REPAIRS TO HARDSTANDING, FOOTPATH, COMPOUND WALL AND FENCING ETC AT INHS ASVINI

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing debris out side MD land. Note: The place of disposal shall be find out by the contractor.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in subbase and finished fair and even complete as directed by Engineer-in- Charge.

M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in subbase and finished fair and even complete as directed by Engineer-in- Charge.

Dismantling interlocking paver block, stone slabs, chequered tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed including removal of rubbish out side MD land Note: The place of disposal shall be find out by the contractor.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry as in floors, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for providing 60 mm thick coloured precast cement concrete interlocking paver blocks any shape,size and pattern conforming to IS: 15658-2006 with grey cement and pigment of grade M :35 and laid over and including 50 mm thick sand cushioning and compacted using vibrator and edges sealed with PCC 1:2:4 type B1 as directed by Engineer-in- Charge.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in kerbs, rounded or chamfered on edges including necessary form work complete all as specified.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in copings, lintel, bands etc including weathering slightly rounded or chamfered angles and throating and form work all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished fair and even completed all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

S&F MS angle iron as in posts or struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessory drilling, bolting or riveting etc.conforming to Fe-410-0 or Fe-310-0 and embedding post in concrete complete all as specified.

S & F in repairs concertina coil fencing 610mm dia of short profile including core wire dia 2mm and pitch between barb 24mm and tape 0.5mm thick including cutting, fixing, welding, rebating etc complete all as specified.

S&F GI Chain link fencing including line wires, not less than 3mm dia , any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of GI binding wire

M&L Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally and fixing chain link fencing to steel posts with and including GI wire not less than 0.90 mm dia or securing with clips, grade of bars Fe-410-W (Gde E-250) quality-A of Fe-290 (Gde-E-165) complete all as specified.

S&F MS tubes 50mm to 75mm bore as posts or struts, in any position including necessary drilling, bolting or riveting , welding etc complete all as specified

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S & F in repairs stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/e fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in?charge, Note - For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

M&L for 40 mm thick PCC 1:2:4 type B1(using 20 mm graded stone aggregate) in floors, surfaces finished even & smooth without using extra cement.

S&F glass dividing strips 3 mm thick and 38 mm wide and inserted in position to conform to design complete all as specified

Angrahit Services Trading Co

BOB ENTERPRISES

Vandan Enterprises

SN CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

SAHU AND SAHU CO.

jkconstruction

N F ENTERPRISES

SAHI SAGAR ENTERPRISES