Estimate for Installation of Gates and Gearing System at Head Regulator of Mauzam Minor

Amount

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 12 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/20)

Supply, Providing and fixing of Stainless steel Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 1.5 Ton capacity

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55mm dia

Supply and fixing of spindle cover

Providing & fixing clamp plate, complete in all respects.

Providing Gate wheel assembly complete in all respects to entire satisfaction of engineer-in-charge up to 100 mm dia.

Removing, & fixing of roller pin in position complete in all respects and to entire satisfaction of Engineer-in - charge.(upto 75mm)

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Removing, providing and fixing ISMB 100 x 50

Providing and fixing ISA 75 x 75 x 8mm

Providing and fixing Skin Plate 10mm

Providing and fixing ISMC 100*50 mm

Providing and fixing MS Plate 100x 12mm

Removing, assembling and fixing in position GUN metal bush complete in all respect and to the entire satisfaction of Engineer in charge

Providing and fixing M.s Plate i.e Stiffner Plate, Batten Plate , Top Base Plate, Bottom Base plate, Ladder base plate Etc

Providing and fixing ISMB 125

Providing and fixing of new chequred plate 8mm.

Providing and fixing 32 Nb Pipe

Providing and fixing 25 mm Bar

Providing and fixing ISA 50 x 50 x 6 mm

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Providing and Fixing Stainless Steel Flat 35x4mm

Providing and Fixing Fischer Bolts (Size 16x300mm )

Providing and Fixing Stainless Steel Flat (100*8 mm)

Providing and Fixing J Anchor Bolt OD 16 x 360 Length

Cement Pointing 1:3 Deep Variety

Providing and fixing ISMB 250 x 125 mm @ 37.30 Kg/Mtr

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR item no. 10.16)

Supply, Providing and fixing of Galvanized Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Providing and fixing ISMC 125 X 65

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

RAKESH KUMAR GOVT CONT

THE VIJAY COOPERATIVE L AND C SOCIETY LTD

The Baba Bhai Roop Chand Co Op L and C Society Ltd.