Work for Land Record Society office along with HVAC and Allied works at Govt. Press Building, Hoshangabad Road, Bhopal

Amount

WOODEN VENEER FALSE CEILING-Providing and fixing false ceiling at all height with 12mm thivk MR grade ply board including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 600 gms/sqm as per IS : 277 and consisting of anglecleatsof size 25 mm wide x 15 mm thick with flanges of 22mm and 37mm,at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40mm long with 6mmdia bolts other flange of cleat fixed to the angle hangersof 25X25X50mm of required length , and other end of angle hanger being fixed with nuts and bolts to G.I. channels 45X15X0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mmthick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing the plyboard with ceiling section and perimeter channels 0.5 mm thick 27mmhighhavingflanges of 20mm and 30mm long,the perimeter of ceilingfixed to wall/partition with the help of rawl plugs at 450mmcentre,with 25mmlong drywall screws @ 230mm interval, including fixing of 12mm plyboard sheet to ceiling section and perimeter channels with the help of dry wall screws of size 3.5x25mm at 230mm interval including jointing and finishing to a flush finish of tapered and square edges of plyboard including the cost of making openings for light fittings, grills, diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing, specifications and direction of the Engineer-in-charge.

PARTITION - LAMINATE-Providing and fixing 70mm thick partition which includes 8mm MR commercial Plywood from both side screw fixed with drywall screw of 25mm to 30 mm center to either side of 48 mm studes (0.5mm thick having one flange of 34mm and another flange of 36mm made of G.I. steel) placed at 610mm center in 50mm floor and ceiling channel (0.5mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600mm center to center. Partition to be finished with 1 mm thick laminate complete. All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition or as per direction of Engineer-in-charge.

PARTITION - VENEER-Providing and fixing 70mm thick partiotion which includes 8mm MR commercial Plywood from both side screw fixed with drywall screw of 25mm to 30 mm center to either side of 48 mm studes (0.5mm thick having one flange of 34mm and another flange of 36mm made of G.I. steel) placed at 610mm center in 50mm floor and ceiling channel (0.5mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600mm center to center. Partition to be finished with 4 mm thick teak veneer of approved shade duly melamine polished complete. All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition or as per direction of Engineer-in-charge. Basic Rate of Veneer - Rs. 1100 Per Sq.Mtr.

PARTITION - VENEER & LAMINATE FINISH-Providing and fixing 70mm thick partiotion which includes 8mm MR commercial Plywood from both side screw fixed with drywall screw of 25mm to 30 mm center to either side of 48 mm studes (0.5mm thick having one flange of 34mm and another flange of 36mm made of G.I. steel) placed at 610mm center in 50mm floor and ceiling channel (0.5mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600mm center to center. Partition to be finished with 4mm thick teak veneer duly melamine polished & other side with 1 mm thick laminate complete. All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition or as per direction of Engineer-in-charge. Basic Rate of Veneer - Rs. 1100 Per Sq.Mtr.

WALL HUNG DISPLAY- Providing and fixing of wall hung display pannel of size 1200 X 750 mm

SOFT BOARD-Providing and fixing soft board panels on walls/partiotion/panelling in the area indicated in the drawing. 12mm thick soft board with backing of 8mm thick ply. Soft board panel shall be finished with approved fabric Rs. 200/- RM All exposed wooden members to be finished in Melamine polish, in approved shade. Rate shall include fixing the whole panel in the space earmarked fir the same as per the drawing and as per the direction of architect.

PANELING ON WALL - VENEER FINISH-Providing and fixing paneling on wall, on G.I hat furring channel 22-25 depth with grid size 600 X 600 mm both ways and fixed to walls,columns, in any profile and covered with 8mm plywood of approved make and finished with 4 mm thick veneerduly polished as on exposed faces with grooves as per design. All exposed wooden members to be finished in Melamine polish, in approved shade. The rate shall includes all hardware, fittings, adhesives, beadings, lipping etc. as directed by the architect. Basic Rate of Veneer - Rs. 1100 Per Sq.Mtr.

PANELING ON WALL - LAMINATE FINISH-Providing and fixing paneling on wall, on G.I hat furring channel 22-25 depth with grid size 600 X 600 mm both ways and fixed to walls,columns, in any profile and covered with 8mm plywood of approved make and finished with 1 mm thick laminate as approved on exposed faces with grooves as per design. All exposed wooden members to be finished in Melamine polish, in approved shade. The rate shall includes all hardware, fittings, adhesives, beadings, lipping etc. as directed by the architect

SOUND ABSORBING PANELING ON WALL-Providing and fixing sound absobing wall paneling in profile on wall,(the panel should be levelled) frame of G.I hat furring channel 22-25 depth with grid size 600 X 600 mm. The entire wal paneling will be fixed and covered with 20mm wood wool board of high quality and as approved by architect and finished with 350-400 GSM PILE WT carpet/fabric (color, shade, texture to be approved by the architect) paste with approved adhesive. Note : The junction of the carpet should meet evenly with accurate workmanship and to the satisfaction of the architect. Rate to include cutting and making provision for housing light fixtures, conduiting and electrical fixtures as per the drawing and as directed by the architect. Basic rate of carpet is Rs. 450/- Per Sqm

TEAK WOOD/RUBBER WOOD SKIRTING-Providing and fixing 1st class Teak wood/rubber wood skirting wherever required as per carved profile of size 75mm Wide X 15mm Thick duly melamine polished. Fixing detail as per drawing and as directed by the architect.

TEAK WOOD/RUBBER WOOD BEADING-Providing and fixing 1st class Teak wood/rubber wood beading wherever required as per carved profile of size 25mm Wide X 15mm Thick (max) or as peer profile duly melamine polished complete as per detail, drawing and as directed by the architect.

STORAGE WITH LAMINATE-Providing supplying and fixing at site Side and Back storage unit 450 deep made out of 18 mm thk ply board and back of the side unit is of 8mm ply, unit is provided with verticle and horizontal divisions as per design with drawers & shutters, lockable, with all hardware like hinges, tower bolt, magnetics catcher, lock of approved quality. The cabinet should be raised 75/100mm above ground. Inside exposed ply surfaces of the runner with putty finish, wood primer coats and finished with 3 coats of flat oil base color paint with specified shade. Exposed outside surface Laminated with standard grade laminate of approved design and make. All exposed edges finished with first quality T.W. beadings to be finished in 2 to 3 coats of melamine polish of approved shade. . Provision for cable boxes etc complete if required

STORAGE WITH VENEER-Providing supplying and fixing at site Side and Back storage unit 450 deep made out of 18 mm thk ply board and back of the side unit is of 8mm ply, unit is provided with verticle and horizontal divisions as per design with drawers & shutters, lockable, with all hardware like hinges, tower bolt, magnetics catcher, lock of approved quality. The cabinet should be raised 75/100mm above ground. Inside exposed ply surfaces of the runner with putty finish, wood primer coats and finished with 3 coats of flat oil base color paint with specified shade. Exposed outside surface veneer finish with melamine polish of approved colour and gloss in 3 coats of melamine finish over 3 coats of sealer as per best practice. All exposed edges finished with first quality T.W. beadings to be finished in 2 to 3 coats of melamine polish of approved shade. . Provision for cable boxes etc complete if required

CANTEEN LEDGE-Providing and fixing ledge made of 18mm thk. ply. Top made of 18mm thick rubber wooed top, levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube Chrome plated. fitted with 18mm rubber top or Glass Top - 12mm thick. The Under structure of table is made Up of SS 202 tube of 1.25mm thick. Approved Make- Godrej/ Featherlite/Wipro/ Bonton/ Methodex.

TOILET VENTILATOR-Providing and fixing of aluminium ventilators in toilet

RECEPTION TABLE-Providing & fixing double level table having an overall size of 3000mm W x 900mm D x 750+450mm H with top made of 19 mm plywood with 12 mm thick corian top & edges of the table also with corian. The base of the table shall be made out of 18 mm and 12 mm thick MR grade plywood with 4mm thick veneer as approved by the architect, including melamine polish in three coats of sealer and two coats of melamine. The polish shall be complete with staged sanding, filling etc. complete to give a perfectly smooth finish to the satisfaction of the architect. Item to be completed in all respects as per drawings & instructions including all hardware, legs, studs etc.

RECEPTION CHAIR-Low Back Chair Specification-Size-H:1000-1100mm, Seat ht: 460-560mm, D-600mm, W-590 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Five position Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion. Upholstery 0.50Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/Wipro/ Bonton/ Methodex.

VISITOR CHAIR - RECEPTION-Size:-Overall H: 830mm,Seat h: 460mm,D: 580mm,W: 535mm: Under Structure made of 19mm dia MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Seat and back are made of 12mm thick Hot pressed ply wood with high density PU foam, upholstered with fine quality fabric. Arms Tubular. Steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. Upholstery 0.6Mtr. Approved Make- Godrej/ Featherlite/Wipro/ Bonton/ Methodex.

CANTEEN TABLE-Width: 1200mm X 600mm X 750mm, 4 seater. Top made of 18mm thick rubber wooed top, levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube Chrome plated. fitted with 18mm rubber top or Glass Top - 12mm thick. The Under structure of table is made Up of SS 202 tube of 1.25mm thick. Approved Make- Godrej/ Featherlite/Wipro/ Bonton/ Methodex.

CANTEEN CHAIR-Overall Size : Width :430mm , Depth:558mm , Height: 860mm, Seat Height:475mm :Made of MS CRCA Tube Dia. 25 x 18 gauge with back rest tube of 9.5mm, duly Chrome Plated. Seat made of Ply 12mm With Cushion .Approved Make- Godrej/ Featherlite/Wipro/ Bonton/ Methodex.

EXECUTIVE TABLE -Table Size : L- 1500mmx W- 750mm x H-750mm. With Keyboard Tray, CPU Trolley. Desk Made of 25mm thick pre laminated partical board BSL, Leg fitted from Both ends with Verticle Aluminium profile of 40mm x 60mm half elipticle cross section As shown in Photograph. Appron 18mm pre laminated partical board BSL and Metal Duct at the top Size-100mm x 150mm x 0.8mm thick Cross Section. Top must be postformed 25mm thick Bull nose profile. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CHAIR LARGE BACK - CABIN-Size: Over all H: 1000-1100mm, Seat H: 460-560mm, D: 625mm, W: 580mm, 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry. High density Moulded PU cushion. Upholstery 0.85Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

VISITOR CHAIR - CABIN-Size:-Overall H: 830mm,Seat h: 460mm,D: 580mm,W: 535mm: Under Structure made of 19mm dia MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Seat and back are made of 12mm thick Hot pressed ply wood with high density PU foam, upholstered with fine quality fabric. Arms Tubular. Steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. Upholstery 0.6Mtr. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

EXTRA LARGE WORKSTATION TABLE -Table Size : L- 1800 mmx W- 600mm x H-750mm. With Keyboard Tray, CPU Trolley. Desk Made of 25mm thick pre laminated partical board BSL, Leg fitted from Both ends with Verticle Aluminium profile of 40mm x 60mm half elipticle cross section As shown in Photograph. Appron 18mm pre laminated partical board BSL and Metal Duct at the top Size-100mm x 150mm x 0.8mm thick Cross Section. Top must be postformed 25mm thick Bull nose profile. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

LARGE WORKSTATION TABLE - Table Size : L- 1350mmx W- 600mm x H-750mm. With Keyboard Tray, CPU Trolley. Desk Made of 25mm thick pre laminated partical board BSL, Leg fitted from Both ends with Verticle Aluminium profile of 40mm x 60mm half elipticle cross section As shown in Photograph. Appron 18mm pre laminated partical board BSL and Metal Duct at the top Size-100mm x 150mm x 0.8mm thick Cross Section. Top must be postformed 25mm thick Bull nose profile. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

WORKSTATION -Table Size : L- 1350mmx W- 600mm x H-750mm. With Keyboard Tray, CPU Trolley. Desk Made of 25mm thick pre laminated partical board BSL, Leg fitted from Both ends with Verticle Aluminium profile of 40mm x 60mm half elipticle cross section As shown in Photograph. Appron 18mm pre laminated partical board BSL and Metal Duct at the top Size-100mm x 150mm x 0.8mm thick Cross Section. Top must be postformed 25mm thick Bull nose profile. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CHAIR - WORKSTATION-Workstation Chair Low Back Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 1.5Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SIDE RUNNER-Runner-SDU with drawer Full Wooden Side Sliding Door Unit with 2 drawers overall Size- Height-750mm x Width-900mm x Depth-400mm, Superior Quality make lock. PVC handles, Door and Side and Back made of 18mm thick pre laminated partical board, With Top must be postformed 25mm thick postform top. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CLR OFFICE TABLE-C.L.R. OFFICER TABLE Overall size 2700mm x 1200mm x750mm with top made of 25mm PLPB and l2mm thick corian top & edges of the table shall also with corian. The table shall have 2 former module supported on steel vertical post of 65mm dia X l.6mm duly powder coated. The main table shall have understructure having verticals madeof 36mm thick particle board post formed legs supported with 32mm dia. steel studs duly powder coated and modesty made of l8mm thick particle board having decorative laminate on both sides. Footrest shall be made out of 18mm plywood frame work with 6mm top and shall be finished with 0.6mm thick laminate. Side unit- Side Unit having overall size 1310x500x750mm,- Made of 25 mm pLpB with 12 mm thick corian top & edges of the table also with corian. Side unit shall have understructure having verticals made of 12mm thick post formed and made of 18mm thick prelaminatedparticle board having decorative laminate. The side unit shall have a provision for keyboard openable space for cpu and a printer shelf and an open able shutter in 18mm PLPB as per Drawing. Back Unit- Back Unit having overall size 2700 mm x500mmx750mm with top made of 25 mm PLPB with 12imm thick corian top & edges of the table also with corian.Storage unit of size 2500x500x750mm shall have understructure having verticals made of 18mm thick prelaminated particle with 2 openable shutter storage and drawer fascia in PLPB 18mm thick verticle legs and glass as in drawing.Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

C.L.R. OFFIC HIGH BACK CHAIR-C.L.R. OFFICER HIGH BACK CHAIR Size: Height Overall/Seat - Max:1240/535mm, Min: 1160/455mm, Depth - 625mm, Width- 650mm : 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density PU cushion. Over all appearance of product as shown in picture. Available in only Black Latherite. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CLR OFFICE LOW BACK CHAIR-C.L.R. OFFICER LOW BACK CHAIR Size: Height Overall/Seat - Max:1105/510mm, Min: 1020/440mm, Depth - 660mm, Width- 660mm : 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density PU cushion. Over all appearance of product as shown in picture. Available in only Black Latherite. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

ROUND TABLE 1200mm DIA-Round table 1200mm dia Diameter 1200mm height: 750mm Top made of 25 thk and base structure in Plus shape made of 18mm .thk pre-laminated particle board. All edges covered with pvc edge beading. Fitted with floor levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube duly Powder Coated/ Chrome plated. fitted with 25mm Pre-laminated Particle Board top or Glass Top - 12mm thick. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

MEETING CHAIR OF CLR-Meeting Chair Specification-Size-H:1000-1100mm, Seat ht: 460-560mm, D-600mm, W-590 mm.5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Five position Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion. Upholstery 0.50Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SR. OFFICER TABLE/SIDE UNIT/BACK UNIT-Main Table/Side unit/Back Unit Overall Size : Table - Lenght-2100mm x Width-900mm x Height-750mm,Side runner -Width-900mm x Depth-450mm x Height-750mm,Back Runner- Width-1650mm x Depth-450mm x Height-750mm,Corner unit - Lenght-450mm x Width-450mm x Height-750mm,3Drawer Pedestal size- Width-450mm x Depth-550mm x Height-650mm, Table leg 50mm thick Box type made up of 12+12+25mm thick particle board with 0.6mm thick laminates. All top made up of 25mm thick MDF board with deco painted with 12mm thick glass top, pedestal made uo of 18mm thick PLPB with postform top. Back Unit outer door made of 18mm thick PLPB and middle door made of 6mm thick glass. All shelf and bottom made of 18mm thick PLPB top Product must be in compliance with drawing and as per architect instruction, Complete product mustbe knockdown type in construction. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SR. OFFICER HIGH BACK CHAIR-High Back Chair Size- H: 1230-1330mm, Seat H: 500-600mm, D-550mm, W-630mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is glass filled Nylon fitted with Mesh Cloth. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Five position Lockable synchrony tilt mechanism, with Single piece die castes PP arm rest adjustable with PU pad. Quality tapestry. High density Moulded PU cushion. Upholstery 0.85Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SR. OFFICER LOW BACK CHAIR-Low Back Chair Specification-Size-H:1000-1100mm, Seat ht: 460-560mm, D-600mm, W-590 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Five position Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion. Upholstery 0.50Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE TABLE 11 SEATER-Conference Table 11 Seater without chair Size:- Length:3975mm, Width:1200mm, Height: 750mm, C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Top made of 25mm thick Pre-laminated Particle Board. Edge beading of edges by Through Feed Machine. Dotted embossed cable Duct and Perforated steel modesty panel on visitor’s side .All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE CHAIR HIGH BACK-Conference Chair High Back Size: Total Height-1050-1150mm, Depth 600mm, Width-535mm Seat Height:420-520mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 2.0Mtr.Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE CHAIR LOW BACK-Conference Chair Low Back Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 1.5Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE TABLE 16 SEATER-Conference Table 16 Seater without chair Conference table over all size-L-4725mm x W-2100mm x H-750mm, Providing and fixing Conference room table in 25mm MDF postform top with 35mm Edge effect all around, base of Pre laminated particle board joint with the help of EPCO/HETTICH Fittings with 540mm x 750mm HT complete as per Design.( Only Top will be measured). Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE CHAIR PREMIUM HIGH BACK-Conference Chair Premium HI-back Size: Total Height-1070-1190mm, Depth 685mm, Width-590mm Seat Height:425-510mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry. High density Moulded PU cushion. Upholstery 1.5Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE CHAIR PREMIUM LOW BACK-Conference/ Reception Chair Premium Low-back Size: Total Height-810-895mm, Depth 685mm, Width-555mm Seat Height:425-510mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for center support and seat height adjustment. Telescopic ABS cover over steel column. Lockable center tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry. High density Moulded PU cushion. Upholstery 1.2Mtr. Over all appearance of product as shown in picture. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CONFERENCE CHAIR VISITOR-Conference Chair Visitor Size: Total Height-840mm, Depth 600mm, Width-575mm Seat Height:450mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. Seat and back covered with PP covers. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.2 Mtr. The overall appearance of the product shall be as per photograph.Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SOFA 3 SEATER DLUXE-Sofa 3 Seater Deluxe Specification- Size-H-870 mm, L-1940 mm, D-840 mm. Structure made of treated agro wood, fitted with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with premium quality PU cloth with help of stitching, where ever necessary. Tapestry- 06Mtr. Overall appearance as per photograph. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SOFA 2 SEATER DLUXE-Sofa 2 Seater Deluxe Specification- Size-H-870 mm, L-1450 mm, D-840 mm. Structure made of treated agro wood, fitted with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with premium quality PU cloth with help of stitching, where ever necessary. Tapestry - 05 Mtr. Overall appearance as per photograph. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

SOFA SINGLE SEATED-Sofa Signal seated cs-23 Specification- Size-H-870 mm, L-925 mm, D-840 mm. Structure made of treated agro wood, fitted with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with premium quality PU cloth with help of stitching, where ever necessary. Tapestry- 04 Mtr. Overall appearance as per photograph. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CORNER TABLE -Corner Table Size: Length: 600mm, Width: 600mm, Height: 450mm. Under Structure made of MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Top Made up from 18mm Pre-laminated Particle board/ 12mm clear float glass.Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CENTER TABLE-Center Table Size: Length: 900mm, Width: 600mm, Height: 450mm. Under Structure made of MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Top Made up from 18mm Pre-laminated Particle board/ 12mm clear float glass. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

COMPUTER TABLE FOR SERVER ROOM-Computer table-900x450x750 for Server room Size: Length:- 900mm, Width:-450mm, Height:-750 mm. C–Frame & tubular cold rolled close annealed steel structure. Fabrication involves only MIG/TIG & Spot welding . Top made of 18mm thick Pre-laminated Particle Board. PVC Edge beading of 2mm thick by Through Feed Machine. Electrical Cable Tray made of 0.6mm thk MS cold rolled close annealed sheet press formed 3 fold 115mm ht. Provision to run cable in legs. Drum Type Leveller. Metal keyboard tray and removable CPU stand. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

CHAIR FOR SERVER ROOM-Size:-Overall H: 830mm,Seat h: 460mm,D: 580mm,W: 535mm: Under Structure made of 19mm dia MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Seat and back are made of 12mm thick Hot pressed ply wood with high density PU foam, upholstered with fine quality fabric. Arms Tubular. Steel components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface. Upholstery 0.6Mtr. Approved Make- Godrej/ Featherlite/ Wipro/ Bonton/ Methodex.

WALLPAPER-Providing and fixing vinyl coated wall paper of approved brand and finish as per the architects specification including scaffolding cleaning etc., at all levels and location etc., complete as directed and approved by the architect. Basic rate of wallpaper Rs. 600/- Per Sq.Mtr.

BLINDS-Providing and fixing as per approved sample, 100mm wide verticle Fabric Blind of approved make(high quality) complete with hanging channel , sliding and tilting systems in ‘drawn’ position fabric vanes to overlap by minimum of 10mm ( every 1.0 mt running length to have at least 11 Nos 100mm wide fabric vanes )Length of blinds as mentioned in drawings bottom end to be at least 25 mm below horizontal surface. Fabric strip as that of fabric vanes , to be fixed on both side of aluminium top channel. Lower ends of the vanes to be weighed down and tied with each other on both corners, with ball chains. The fabric to be scothgaurd and sanitised (stain repellent) average thickness 0.8 mm, 100 % polysternon woven. Items to be completed in all respects including fixing with brackets onto wall or partition with rawl plugs complete as per the direction of architect Make-.Vista.

C.P.V.C PLUMBING-Providing and fixing C.P.V.C plumbing in toilets including all bends, T, nipples, and the connecting it to existing plumbing network as pr site condition and direction of the architect.

PLUMBING FITTING-Providing and fixing of the plumbing fittings, - 'Florentine' range of 'Jaquar' or equivalent as direction of the architect.

SWR DRAINAGE AND SEWAGE LINES-Providing and fixing of SWR drainage and sewage lines in toilets including all bends, T, nipples, and the connecting it to existing plumbing network as pr site condition and direction of the architect.

Providing and fixing stainless steel brush finish H type handles 900 mm length, SS 316 GRADE

Providing and fixing of lock for toughened glass door stainless steel with all fittings & Complete Hardware.

Supply, Installation, Testing and commissioning of 20A industrial socket, 20A pin top and 20A SP MCB with box and the box shall be concealed in wall. The box also shall be of respective make of MCB. Including wiring between switch and socket.

8 Module Pop up Boxes for Conference Table complete with mounting arrangement

4 Module Pop up Boxes for Conference Table complete with mounting arrangement

Cable termination of armoured cables 1.1 KV grade including supply & installation of cable glands, cable lugs (copper or aluminium single compression type), heat shrinkable sleeves on long ends, crimping paste etc. (One set includes termination of all cores of one end only) a) 3.5Cx50sqmm AL .AR XLPE CABLE

4CX25 SQMM AL.AR XLPE CABLE

4CX10 SQMM CU.AR XLPE CABLE

4CX6 SQMM CU.AR XLPE CABLE

4CX4 SQMM CU.AR XLPE CABLE

1x10 sq.mm FEXIBLE CABLE

Recess Mounted 1x6Watt LED Spot fitting complete .

LED Rope light 5Watt / meter with Driver/ controller

Supply , installation, testing commissioning of 8 Way VTPN Distribution Board With 160 A 4 Pole MCCB as incomer and outgoing 63 tp mcb-01 No, 25/32TP MCB-07 Nos

Supply , installation, testing commissioning of 8 Way ETPN Distribution Board With 63 A 4 Pole MCB as incomer and outgoing 6/10/16/25/32 SP-18 Nos

Supply , installation, testing commissioning of 6 Way VTPN Distribution Board With 63 A 4 Pole MCB as incomer and outgoing 25/32 TP MCB -6 Nos

SITC OF 63 AMP 4P MCB WITH Enclosure

SITC OF 32 AMP 4P MCB WITH IP55 Enclosure

Supply,Installation, Testing & commissioning of Telephone outlet box with top plate

Supply,Installation, Testing & commissioning of crone type tag block for termination of telephone cables/conduits in MS sheet steel enclosures as per drawing and specifications. Tag block 50pair.

Supply,Installation, Testing & commissioning of 10 Pair 0.5 mm size copper tinned conductor armoured PVC cable .

Installation, Testing & commissioning of TVoutlet box with top plate

SITC of Pipe in pipe Maintenance free Chemical Earthing System, Model 2 Meters, Outer Electrode dia 80 mm inner dia 25 mm,filled with highly conductive material with outer electrode coated up to 70-100 micron galvanisation with HDG and inner electrode coated upto 200-250 micron galvanisation Tightly filled with Crystalline Conductor Mixture with HDG along with bag of back fill compound (BFC) 25 Kg complete (ASHLOK /SAI make or equivalent. including boring, refilling, levelling etc. to obtain Earth Resistance up to Approx. 1 OHM.( IS

supply and installtion of HDMI / VGA cable 15mtr

supply and installtion of HDMI / VGA cable 10 mtr

Supply, Installation, Testing&Commissioning of Microprocessor based 1 (one) LOOP configuration panel , fully networkable with each loop capable of taking minimum 99 detectors+99 devices, 8 line x 40 character alpha-numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have in built rectifier, Loop cards,provision for internal printer(if required), L C D unit to indicate Fire/Fault Signal with address and analog output, built in printer to log all fire or fault events complete in all respects, integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification.

Supply, Installation, Testing & Commissioning of Analogue Addressable Intelligent Optical Smoke Detector with decentralized intelligence , soft addressable type, with inbuilt fault isolator as per NFPA style 7 wiring complete with base as required. (Approved Make:HoneywellMoreley/ Esser Honeywell/Siemens Fire Finder/)

Supply, Installation, Testing & Commissioning of Analogue Addressable Intelligent Heat / Rate of RiseDetector with decentralized intelligence , soft addressable type, with inbuilt fault isolator as per NFPA style 7 wiring complete with base as required. (Approved Make:HoneywellMoreley/ Esser Honeywell/Siemens Fire Finder/)

Supply, Installation,Testing&Commisioning of Addressable Manual Call Point soft addressable type with in built fault isolator complete as required.

Supply, Installation,Testing&Commisioning of Analogue Addressable Intelligent loop powered sounder. (Approved Make:HoneywellMoreley/ Esser Honeywell/Siemens Fire Finder/)

Supply , installation, testing and commissioning of approved make 1.1KV/1100 V grade PVC insulated 2cx1.5 sqmmcopper armoured FRLS cable .

Providing & Fixing of 55" LED Display (Pannel) with Screen Size : 55", Aspect ratio - 26:9, Resolution : 1920 X 1080, Panel Type IPS Brightness (cd/m2) : 350, Contrast Ratio - 1,100 : 1,500,000:1 (DCR), Response Time : 12 ms, Viewing Angle:178 X 178 deg., AudioPower : 20W(10W x 2) for External Speaker. Make : LG/Sony/NEC

Providing and Fixing of Wall Mount Bracket for 55" LED LCD TV

Providing and Fixing of Automatic Hand dryer.

Bidder Name

Amount

BONTON TECHNOMAKE PRIVATE LIMITED

METHODEX SYSTEMS PVT LTD

METHODEX SYSTEMS PVT LTD

METHODEX SYSTEMS PVT LTD