Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.5 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹29.6 L+₹1.9 L (6.81%)Rejected-Finance | L-2 | Rejected-Finance Not found L-1 | |
| 3 | L-3₹30.7 L+₹3 L (10.8%)Rejected-Finance | L-3 | Rejected-Finance Not found L-1 | |
| 4 | L-4₹30.7 L+₹3.1 L (11.0%)Rejected-Finance | L-4 | Rejected-Finance Not found L-1 |
| Sl No | Description | Qty | Unit | popular pipes L3 | H.N.SINGH AND COMPANY L1 | ABTAR SINGH AND COMPANY L4 | SUKHDEV ENGINEERING WORKS L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields errection and levelling at site, through all kinds of roads, approaches fields etc. in all leads and lifts completed in all respects as per the directions of Engineer - in-Charge. | 1 | Job | 30,000 ₹30,000 Lowest | 40,000 ₹40,000 | 45,000 ₹45,000 | 45,000 ₹45,000 |
| 2.00Drilling of bore as per specifaction laid down in IS2800-1991 (part-I) with upto-date amnedments,if any,with Direct Rotary Rig or combination drilling rig,Precussion Rig starting with 650-600 mm dia M.S pipe reduced to 450-400 mm dia M.S pipe conforming to IS 4270-2001 with up-to-date amendements,if any, in all kind of soils, boulders, rocks, collapsible strata,sturated soils,artesian conditions including the cost of all consumable,stores,water,fuel,lubricants and other accessories etc. complete in all respectsd as per the directions of the Engineer -in -Charge. | |||||||
| 2.10 | i) Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level within all leads and lifts. | 30 | Mtr | 9,000 ₹2,70,000 | 6,300 ₹1,89,000 Lowest | 7,000 ₹2,10,000 | 6,500 ₹1,95,000 |
| 2.20 | ii) Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level within all leads and lifts. | 30 | Mtr | 10,000 ₹3,00,000 | 6,800 ₹2,04,000 Lowest | 7,500 ₹2,25,000 | 7,000 ₹2,10,000 |
| 2.30 | iii) Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level within all leads and lifts. | 30 | Mtr | 12,000 ₹3,60,000 | 7,400 ₹2,22,000 Lowest | 8,000 ₹2,40,000 | 7,500 ₹2,25,000 |
| 2.40 | iv) Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 90-150 mtrs below ground level within all leads and lifts. | 60 | Mtr | 15,000 ₹9,00,000 | 8,400 ₹5,04,000 Lowest | 8,500 ₹5,10,000 | 8,500 ₹5,10,000 |
| 3.00 | Collection ,preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. | 1 | Each | 2,000 ₹2,000 | 1,500 ₹1,500 Lowest | 2,000 ₹2,000 | 2,000 ₹2,000 |
| 4.00 | a) Supplying & Lowering of IS marked Electric Resistance Welded M.S.pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.9 mm bevelled edge conforming to I.S 4270-2001 with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 60 | Mtr | 8,000 ₹4,80,000 Lowest | 8,100 ₹4,86,000 | 9,200 ₹5,52,000 | 9,000 ₹5,40,000 |
| 4.01 | Providing & Lowering of IS marked Electric Resistance Welded M.S.slotted pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.9 mm bevelled edges, conforming to I.S. 4270-2001 slot size 1.57x75mm welded with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 5 | Mtr | 9,000 ₹45,000 Lowest | 9,400 ₹47,000 | 9,900 ₹49,500 | 9,800 ₹49,000 |
| 5.00 | Providing and fixing M.S taper/reducer as per lengths approved by Engineer -in-Charge, the material of M.S taper/reducer shall be equivalent to parent pipe material and shall conform to chemical composition as per clasue 5.2 and mechanical properties as per clasue 6.1and table 1 of IS 4270-2001 with upto date amendments,if any, complete in all respect as per directions of the Engineer -in -Charge. | 1 | Each | 2,500 ₹2,500 Lowest | 3,500 ₹3,500 | 3,300 ₹3,300 | 3,500 ₹3,500 |
Tender Value
₹17.9 L
EMD Value
₹35,742
Closing Date
18 Oct 2021, 5:00 pmClosed
Executive Engineer Jal Shakti Divn No.1 Una HP
Executive Engineer Jal Shakti Divn No.1 Una HP
Drilling , Lowering of assembly and development of 150 mtrs deep tubewell at village Behdala (backside hotel sunshine) in Tehsil and Distt. Una under PMKKKY
2021_HPIPH_52904_1
No. JSV-1/TA/E-tender/21-8966-94 dt 05-10-21
Open Tender
Civil Works
Item Rate
60 days
tubewell at village Behdala (backside hotel sunshi
as per NIT
10 documents required · 10 mandatory
₹400
Yes
Executive Engineer Jal Shakti Divn No.1 Una HP
₹35,742
Yes
22 Nov 2025
5 Oct 2021
19 Oct 2021
5 Oct 2021
18 Oct 2021
5 Oct 2021
5 Oct 2021 - 18 Oct 2021
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .