and carryout reconnections after drying up of paint complete all as directed.

Supply and fixing in replacement for PVC insulated sheathed multistand copper conductor cable 1.5 sq mm 2 core PVC insulated as specified .

M & L for Manufacturing of MES BLUE BOOK in Digital Printing through computer in Black & White Page for Official data and Colour Page for Schematic Diagram/Maps etc and including necessary spiral Binding complete all as directed. Note: The each book shall have approx 200-250 total pages having minimum 60 Nos of colour pages all as directed by the Eng-in-Charge.

Material and labour for fabrication of LED display board of size not less than150 mm depth with 3 mm thick ACP sheet in all sides except rear side and 0.32 mm GI sheet at rear side and frame made out of MS square pipe of size 22 x 22 mm to get support from rear side. ACP sheet cutting with laser cutting machine including painting of MS pipe frame with two coats of synthetic enamel paint over a coat of red oxide metal primer complete all as specified directed by the Engr-in-Charge. Note: - The area of front side of the board only will be measured for the purpose of payment.

Material and labour for LED lamp box of any size and any depth fixed at different places for LED display board by making drawing with computer art work for alphabets/ digits/ symbols/ scanning etc in approved coloured laser cut LED lamp box made out of three layers of acrylic sheet 3 mm thick with laser cut as per approved matter drawing with computer art work sandwiched with one transparent sheet , one coloured sheet of approved colour and one white sheet at top including 12 volt LED strip light of suitable length to fit into the LED lamp box duly connected all as specified and as directed.

Fixing the assembled glow sign board in position with complete fitting to steel frame/on wall surface with provision of required size nuts & bolts, screw & washers etc up to a height of 4 mtr including provision of necessary scaffolding complete all as specified and as directed.

All as per item No 32 here-in-before but for 9 mtr height (up to) from GL outdoor open type without support of front and backside (both side) including necessary arrangements all as directed by the Engr-in-Charge.

Taking down unserviceable laminated board & Supply & Fixing only laminated board in any position (wall/steel surface) at installation/office a with necessary nut, bolt & screws up to height -3 mtr, from GL/floor complete all as and as directed.

Supply and fixing for LED Display Board Size up to 3200 mm X 900 mm made by GI sheet including MS/GI hollow pipe 25 mm X 25/40mm X1.9 mm of box size 1650 mm X 900 mm X 100 mm and 1800 mm X 1200 mm ACP Sheet,4mm thick the sheet cutting by laser machine and molding by machine and necessary Gas welding, painting to steel surface with two coats of synthetic enamel paint over a coat of red oxide primer and cleaning of GI sheet with modern solution and painting with rwo coats syenthetic enamel & one coat of red oxide primer red lac with necessary chemical wash complete all as specified and as directed.

Material and labour for making drawing with computer art work and letters, figure, writing work, scanning etc in approved colour print LED letters/Alphabet "A" to "Z" and numeric "0" to "9" as required at site in 375mm height and not less than 250mm with depth and base (back side) not less than 75mm made by 3mm thick /transparent/clear Acrylic sheet and 3mm white glow sheet all sides with computerized laser cutting from Laser Cutting Roughter machine and molding with molding machine and necssary hot pasting for the shape and size. Front side cover made of 3mm thick Coloured Acrylic sheet cutting with laser cutting machine and carryout necessary molding and buffing, smooth finishing for all corner, diamond setting and providing necessary dust proof arrangements as required before fitting by manually. The fitting of LED letters on 4/5mm thick acrylic sheet or 3mm ACP base including fixing with the help of adhecive (chlroform) and necessary GI nut, bolt & screws complete all as specified and as directed.

Material and labour for making drawing with computer art work and letters, figure, writing work, scanning etc in approved colour print LED letters/Alphabet "A" to "Z" and numeric "0" to "9" as required at site in 300mm height and not less than 250mm with depth and base (back side) not less than 75mm made by 3mm thick /transparent/clear Acrylic sheet and 3mm white glow sheet all sides with computerized laser cutting from Laser Cutting Roughter machine and molding with molding machine and necssary hot pasting for the shape and size. Front side cover made of 3mm thick Coloured Acrylic sheet cutting with laser cutting machine and carryout necessary molding and buffing, smooth finishing for all corner, diamond setting and providing necessary dust proof arrangements as required before fitting by manually. The fitting of LED letters on 4/5mm thick acrylic sheet or 3mm ACP base including fixing with the help of adhecive (chlroform) and necessary GI nut, bolt & screws complete all as specified and as directed.

Material and labour for making drawing with computer art work and letters, figure, writing work, scanning etc in approved colour print LED letters/Alphabet "A" to "Z" and numeric "0" to "9" as required at site in 150mm height and not less than 125mm with depth and base (back side) not less than 75mm made by 3mm thick /transparent/clear Acrylic sheet and 3mm white glow sheet all sides with computerized laser cutting from Laser Cutting Roughter machine and molding with molding machine and necssary hot pasting for the shape and size. Front side cover made of 3mm thick Coloured Acrylic sheet cutting with laser cutting machine and carryout necessary molding and buffing, smooth finishing for all corner, diamond setting and providing necessary dust proof arrangements as required before fitting by manually. The fitting of LED letters on 4/5mm thick acrylic sheet or 3mm ACP base including fixing with the help of adhecive (chlroform) and necessary GI nut, bolt & screws complete all as specified and as directed.

M&L for MS stand for LIFT UNDER REPAIR (Men at work) Board (Folding type) made by MS Square pipe (Hollow pipe) inclding two coat of synthetic enamel paint over a coat of red oxide primer best quality. Lift Breakdown boade made by ACP with fixing and pasting of rectro reflection self adhesive board of sine with lamination & writing matter of lift UNDER REPAIR with stand of size 300mmx300mm base and 75mm-150mm total height as directed by Engr-in-Charge.

Taking down LED Display board by disconnecting of electric connection (for running display boards such as `Keep area clean & green , save water , Save Electricity , Safe live & safe Drive and Online MES Complaint Number' etc and carryout Computerised Programming by connecting with laptop and refixing the same after all above programmming and reconnecting complete as directed by Engr-in Charge.

Taking down LED sign board by disconnecting of electric connection, from its base and carryout thorough servicing of LED letters, properly opening of Electric connection of alphabets, arrows and dashes then thoroughly cleaning with chemical wash and reconnecting & refixing the same in its original location complete all as specified and as directed

Supply, fixing and testing SMPS (switched mode power supply) for single colour LED display Board, input AC 240 V and output DC 05/12 Volt, 10 to 60 Amps including connection, complete all as specified and as directed. Make :- Zebronics/ADS/Foxing/MX

Supply, fixing and testing SMPS (Switched Mode Power Supply) for multi colour LED display Board, input Ac 240 V and output DC 05 Volt, 40 to 60 Amps including connection, complete all as specified and as directed. Make-Zebronics/ADS/Foxin/MX

Supply and fixing for memory card for multi colour LED running display Board, with computerized programming via software done through laptop/desktop, complete all as specified and as directed .

Supply and fixing for memory card for single colour LED running display Board, with computerized programming via software done through laptop/desktop , complete all as specified and as directed.

Supply and fixing for jumper for single colour LED running display Board including necessary connections with 2.5sq mm copper wire complete all as specified and as directed

Supply and fixing for jumper for Multi colour LED running display Board including necessary connections with 2.5sq mm copper wire complete all as specified and as directed

Supply and fixing for multi colour LED block (consisting of 512 Nos LEDs) of size 10" x 5" x 1/2 " thick complete all as specified and as directed.

Supply and fixing for single colour LED block (consisting of 512 Nos LEDs) of size 12.5" x 6.5" x 1/2 " thick complete all as specified and as directed.

Connection of LED letters for each boards at the height of 22 mtr from GL with 100 V grade PVC insulated 1.5 sq mm copper flexible wire single core multistrtand for each letter of each board to power supply and then power supply from nearest MCB enclosure box including connection and testing complete complete all as specified and as directed.

M& L for frame work made of M.S. Round/square pipe, M.S. Angle, F.S. Flat duly cut into shape, drilled, welded etc including painting with 2 coats of synthetic enameled paint over a coat of red oxide metal primer complete all as specified and as directed.

S & F ACP Board 4mm thick with pasting of retro reflection self adhsive sheet with lamination duly cut into shape as per the M.S. Frame including writing matter as per direction of Engr-in-chrge complete with fixing on existing M S frame with aluminium Pop type rivets and covering the edges with 0.5mm thick aluminium angles/channels as per requirement at site and carryout necessary painting to MS frame work to prevent the same from rusting all as directed.

M & L for MS angle for Road Demercation board of size 1220mmx910mm made by 50mmx25mmx18 SWG MS hollow of which includes the stand made by MS angle of size 40x40x6mm and fixing of Rectro Reflector venyl shet of 0.25mm thick with suitable nut, bolt with washer etc and two coats synthetic enamel paintover a coat of red oxide and fixed in ground with proper PCC foundations with good finishing complete all as specified and directed.

Material and labour for water cooler replacement of 80/100 mfd 415 V Starting capacitor for AC/ water cooler. (Make : Sarda/Universal/Tibcon)

Material and labour for replacement running capacitor 10 mfd for Water Cooler of capacity 80/ 150 ltrs. (Make : Sarda/Universal/Tibcon)

Material and labour for replacement of 15mm bore chromium plated push cock suitable for water cooler of any capacity as per existing specification. (Make- any ISI marked)

Material and labour for replacement of Thermostat switch for water cooler. (Make : Indfoss /Danfoss/Ranutrol)

Material and labour for replacement of Ball PTMT valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 15 mm complete all as specified and directed. (Make - Prayag/Polytuf/Stec)

Disconnecting defective sealed compressor unit of Water Cooler 80/ 150 ltrs capacity from the water cooler and fixing of new compressor of same specification in original position all as specified and as directed. (Make- Kirloskar/SP/RAM/Tecumsh)

Material and labour of Door gasket for 150 ltrs capacity Water Cooler

Material and labour of Door gasket for 80 ltrs capacity Water Cooler

Material and labour for Starting Relay suitable for water cooler 80/ 150 ltrs capacity (Make- Ranutrol/Elkay/Real Life/Uxcell)

Material and labour for replacement of Overload protector suitable for Water Cooler of capacity 150 ltrs

Material and labour for replacement as in repair of Overload protector suitable for Water Cooler of capacity 80 ltrs

Material and labour for replacement of Starting relay box type for Refrigerators of capacity upto 315 ltrs. (Make- Ranutrol/Elkay/Whirlpool/Uxcell)

Material and labour for replacement of copper Capillary tube of size 0.36 mm for Refrigerators of capacity upto 315 ltrs.

Material and labour for replacement of Cooling coil for Refrigerators of capacity upto 315 ltrs.

Material and labour for Freezer door for Refrigerators of capacity upto 315 ltrs

Material and labour for replacement of Thermostat switch for Refrigerators of capacity upto 315 ltrs. Make- Ranutrol/Indfoss/Kelvinator

Material and labour for Chill tray for Refrigerators of capacity upto 315 ltrs.

Disconnecting defective condenser coil of Refrigerators upto 315 ltrs capacity and replacing the same with new condenser coil and fixing in original position as per existing specification and size complete all as specified and directed.

Material and labour for Inner lights filament type/LED for Refrigerators of capacity upto 315 ltrs

Disconnecting defective sealed compressor unit of Refrigerators upto 315 ltrs capacity and fixing new hermitcially sealed compressor unit of same specificationas fixed in original position all as specified and as directed.

Material and labour for Door switch for Refrigerators of capacity upto 315 ltrs

Material and labour for replacement of 5 Amps 3 pin 230 Volts Plug Top Make : Anchor/gold medal/havells/standard

Material and labour for AO split/window AC Dismantling the cover of Condensor and cooling coil, thoroughly cleaning the external surface (both side) of all the component including fins, base , discaling chemicals, water etc with the help of air blower, wire brushing water jet pump etc and reassemble all the components plate, runner, fan blade etc in original position as and when directed for following capacity of Air Conditioners: -

Split type Air Conditioner of capacity 1.5 TR

Split type Air Conditioner of capacity 2.0 TR

Split type Air Conditioner of capacity 3.0 TR

Material and labour for Dismantling the cover of Condensor and cooling coil, thoroughly cleaning the external surface (both side) of all the component including fins, base , discaling chemicals, water etc with the help of air blower, wire brushing water jet pump etc and reassemble all the components plate, runner, fan blade etc in original position as and when directed for Window type AC of capacity 1.5 TR

Supply and fixing of AC single phase 230 Volts contactor assembly for 1.5/ 2.0 TR capacity split AC condensing unit of (Make : carrier/ Voltas/ LG/ Amtex) complete all as specified and as directed.

Material and labour for repair of AC single phase 230 volt Printed Circuit Board for 1.5/ 2.0 TR capacity split type AC cooling unit of (Make : carrier/Voltas/LG/Amtex) complete all as specified and as directed.

M&L for replacement of AC single phase 230 volts remote control unit (Hand set) for 1.5/ 2.0 TR capacity for split type AC of carrier/Voltas/LG/Amtex complete all as specified and as directed by the Engr-in-Charge.

Re-winding Blower motor, including replacement of bushes, with same size and gauge of super enamelled copper wire for Split type AC 1.5 TR capacity (Condensing unit) complete all as specified and as directed.

Re-winding Blower motor including replacement of bushes with same size and gauge of wire for Split type AC 2.0 TR capacity (Condensing unit) complete all as specified and as directed.

Re-winding Blower motor including replacement of bushes with same size and gauge of super enamelled copper wire for Split type AC 1.5/ 2.0 TR capacity (Cooling unit) complete all as specified and as directed.

Re-winding Blower motor including replacement of bushes with same size and gauge of super enamelled copper wire for Window type AC1.5/ 2.0 TR capacity complete all as specified and as directed.

Material and labour for replacement of Strainer for Split/ Window Type AC of any capacity.

Material and labour for replacement of 4 mfd capacitor for blower moter of AC of any capacity. Make: Sarda/ Universal/Tibcon motor

Material and labour for replacement of 6 mfd capacitor for blower moter of AC of any capacity. Make: Sarda/ Universal/Tibcon motor

Material and labour for replacment of 36 mfd running capacitor of any capacity. Make: Sarda/ Universal/Tibcon motor

Material and labour for replacment of 40 mfd running capacitor of any capacity. Make: Sarda/ Universal/Tibcon motor

Material and labour for replacment of 50 mfd running capacitor of any capacity. Make : Make: Sarda/ Universal/Tibcon motor

Material and labour for replacement of 100-120 mfd Starting capacitor of any capacity. Make: Sarda/ Universal/Tibcon motor

Material and labour for replacement of Thermostat switch for 1.5 TR capacity Window Type AC complete all as specified and as directed. Make: Danfos/Indfos/Ranutrol

Material and labour for replacement of Sensor for 1.5/ 2.0 TR capacity Split type AC complete all as specified and as directed.

Material and labour for Fan Blade for 1.5 TR capacity Window type AC.

Material and labour in repair of Fan Blade for 1.5/ 2 TR capacity Split Type AC for condenser unit.

Material and labour in repair of 1/5 HP Blower motor complete all as specified and as directed. Make : American universal/ Air cool

Material and labour for replacement of Over load protector for Window/ Split Type AC of capacity 2 TR complete all as specified and as directed.

Material and labour for replacement of Over load protector for Window/ Split Type AC of capacity 1.5 TR complete all as specified and as directed.

Material and labour for replacement as in repair of Capillary copper tube of size 0.064 inch dia complete all as specified and as directed.

Material and labour for replacement as in repair of Runner for 1.5/ 2.0 TR Window Type AC complete all as specified and as directed.

Material and labour for replacement as in repair of Runner for Indoor unit of 1.5/ 2.0 TR Split Type AC complete all as specified and as directed.

Material and labour for replacement as in repair of Starting Relay for window/ Split type AC of capacity 1.5/ 2.0 TR complete all as specified and as directed. Make- Ranutrol/Amazor/Elkay/Real life/Uxcell

Material and labour for replacement of Front grill for 1.5 TR Window Type AC complete all as specified and as directed.

Material and labour for replacement of Air filter for 1.5 TR Window Type AC complete all as specified and as directed.

Material and labour for replacement of Base tray for Window Type AC of 1.5 TR capacity complete all as per existing specification and all specified and as directed.

Material and labour for replacement of 16 Amps, 3 pin, 240 Volts Plug top complete all as specified and as directed. Make : Anchor /Havells/Standard/Gold Medal

Material and labour for replacement of Plug top for socket of capacity upto 30 Amp complete all as specified and as directed..

Supply and fixing as in repair of rotary type compressor for window/ Split type AC of capacity 2.0 TR complete all as specified and as directed by the Engr-in-Charge. Make- Godrej/Tecumush/Kirloskar/Hitaichi/LG

Disconnecting defective sealed receprocating type compressor unit of 2.0 TR Split/ Window/ Package type AC from the system and fixing repaired/ reconditioned sealed unit compressor in original position all as specified and as directed.

Supply and fixing of rotary type compressor for window/ Split type AC of capacity 1.5 TR complete all as specified and as directed by the Engr-in-Charge.

Disconnecting defective sealed receprocating type compressor unit of 1.5 TR Split/ Window/ Package type AC from the system and fixing / reconditioned sealed unit compressor in original position all as specified and as directed

Supply and laying out of copper pipe (hard) 5/8" dia with PUF insulation as per required length at site complete with flaring nuts of suitable size (brass) all as specified and as directed by the Engr-in-Charge.

Supply and lay of copper pipe (hard) 3/8" dia with PUF insulation as per required length at site complete with flaring nuts of suitable size (brass) all as specified and as directed by the Engr-in-Charge.

Supply and laying of copper pipe (hard) 1/4" dia with PUF insulation as per required length at site complete with flaring nuts of suitable size (brass) all as specified and as directed by the Engr-in-Charge.

Supply and lay of copper pipe (hard) 1/2" dia with PUF insulation as per required length at site complete with flaring nuts of suitable size (brass) all as specified and as directed by the Engr-in-Charge.

Material and labour for taking out and dismantling the existing rusted unserviceable condenser coils from the existing system of 1.5/ 2.0 TR capacity of Window type / split type AC unit after decanning refrigerent gas from the system to empty cylinder, disconnecting all electrical connection, flair nuts, valves and shut down all preventive valves properly, supply and replacing with new condenser coils as per existing size and specification including necessary fixing arrangement and connect all electrical and safety protection devices to the existing system and flushing the whole system by nitrogen, leak testing by 200 PSI nitrogen pressure holding of 48 hours, charging of decanning refrigerent to the system and charging of additional refrigerent as required, commisioning and testing complete all as specified and as directed by the Engr-in-Charge.

M & L for Cleaning the cooling coil and condensor with the help of compressed Nitrogen inner side of the copper tube for flushing out all sludge and oil deposited in the copper tube and materials and labour for charging of refrigerant as required including replacement of strainer and finding out the leakage, brushing the same, testing for window/Split AC of 1.5/2.0 TR complete all as specified and as directed by the Engr-in -charge

Material and Labour for disconnecting defective indoor unit of split AC capacity 2 TR and replacing the same with new indoor unit in position fixing in original position as per existing and compaitable to existing make complete all as specified and as directed.

Material and Labour for disconnecting defective outdoor unit of split AC capacity 2 TR and replacing the same with new outdoor unit including compressor in position fixing in original position as per existing and compaitable to existing make complete all as specified and as directed.

Material and Labour for disconnecting defective indoor unit of split AC capacity 1.5 TR and replacing the same with new indoor unit in position fixing in original position as per existing and compaitable to existing make complete all as specified and as directed.

Material and Labour for disconnecting defective outdoor unit of split AC capacity 1.5 TR and replacing the same with new outdoor unit including compressor in position fixing in original position as per existing and compaitable to existing make complete all as specified and as directed.

Supply and fixing MCB protected Power Unit with 16 - 25 Amp MCB, Motor Starter, Socket and Plug Top with indicating light of (Make: North West/ Havells /Anchor)

Material and labour for charging of Refrigerant of suitable type (CFCbased/Non CFC Based) in Split/ Window AC, Water Cooler and Refrigerator complete all as specified and as directed.

S & Fixing PVC pipe of size 25 mm including all acessories like tee,bend etc for water drain out line dually clamped on wall as driected by engg-in-charge.

S & Fixing PVC pipe of size 22 mm including all acessories like tee,bend etc for water drain out line dually clamped on wall as driected by engg-in-charge.

ELECTRO FREEZE

RADHA ENTERPRISE