NIT NO. 384/DURG(Kawardha)/2026

N.I.T. SCHEDULE FOR MINOR ORIGINAL WORKS FOR NON RESIDENTIAL BUILDINGS UNDER KAWARDHA SUB DIVISION

USED SOR ISSUED ON 10/06/2026 FOR BUILDING WORKS BY EinC PWD

P.A.C.RS= 42.37 LACS

S.N. CH.NO. I.N. SUB. I.N. PARTICULARS OF ITEMS QTY RATE UNIT AMOUNT

1 16 26 Dismantling doors chowkhats with shutters (steel or wood) includingarchitrave, hold fast etc. complete and stacking within 50 metres lead. 30.00 85.00 Nos. 2550.00

2 16 27 Dismantling windows chowkhats with shutters (steel or wood) includingarchitrave, hold fast etc. complete and stacking within 50 metres lead.. 30.00 57.00 Nos. 1710.00

3 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 269.00 19.00 Sqm 5111.00

4 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.In cement mortar. 50.00 224.00 Cum 11200.00

5 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 60.00 11.00 Sqm 660.00

6 16 53 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead

1 Wash basin of all sizes and shapes 15.00 26.00 Each 390.00

3 European/ Anglo Indian WC pan of all sizes 15.00 39.00 Each 585.00

7 1 1 Excavation for all types and sizes of foundations , trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1 In all types of soils. 200.00 157.00 cum 31400.00

8 3 1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 35.00 2525.00 cum 88375.00

9 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending etc. complete as per drawing including cost of binding wire. All complete. Thermo-Mechanically treated bars FE 415 7200.00 46.00 kg 331200.00

10 3 2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. (Note :Excess/ less cement used as per design mix is payable/ recoverable separately)

1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 25.00 3539.00 cum 88475.00

11 3 4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 45.00 3622.00 cum 162990.00

12 2 1 Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 224.00 118.00 Sqm 26432.00

5 Columns, Pillars, Piers and likes- rectangular or square in shape 200.00 252.00 Sqm 50400.00

7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 180.00 200.00 Sqm 36000.00

8 Beams, lintels, cantilevers & walls 180.00 172.00 Sqm 30960.00

13 7 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

6 Cement Mortar 1:6 (1 cement : 6 coarse sand) 50.00 2774.00 cum 138700.00

14 7 6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth 100.00 2877.00 cum 287700.00

15 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 100.00 315.00 cum 31500.00

16 3 13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 12.00 3601.00 cum 43212.00

17 9 18 Providing and fixing in position doors, windows and ventilators framesmade of cold rolled pressed steel sheet framed profiles made fromcommercial M.S. Sheets conforming to I.S. 513 of 1973 and as pergeneral specifications of I.S 4351 including hinges jamb, lock jamb, steelbutt hinges, base tie, joints mitred and welded with 10cm long legs f size15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete inprofile section applying a priming coat of red oxide zinc chromate primer.

1 Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet 150.00 307.00 Rm 46050.00

18 8 1 Providing wood work in frames of doors, windows,clerestory windows and other frames wrought framed and fixed in position.

2 Sal, bijasal, benteak, khair, haldu 1.00 51893.00 Cum 51893.00

19 8 12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

1 40 mm. thick (single leaf) 25.00 2097.00 sqm 52425.00

2 35 mm. thick (single leaf) 25.00 1704.00 Sqm 42600.00

20 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frameof angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mmM.S. gusset plates at junctions and corners, all necessary fittingscomplete including applying a priming coat of red oxide zinc chromateprimer.

21 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 500.00 57.00 28500.00

22 8 150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. 35.00 2196.00 sqm 76860.00

23 8 99 1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm

24 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 30.00 45.00 Each 1350.00

25 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 30.00 29.00 Each 870.00

26 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws:125 mm 30.00 43.00 Each 1290.00

27 8 106 Providing and fixing MS bright finished single hanging door stopper with necessary MS steel screws complete. 30.00 11.00 Each 330.00

28 8 107 1 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 125x65x2.12 mm 30.00 31.00 Each 930.00

29 8 166 D. 2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 50.00 6370.00 sqm 318500.00

30 11 1 1 Providing and making 6mm thick cement plaster of mix:In Cement mortar 1:4 (1 cement : 4 fine sand) 200.00 74.00 sqm 14800.00

31 11 2 4 Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand) 500.00 78.00 sqm 39000.00

3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand) 500.00 91.00 sqm 45500.00

32 14 54 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete

2 More than 2 mm to 4mm thickness to make surface even and smooth in line and level. 1000.00 88.00 sqm 88000.00

33 14 63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion , Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty). 500.00 63.00 sqm 31500.00

34 14 64 Providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @ 0.75 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C ( Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breezee Metex Gold, Opus I-50 / Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete forthe work.(with 3 year Warranty) 660.00 71.00 sqm 46860.00

35 14 67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C ( Glossy /Semi Glossy finish ) (Product such as Asian Ace , Dulux Promise Exterior , Berger Wall Masta , Nerolac Suraksha Plus , Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty) 500.00 47.00 sqm 23500.00

36 14 73 Providing and applying priming coat on wood work applied @ 0.50lit/Sqm as per relevant IS code 3536:1999 ( product such Asian trucare,Burger Wood Keeper, Dulux Duwel wood primer) with all tool tackles and labour etc for complete the work. 150.00 30.00 Sqm 4500.00

37 14 74 Providing and applying priming coat on steel work with red oxide/ zinc phosphate primer applied @ 0.50 lit /Sqm as per relevant code 3536:1999 ( product such as Asian Zinc phosphate , Dulux Steel primer, Burger Red oxide primer ) with all tools tackles and labour etc. complete for the work. 250.00 30.00 Sqm 7500.00

38 14 71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel,Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 100.00 113.00 Sqm 11300.00

39 14 72 Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 120.00 102.00 Sqm 12240.00

40 14 76 Providing and applying Aluminium paint mimimum 2 coats in all metal surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite aluminium paint, Dulux Aliminium paint, Burger Superior Aluminium Paint) with all tools tackle and labour etc. complete for the work. 140.00 37.00 Sqm 5180.00

41 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 200.00 216.00 Sqm 43200.00

42 12 76 Providing and laying glazed viitrfied floor (GVT/ PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete

1 Size 600x600mm thickness 9 to 10mm 80.00 819.00 sqm 65520.00

43 12 79 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0 mm thick layer) VITRIFIED floor tiles with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with withe cement and matching pigments etc. complete.

1 Size 600x600mm thickness 9 to 10mm 80.00 920.00 Sqm 73600.00

44 12 74 Providing and fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades over 20mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

2 Size 400x400mm thickness 7 to 8 mm 100.00 702.00 sqm 70200.00

42 12 75 Providing and fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete

2 ize 300x600mm thickness 7 to 8mm 75.00 723.00 sqm 54225.00

45 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 60.00 295.00 sqm 17700.00

46 18 1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

1 White Long pattern W.C. pan of size 580 mm 20.00 2090.00 each 41800.00

47 18 4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

1 White pedestal type 20.00 2450.00 each 49000.00

48 18 17 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P.brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

1 White Size 550x450 mm 20.00 1216.00 each 24320.00

49 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

560x410 mm bowl depth 215 mm. 8.00 5279.00 each 42232.00

50 18 17 2 Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm 20.00 52.00 each 1040.00

18 27 Providing and fixing cast iron grating for gully trap.

1 100x100mm square or round 20.00 26.00 each 520.00

51 18 56 Providing and fixing sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm as per IS: 1729 complete, including cost of cutting and making good the walls and floors :

1 100 mm inlet and 100 mm outlet 20.00 478.00 each 9560.00

52 18 77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

1 Tee/ Tee with door/ Bend 45°/ Bend 90°

3.1 Vent covel 75 mm 20.00 29.00 each 580.00

18 77 5 P" trap 110mmx110mm long 20.00 193.00 each 3860.00

53 18 76 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

1 75 mm dia pipe. 200.00 155.00 meter 31000.00

54 19 4 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer

2 20 mm nominal outer dia .Pipes. 100.00 128.00 meter 12800.00

4 32 mm nominal outer dia .Pipes. 100.00 230.00 meter 23000.00

55 19 6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK

2 20 mm nominal outer dia pipes 100.00 103.00 meter 10300.00

4 20 mm nominal outer dia pipes 100.00 194.00 meter 19400.00

5 20 mm nominal outer dia pipes 100.00 255.00 meter 25500.00

56 19 7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:

2 20 mm dia. nominal bore 102.00 157.00 meter 16014.00

4 32 mm dia. nominal bore 102.00 270.00 meter 27540.00

57 19 14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required

14 Soap dish plate 20.00 139.00 Each 2780.00

16 Towel rail (600mm long x 20mm dia) 20.00 287.00 Each 5740.00

17 Towel ring (150 mm dia) 20.00 216.00 Each 4320.00

58 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 20.00 3947.00 Each 78940.00

59 20 31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 15.00 1453.00 Each 21795.00

60 19 13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality

1 Bib cock (250 grams) 40.00 157.00 Each 6280.00

2 Bib cock (350 grams) 40.00 201.00 Each 8040.00

61 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 15000.00 6.00 Litre 90000.00

62 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 220.00 559.00 Sqm 122980.00

63 4 13 Grading roof for water proofing treatment with:

2 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 20.00 3920.00 Cum 78400.00

64 9 3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.

2 Electric resistance or induction butt welded tubes Grade-300 1000.00 79.00 kg 79000.00

65 10 11 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches wlftapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 200.00 541.00 Sqm 108200.00

66 10 16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ Self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

1 Ridges plain (500-600mm) 100.00 469.00 meter 46900.00

67 14 53 White washing/ Colour washing with lime to give an even shade in Three or more Coats for New surface as per relevant IS code 6278:1971 Consumption of lime 3.50kg /10 Sqm with all tools tackles and labour etc. complete for the work 250.00 12.00 Sqm 3000.00

68 9 39 Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/ wooden/ angle iron posts (straight or diagonal) including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete(Cost of posts, struts to be paid for separately) 8000.00 8.00 meter 64000.00

69 9 40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 500.00 139.00 meter 69500.00

70 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete.

Aperture 50x50mm 180.00 281.00 Sqm 50580.00

71 9 45 Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block. 550.00 59.00 kg 32450.00

72 9 44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. 150.00 236.00 Sqm 35400.00

73 172 Re-Cushioning, and Ply Replacement of a Regular Single-Seater Sofa (Leatherite) Re-Cushioning, and Ply Replacement of a Regular Single-SeaterSofa (Leatherite) including the total replacement of the existingun serviceable cushion and plywood frame. The scope includes the following specifications and eliverables:FrameReconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability. Proper and neat High Quality Leatherite With Composition-100 PU Heavy Martendile-25000, Soft Feel Anti Scratch fabric, width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is comprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneousmaterials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 11947.00 Each 11947.00

74 173 Re-Cushioning, and Ply Replacement of a Regular Double-Seater Sofa (Leatherite) Re-Cushioning, and Ply Replacement of a Regular Double-SeaterSofa (Leatherite) including the total replacement of the existing un serviceable cushion and plywood frame. The scope includesthe following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability. Proper and neat covering with High Quality Leatherite With Composition-100 PU Heavy Martendile-25000, Soft Feel Anti Scratch fabric, width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is comprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per thedirections of the Engineer-in-Charge. 1.00 16753.00 Each 16753.00

75 174 Re-Cushioning, and Ply Replacement of a Regular Three-Seater Sofa (Leatherite) Repair, Re-Cushioning, and Ply Replacement of a Regular Three-Seater Sofa (Leatherite) Complete repair and rehabilitation of athree-seater sofa, including the total replacement of the existingunserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability. Proper and neat covering with High Quality Leatherite With Composition-100 PU Heavy Martendile-25000, Soft Feel Anti Scratch fabric, width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is prehensive and inclusiveof all necessary materials, pecialized tools, and skilled labourrequired for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials. 1.00 22364.00 Each 22364.00

76 175 Re-Cushioning, and Ply Replacement of a Single-Seater Regular Sofa (Fabric) Re-Cushioning, and Ply Replacement of a Single-Seater Regular Sofa (Fabric) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frameusing 18 mm waterproof commercial plywood.Cushioning &adding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D SuperSofty Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with 100% Polyster fabricwith smooth touch, shade and colour as per selection with 40000Martindale and minimum 360 GSM. The quoted rate is omprehensive and inclusive of all necessary materials,specialized tools, and skilled labour required for proper fixingand fitting.Safe removal and off-site disposal of all old,unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of theEngineer-in-Charge. 1.00 9994.00 Each 9994.00

77 176 Re-Cushioning, and Ply Replacement of a Double-Seater Regular Sofa (Fabric) Re-Cushioning, and Ply Replacement of a Double-Seater Regular Sofa (Fabric) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and eliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning &Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with 100% Polyster fabric with smooth touch, shade and colour as per selection with 40000 Martindale and minimum 360 GSM. The quoted rate is comprehensive and inclusive of all necessary materials,specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 13977.00 Each 13977.00

78 177 Re-Cushioning, and Ply Replacement of a Three-Seater Regular Sofa (Fabric) Repair, Re-Cushioning, and Ply Replacement of a Three-Seater Regular Sofa (Fabric) Complete repair and rehabilitation of a three-seater sofa, including the total replacement of the existing nserviceable cushion and plywood frame. The scope includes the following specifications and eliverables:Frame Reconstruction: Complete replacement of the structural frameusing 18 mm waterproof commercial plywood.Cushioning &Padding: Supply and installation of high-resilience padding usinga combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability. Proper and neat covering with 100% Polyster fabric with smooth touch, shade and colour as per selection with 40000Martindale and minimum 360 GSM . The quoted rate is comprehensive and inclusive of all necessary materials,specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old,unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 18900.00 Each 18900.00

79 178 Re-Cushioning, and Ply Replacement of a Single-Seater Teak Maharaja Sofa (Leatherite) Re-Cushioning, and Ply Replacement of a Single-Seater Maharaja Sofa (Leatherite) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super thane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with High Quality Leatherite With ,Composition-100 PU Heavy Martendile-25000,Soft Feel Anti Scratch,width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is comprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 15442.00 Each 15442.00

80 179 Re-Cushioning, and Ply Replacement of Double -Seater Teak Maharaja Sofa (Leatherite) Re-Cushioning, and Ply Replacement of a Double-Seater Maharaja Sofa (Leatherite) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables :Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with High Quality Leatherite With ,Composition-100 PU Heavy Martendile-25000,Soft Feel Anti ratch,width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is omprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge 1.00 21853.00 Each 21853.00

81 180 Re-Cushioning, and Ply Replacement of Three -Seater Teak Maharaja Sofa (Leatherite) Re-Cushioning, and Ply Replacement of a Three-Seater Maharaja Sofa (Leatherite) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with High Quality Leatherite With ,Composition-100 PU Heavy Martendile-25000,Soft Feel Anti Scratch,width:145CM GSM:380. Pilling:4-color Fastness Light:4. The quoted rate is comprehe-nsive and inclusive of allnecessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of theEngineer-in-Charge. 1.00 29567.00 Each 29567.00

82 181 Re-Cushioning, and Ply Replacement of a Single-Seater Teak Maharaja Sofa (Rich Fabric) Re-Cushioning, and Ply Replacement of a Single-Seater Maharaja Sofa (Rich Fabric) including the total replacement of the existing unserviceable cushion and plywood frame. Thescope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurallyrequired for optimal comfort and durability.Proper and neat covering with approved 100% Polyster high Quality fabric withsmooth touch and soft feel. Shade and colour as per selection with 60000 Martindale and minimum 410 GSM & Anti Scratch properties. The quoted rate is comprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal ofall old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 14433.00 Each 14433.00

83 182 Re-Cushioning, and Ply Replacement of Double -Seater Teak Maharaja Sofa (Rich Fabric) Re-Cushioning, and Ply Replacement of a Double-Seater Maharaja Sofa (Rich Fabric) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with approved 100% Polyster high Quality fabric with smooth touch and soft feel. Shade and colour as per selection with 60000 Martindale and minimum 410 GSM & Anti Scratch properties. The quoted rate is comprehensive and inclusive of all necessary materials, specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old, unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 20382.00 Each 20382.00

84 183 Re-Cushioning, and Ply Replacement of Three -Seater Teak Maharaja Sofa (Rich Fabric) Re-Cushioning, and Ply Replacement of a Three-Seater Maharaja Sofa (Rich Fabric) including the total replacement of the existing unserviceable cushion and plywood frame. The scope includes the following specifications and deliverables:Frame Reconstruction: Complete replacement of the structural frame using 18 mm waterproof commercial plywood.Cushioning & Padding: Supply and installation of high-resilience padding using a combination of 50 D HR (High Resilience) Foam, 32 D Super Softy Foam, and 50 Density PU (Polyurethane) Foam in varying thicknesses as structurally required for optimal comfort and durability.Proper and neat covering with approved 100% Polyster high Quality fabric with smooth touch and soft feel. Shade and colour as per selection with 60000 Martindale and minimum 410 GSM & Anti Scratch properties . The quoted rate is comprehensive and inclusive of all necessary materials,specialized tools, and skilled labour required for proper fixing and fitting.Safe removal and off-site disposal of all old,unserviceable materials.All works must be executed to a high standard of workmanship, incorporating any miscellaneous materials required to complete the job as per the directions of the Engineer-in-Charge. 1.00 27715.00 Each 27715.00

N.I.T. SCHEDULE FOR MINOR ORIGINAL WORKS FOR RESIDENTIAL BUILDINGS UNDER KAWARDHA SUB DIVISION

USED SOR ISSUED ON 10/06/2026 FOR BUILDING WORKS BY EinC PWD

P.A.C.RS= 42.37 LACS

S.N. CH.NO. I.N. SUB. I.N. PARTICULARS OF ITEMS QTY RATE UNIT AMOUNT

1 16 26 Dismantling doors chowkhats with shutters (steel or wood) includingarchitrave, hold fast etc. complete and stacking within 50 metres lead. 30.00 85.00 Nos. 2550.00

2 16 27 Dismantling windows chowkhats with shutters (steel or wood) includingarchitrave, hold fast etc. complete and stacking within 50 metres lead.. 30.00 57.00 Nos. 1710.00

3 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 269.00 19.00 Sqm 5111.00

4 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.In cement mortar. 50.00 224.00 Cum 11200.00

5 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 60.00 11.00 Sqm 660.00

6 16 53 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead

1 Wash basin of all sizes and shapes 15.00 26.00 Each 390.00

3 European/ Anglo Indian WC pan of all sizes 15.00 39.00 Each 585.00

7 1 1 Excavation for all types and sizes of foundations , trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1 In all types of soils. 200.00 157.00 cum 31400.00

8 3 1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 40.00 2525.00 cum 101000.00

9 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending etc. complete as per drawing including cost of binding wire. All complete. Thermo-Mechanically treated bars FE 415 7200.00 46.00 kg 331200.00

10 3 2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. (Note :Excess/ less cement used as per design mix is payable/ recoverable separately)

1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 35.00 3539.00 cum 123865.00

11 3 4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 50.00 3622.00 cum 181100.00

12 2 1 Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 224.00 118.00 Sqm 26432.00

5 Columns, Pillars, Piers and likes- rectangular or square in shape 200.00 252.00 Sqm 50400.00

7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 180.00 200.00 Sqm 36000.00

8 Beams, lintels, cantilevers & walls 180.00 172.00 Sqm 30960.00

13 7 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

6 Cement Mortar 1:6 (1 cement : 6 coarse sand) 60.00 2774.00 cum 166440.00

14 7 6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth 120.00 2877.00 cum 345240.00

15 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 100.00 315.00 cum 31500.00

16 3 13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 12.00 3601.00 cum 43212.00

17 9 18 Providing and fixing in position doors, windows and ventilators framesmade of cold rolled pressed steel sheet framed profiles made fromcommercial M.S. Sheets conforming to I.S. 513 of 1973 and as pergeneral specifications of I.S 4351 including hinges jamb, lock jamb, steelbutt hinges, base tie, joints mitred and welded with 10cm long legs f size15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete inprofile section applying a priming coat of red oxide zinc chromate primer.

1 Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet 150.00 307.00 Rm 46050.00

18 8 1 Providing wood work in frames of doors, windows,clerestory windows and other frames wrought framed and fixed in position.

2 Sal, bijasal, benteak, khair, haldu 1.00 51893.00 Cum 51893.00

19 8 12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

1 40 mm. thick (single leaf) 25.00 2097.00 sqm 52425.00

2 35 mm. thick (single leaf) 25.00 1704.00 Sqm 42600.00

20 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frameof angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mmM.S. gusset plates at junctions and corners, all necessary fittingscomplete including applying a priming coat of red oxide zinc chromateprimer.

21 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 600.00 57.00 34200.00

22 8 150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. 35.00 2196.00 sqm 76860.00

23 8 99 1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm

24 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 30.00 45.00 Each 1350.00

25 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 30.00 29.00 Each 870.00

26 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws:125 mm 30.00 43.00 Each 1290.00

27 8 106 Providing and fixing MS bright finished single hanging door stopper with necessary MS steel screws complete. 30.00 11.00 Each 330.00

28 8 107 1 Providing and fixing powder coated M.S. butt hinges with necessary iron screws: 125x65x2.12 mm 30.00 31.00 Each 930.00

29 8 166 D. 2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 50.00 6370.00 sqm 318500.00

30 11 1 1 Providing and making 6mm thick cement plaster of mix:In Cement mortar 1:4 (1 cement : 4 fine sand) 200.00 74.00 sqm 14800.00

31 11 2 4 Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand) 500.00 78.00 sqm 39000.00

3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand) 500.00 91.00 sqm 45500.00

32 14 54 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete

2 More than 2 mm to 4mm thickness to make surface even and smooth in line and level. 1200.00 88.00 sqm 105600.00

33 14 63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion , Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty). 500.00 63.00 sqm 31500.00

34 14 64 Providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @ 0.75 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C ( Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breezee Metex Gold, Opus I-50 / Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete forthe work.(with 3 year Warranty) 660.00 71.00 sqm 46860.00

35 14 67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C ( Glossy /Semi Glossy finish ) (Product such as Asian Ace , Dulux Promise Exterior , Berger Wall Masta , Nerolac Suraksha Plus , Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty) 500.00 47.00 sqm 23500.00

36 14 73 Providing and applying priming coat on wood work applied @ 0.50lit/Sqm as per relevant IS code 3536:1999 ( product such Asian trucare,Burger Wood Keeper, Dulux Duwel wood primer) with all tool tackles and labour etc for complete the work. 150.00 30.00 Sqm 4500.00

37 14 74 Providing and applying priming coat on steel work with red oxide/ zinc phosphate primer applied @ 0.50 lit /Sqm as per relevant code 3536:1999 ( product such as Asian Zinc phosphate , Dulux Steel primer, Burger Red oxide primer ) with all tools tackles and labour etc. complete for the work. 250.00 30.00 Sqm 7500.00

38 14 71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel,Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 200.00 113.00 Sqm 22600.00

39 14 72 Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 200.00 102.00 Sqm 20400.00

40 14 76 Providing and applying Aluminium paint mimimum 2 coats in all metal surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite aluminium paint, Dulux Aliminium paint, Burger Superior Aluminium Paint) with all tools tackle and labour etc. complete for the work. 140.00 37.00 Sqm 5180.00

41 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 200.00 216.00 Sqm 43200.00

42 12 76 Providing and laying glazed viitrfied floor (GVT/ PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete

1 Size 600x600mm thickness 9 to 10mm 80.00 819.00 sqm 65520.00

43 12 79 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0 mm thick layer) VITRIFIED floor tiles with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with withe cement and matching pigments etc. complete.

1 Size 600x600mm thickness 9 to 10mm 80.00 920.00 Sqm 73600.00

44 12 74 Providing and fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades over 20mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

2 Size 400x400mm thickness 7 to 8 mm 100.00 702.00 sqm 70200.00

42 12 75 Providing and fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete

2 ize 300x600mm thickness 7 to 8mm 75.00 723.00 sqm 54225.00

45 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 60.00 295.00 sqm 17700.00

46 18 1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

1 White Long pattern W.C. pan of size 580 mm 20.00 2090.00 each 41800.00

47 18 4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

1 White pedestal type 20.00 2450.00 each 49000.00

48 18 17 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P.brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

1 White Size 550x450 mm 20.00 1216.00 each 24320.00

49 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

560x410 mm bowl depth 215 mm. 8.00 5279.00 each 42232.00

50 18 17 2 Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm 24.00 52.00 each 1248.00

18 27 Providing and fixing cast iron grating for gully trap.

1 100x100mm square or round 24.00 26.00 each 624.00

51 18 56 Providing and fixing sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm as per IS: 1729 complete, including cost of cutting and making good the walls and floors :

1 100 mm inlet and 100 mm outlet 20.00 478.00 each 9560.00

52 18 77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

1 Tee/ Tee with door/ Bend 45°/ Bend 90°

3.1 Vent covel 75 mm 20.00 29.00 each 580.00

18 77 5 P" trap 110mmx110mm long 20.00 193.00 each 3860.00

53 18 76 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

1 75 mm dia pipe. 200.00 155.00 meter 31000.00

54 19 4 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer

2 20 mm nominal outer dia .Pipes. 100.00 128.00 meter 12800.00

4 32 mm nominal outer dia .Pipes. 100.00 230.00 meter 23000.00

55 19 6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK

2 20 mm nominal outer dia pipes 100.00 103.00 meter 10300.00

4 20 mm nominal outer dia pipes 100.00 194.00 meter 19400.00

5 20 mm nominal outer dia pipes 100.00 255.00 meter 25500.00

56 19 7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:

2 20 mm dia. nominal bore 120.00 157.00 meter 18840.00

4 32 mm dia. nominal bore 120.00 270.00 meter 32400.00

57 19 14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required

14 Soap dish plate 20.00 139.00 Each 2780.00

16 Towel rail (600mm long x 20mm dia) 20.00 287.00 Each 5740.00

17 Towel ring (150 mm dia) 20.00 216.00 Each 4320.00

58 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 20.00 3947.00 Each 78940.00

59 20 31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 15.00 1453.00 Each 21795.00

60 19 13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality

1 Bib cock (250 grams) 40.00 157.00 Each 6280.00

2 Bib cock (350 grams) 40.00 201.00 Each 8040.00

61 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 18000.00 6.00 Litre 108000.00

62 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 220.00 559.00 Sqm 122980.00

63 4 13 Grading roof for water proofing treatment with:

2 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 20.00 3920.00 Cum 78400.00

64 9 3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.

2 Electric resistance or induction butt welded tubes Grade-300 1000.00 79.00 kg 79000.00

65 10 11 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches wlftapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 200.00 541.00 Sqm 108200.00

66 10 16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ Self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

1 Ridges plain (500-600mm) 100.00 469.00 meter 46900.00

67 14 53 White washing/ Colour washing with lime to give an even shade in Three or more Coats for New surface as per relevant IS code 6278:1971 Consumption of lime 3.50kg /10 Sqm with all tools tackles and labour etc. complete for the work 250.00 12.00 Sqm 3000.00

68 9 39 Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/ wooden/ angle iron posts (straight or diagonal) including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete(Cost of posts, struts to be paid for separately) 8000.00 8.00 meter 64000.00

69 9 40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 500.00 139.00 meter 69500.00

70 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete.

Aperture 50x50mm 180.00 281.00 Sqm 50580.00

71 9 45 Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block. 550.00 59.00 kg 32450.00

72 9 44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. 150.00 236.00 Sqm 35400.00