RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Biomedical Waste Treatment System With Shredding & Sterilization ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Standards Biomedical Waste Treatment system shall be with Shredding & Sterilization suitable for Waste category as per Bio- Medical Waste Management Rules Yes * 1/6 2016 Material of the Rotary Cuters/Dics shall be confirming to Steel Grade per IS 7494 :1981 latest Amendment Yes * Material of the fixed cutters shall be conforming to steel grade per IS 1762:1974 latest amendment Yes * Electrical Safety requirement shall be as per IS 302-1:2008 latest amendment Yes * Performance Parameters Type of waste that can be treated by Shredder as per Bio-Medical Waste Management Rules
Required2016 Microbiology & biotechnology waste
RequiredWaste Sharps and Solid waste (Red category) * Number of Rotary Cutters/Discs 18 * Number of Fixed Cutters 2 * Maximum RPM of the cutter (RPM) 30 * Number of Rotating Shafts (s) 2 * Hardness of shaft (HB) 162 * Tensile strength of shaft (Mpa) 545 Above 520 Gear Box for speed reduction Single Speed gear box Single Speed gear box Cycle time required in hours to complete process of shredding and sterilization 1 1 Maximum capacity of machine in the cycle time required for complete process of shredding and sterilization in kg 2.5 2.5 Time period for Sterilization in autoclave in minute 30 30 Maximum Noise of the Machine without waste 40 * 2/6 material as per IS 12065:1987 latest amendment (dB) Capacity of the waste collection Trolley or bin (L) 30 30 Trolley or Bins to collect waste to be provided Yes Yes Over load Protection System provided Yes Yes Switch to reverse cutter rotation provided Yes Yes Source of power supply Three Phase 440 V
Required50 Hz Three Phase 440 V
Required50 Hz Horsepower(hp) of motor 2.5 hp 2.5 hp Availability of Short Circuit protection system Yes * IP rating of the machine 55 55 Availability of Power Cut-off upon opening of Shredding chamber door/access Yes * Waste Loading Method to Chamber Manual Manual Maximum temeperature of autoclave in Degree Celsius 138 138 Maximum pressure of autoclave in psi 36 36 Warranty (with free spare parts and free service) in year 2 2 Number of preventive maintenance visits during warranty period(Number per Annum) 4 3
Required4
Required5 Comprehensive Maintenance Contract (CMC) which includes preventive 3 3 3/6 maintenance including testing & calibration as per technical/service operational manual
Requiredabour and spares
Requiredafter satisfactory completion of Warranty period Operating temperature and humidity 10-50 degree and relative humidity of 15-90% * Type of driver motor Induction motor * Material Parameters Material for Rotary cutter 40 Cr4Mo3 40 Cr4Mo3 Material for Fixed cutter HCHCr HCHCr Material of the Shaft Steel Alloy Steel Alloy Enclosure material MS MS Dimensional Parameters Size of Loading Chamber Opening (mm x mm) 315 * Size of Shredding chamber (Length X width x x Height) (mm x mm x mm) 220 * Weight of Shredder in kg 40 * Additional Parameters Additional Safety Features - * Automatic Door Opening by HMI (Human Machine Interface) Yes Yes Inbuilt Boiler with Shredder Yes Yes Auto Cooling system provided Yes Yes Inbuilt Printer provided Yes Yes USB port provided Yes Yes Facility of Automatic Report generated after completion of Cycle Yes Yes Main cable with power socket of standard Indian Yes Yes 4/6 make to be provided Demonstration of equipment and technical training for personnel involved in the use and handling of the equipment on site at the buyer/consignee end immediately after its installation Yes Yes Shredder material frame must be Rust Proof Yes * Product instruction manual shall be supplied Yes * Standard Tool Kit for maintananace and Trouble Shooting to be provided Yes * Reports Certification for the Product CE * Certification Number and date to be indicated - * Manufacturer should have ISO certification for quality standards (Manufacturer must Certified to ISO 9001:2008 or latest) Yes Yes ISO certification date and number (if no ISO provided then put NA) - * Product should be certified by NABL ILAC/Govt Labs accredited laboratory for IS 302 electrical safety requirement Yes Yes Certification date and number
Requiredand if no certification provided please put NA - * Copies of reports and certifications to be furnished to buyer on demand at time of supplies Yes Yes 5/6 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
