REPAIR / REPLACEMENT OF FLOORING, TILING, WALL PANELLING, CEILING RELATED ITEMS BLDGS OF AREA II UNDER AGE B/R (CENTRAL) AT GE (WEST) COLABA, MUMBAI

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean raddius built in CM 1:6 all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron all as specified and directed..

Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed.

Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed..

Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a down ward angle of 45 degree at 150 mm center to center and sealing the same all as specified and directed..

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg above five Up to Eight floor.

M&L for Old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-30mm thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including three coat of white wash all as specified and as directed by Engr-in-Charge. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make..

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make..

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs above five to eight stories, all as specified and directed. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make..

M&L for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall (internal surface) and finished surfaces even and smooth without using extra cement all as specified and directed. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make..

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE .

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from fifth floor upto eight storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish 0f the premises outside of MoD land all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, etc. laid bedded and pointed in any mortar all as specified and directed.

M&L for first and premium quality vetrified coloured marble finished digital tiles 1200 mm x 600 mm x 9 mm to 10 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / vermora, Sample as approved By GE.

M&L for machine cut kota stone slab flooring 20-25 mm thick (bull nosing with three antiskid grooved) in one pice over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish including screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

M&L for machine cut kota stone slab flooring 40-50 mm thick (bull nosing with three antiskid grooved) in one piece over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

Material and Labour for heavy duty outdoor stonegres plus design vitrified tiles any shade size 600 x 1200 x 12 mm thick polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

M&L for first and premium quality of non skid, joint free ceramic “coloured” tiles of size 400 x 400 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Euro, Sample as approved By GE.

M&L for first and premium quality of non skid, ceramic “coloured” tiles of size 400 x 400 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm x 8 mm to 9 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified double charged tiles, any shade size 600 x 600 x 9-10 mm thick (square/ rectangular), polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified double charged tiles of any shade, size 600 x 600 x 9-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for glazed ceramic exterior wall tiles 6 to 8 mm thick not exceeding 0.36 sqm etc set & jointed in cement and pointed in coloured cement to match the shade of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Johnson (Endura) or equivalent in Kajaria/ Euro tiles, sample as approved by GE

M&L heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

M&L in repair for 8 mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring in a flating glue less click locked & sealed flooring similar to a jigsaw puzzle. In this method, the individual planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed.Approved samples as kept in GE Office.

M&L for Granite stone slab of best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed

M&L for full molding to granite slab edges as directed by Engr-in-charge including polishing all as specified and directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

S&F for Solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on the PVC frame all as specified and directed Make : Rajshree/ Navratan or equivalent, sample as approved by GE

S&F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed Make : Rajshree/ Navratan or equivalent, sample as approved by GE

M&L for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM)respectively including aluminum angle 25x25x 1.4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coat of synthetic enamel paint over a coat of primer on wooden surface all as specified and directed by Engineer-in-Charge.

M&L for providing POP Cornices 100 mm wide of required design as approved by GE

S&F 12 mm thick plywood, grade BWR type BB fixed with brass screws and cups to timber frame work all as specified and directed. Sample as approved by GE

S&F for 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instructions to plywood work all as specified and directed. Sample as approved by GE

S&F for plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm all as specified and directed. Sample as approved by GE

S&F in repairs powder coated aluminium sections for framing, partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed

S&F in repairs 3-4 mm thickness 3D wall stickers fixed with adhsive and manufactures instruction as in ceiling/coloumns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

S&F in repairs 12 mm thickness fluted WPC indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specifications including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) M&L for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) S&F E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L for french polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surfaces and a coat of wood filler with two or more coats all as specified and directed..

M&L for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surfaces, with two or more coats all as specified and directed..

M&L for collection of debris in a truck laying at various locations in the area under AGE B/R (Central) and removing the same (old dismantled/demolished construction materials) outside MoD land to a distance upto 25 KM in the truck of capacity 5 to 6 cum each all as specified and directed. Note: (a) All precautions to be taken by all workers while lifting debris laying at various locations. (b) After removing of debris, vehicle will be contractors' property. (c) Contractors accredated representative shall be available during removing of debris. (d) Complete process shall be completed in all respects within a day.

Frends Enterprises

RUPESH CONSTRUCTION CO

Ganesh Enterprises

Nilesh Construction

SAI SIDDHI CONSTRUCTION

K.C.P ENTERPRISES

SHREE JAGDISH FURNITURE CO.

vikas construction

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

Bidder Name

Unitech Enterprises

Frends Enterprises

K.C.P ENTERPRISES

Nilesh Construction

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

vikas construction

Ganesh Enterprises

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION

RUPESH CONSTRUCTION CO