CA NO GE ND-31 2021 22 REPAIRS TO WOODEN AND STEEL FURNITURE AT MARRIED ACCOMMODATION NSV I II III AND NCS CHANAKYAPURI AND SPECIAL FURNITURE ITEMS AT NOM VARUNA UNDER GE NEW DELHI

Amount

REPAIR TO ORIENTAL SOFA SET 1A (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Oriental Sofa Set 1A (Two seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet Markeen, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO ORIENTAL SOFA SET 1B (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Oriental Sofa Set 1B (single seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 3A (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 3A three seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet ,Markeen cloth, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 3B (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 3B (single seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 1A (TP) : Removing old unservicable , upholstery including subsidiary items of meterials like FRC sheet Markeen, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 1A (Two seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 3B (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 1B (Single seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet Markeen, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 2A (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 2A (Two seater) Drg (TP) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO FULLY UPHOLSTRED SOFA SET 2B (TP) : Removing old unservicable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Fully upholstred Sofa Set 2B (Single seater) placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet Markeen, Melamine polish on wooden surfaces exposed to view after completion of upholhostery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

REPAIR TO CHAIR WRITING CUSHOINED Drg No. (TP) - S&F in repair approved upholstery like FRC sheet 80 mm Markeen, Hassian cloth and tapestry cloth first quality for chair writing cushioned placed in NOM Varuna including taking down the old unserviceable upholstery. Note : Colour, shade, texture design pattern and quality of tapestry cloth shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 300.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO CHAIR EASY CUSHOINED Drg No. (TP) - S&F in repair approved upholstery like FRC sheet 80 mm Markeen, Hassian cloth and tapestry cloth first quality for chair writing cushioned for seat and back placed in NOM Varuna including taking down the old unserviceable upholstery. Note : Colour, shade, texture design pattern and quality of tapestry cloth shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 300.00 per RM complete all as directed and as approved by the GE/Engr-in-Charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO DESK BENCH COMBINED WOODEN AT NCS CHANKYAPURI Drg No. (TP) - : S& F in replacement of unserviceable legs back of desk wooden combined and new leg to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

S& F in replacement of unserviceable legs front of bench wooden combined and new leg to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

S& F in replacement of unserviceable legs rear of bench wooden combined and new leg to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

S& F in replacement of unserviceable Back strip of bench wooden combined and new back strip of size 23"x3"x1" to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

S& F in replacement of unserviceable seat of bench wooden combined and new seat of size 28"x1"x9"(With suitable size of strip) to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

S& F in replacement of unserviceable top of Desk wooden combined and new top of size 30"x12"(in two stips)x1" to be made of seasoned Indian teak wood at NCS Chankyapuri all as per sample and as directed by Engr-in-Charge.

French polish on old wod surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO SCHOOL DESK WITH STEEL FRAME SIZE 36"x15"x38" AT NCS CHANKYAPURI Drg No. (TP) - : M&L for gas welding to broken components of desk steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by smooth grinder as directed by Engr-in-Charge.

S& F in replacement of unserviceable top of desk and new top of size 36"x15"(in two equal strips)x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

M&L for painting of desk steel frame with two coat of synthethic enamel paint over a coat of red oxide Primer including complete removal of existing paint all as directed by Engr-in-Charge.

S&F PVC shoes of best quality in black for desk as approved by Engr -in-charge.

REPAIR TO SCHOOL BENCH WITH STEEL FRAME SIZE 36"X15"X39" AT NCS CHANKYAPURI Drg No. (TP) - : M&Lfor gas welding to broken components of bench steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by smooth grinder as directed by Engr-in-Charge.

S& F in replacement of unserviceable seat of bench and new seat of size 36"x15"(in two equal strips)x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

S& F in replacement of unserviceable back strip of bench and new back strip of existing size 36"x6"x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

M&L for painting of bench steel frame with two coat of synthethic enamel paint over a coat of red oxide Primer including complete removal of existing paint all as directed by Engr-in-Charge.

S&F PVC shoes of best quality in black for desk as approved by Engr -in-charge.

REPAIR TO SCHOOL DESK WITH STEEL FRAME SIZE 33"x15"x32" AT NCS CHANKYAPURI Drg No. (TP) - : M&L for gas welding to broken components of desk with steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by smooth grinder as directed by Engr-in-Charge.

S& F in replacement of unserviceable top of desk and new top of size 33"x15"(in two equal strips)x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

M&L for painting of desk steel frame with two coat of synthethic enamel paint over a coat of red oxide Primer including complete removal of existing paint all as directed by Engr-in-Charge.

S&F PVC shoes of best quality in black for desk as approved by Engr -in-charge.

REPAIR TO SCHOOL BENCH WITH STEEL FRAME SIZE 33"X15"X30" AT NCS CHANKYAPURI Drg No. (TP) - M&L continuous welding with gas welding to broken components of bench steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by smooth grinder as directed by Engr-in-Charge.

S& F in replacement of unserviceable seat of bench and new seat of size 33"x15"(in two equal strips)x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

S& F in replacement of unserviceable back strip of bench and new back strip of existing size 33"x6"x1" with well finished and polished of indian seasoned teak wood is to be fixed with suiatble size of nuts bolts and washers at NCS Chankyapuri all as per sample and as directed by Engr-In-Charge.

M&L for painting of bench steel frame with two coat of synthethic enamel paint over a coat of red oxide Primer including complete removal of existing paint all as directed by Engr-in-Charge.

S& F in replacement of hard rubber shoes for desks and Benches steel frame as per existing shape and size all as directed by Engr-in-Charge at NCS Chankyapuri.

REPAIR TO TABLE BED SIDE STEEL (FD/E6/MAP/15(R)- Removing of unserviceable sides in any position, S&F new sides made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge.

Removing of unserviceable back in any position, S&F new back made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge.

Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F new top drawers made of MDF prelaminted board of exterior grade.

Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked).

S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)- Removing of old unserviceable ply top from existing charpoy GI pipe ply top and S&F the new 12mm thick BWR commercial plywood with unpolished edging(ISI marked) suitable for charpoy GI pipe having approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts of size 70mm x 06mm with GI washer (Heavy Weight) complete all as directed. (Make of Plywood :- Century/Greenply/Duro)

M&L dismentling of existing unservicable broken long rail and S& F new long rail of GI pipe Med grade 32 mm bore ISI marked including threading at both ends complete all as specified and directed Make : Jindal/TATA/BST

M&L dismentling of unserviceable short rail and cutting of old long rail from Srt No. 17.01 to the required size for short rail including rethreading at both ends complete all as specified.

Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 17.02 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

M&L dismentling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitble for GI pipe med grade 32 mm bore pipe complete all as specified and directed.

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore to GI pipe charpoy of approved make complete all as specified.

Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.

Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.

REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)- Removing of old unserviceable ply top from existing charpoy and S&F the new 12mm thick BWR commercial plywood with unpolished edging(ISI marked) suitable for charpoy having approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gass welding of existing frame before fixing the ply all as per drg amnd as directed. (Make of Plywood :- Century/Greenply/Duro)

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint in black (make Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) - S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR, conforming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of MS nuts, bolts and washers without having any joints. make : Kit ply/Green/Century ply shape and size as per drg and as directed by Engr-in-Charge.

REPAIR TO HEAD BOARD : Removing of unserviceable Head board and S&F new head board to be made of 18 mm thick Exterior grade MDF board as approved shade (Action Tesa/Ecoboard/novapan) with PVC beading all around , fixing with suitable screws to cleats of the head board as specified on drg and as directed by Engr-in-Charge.

REPAIR TO FOOT BOARD : Removing of unserviceable foot board and S&F new foot board to be made of 18 mm thick Exterior grade MDF board as approved shade (Action Tesa/Ecoboard/novapan) with PVC beading all around with suitable screws to cleats of the Footboard as specified on drg and as directed by Engr-in-Charge.

M&L Scrping of existing coats of paints filiing, finishing and painting of Bed hard steel with two coats of synthetic enamel paint (Make : Berger/Asian) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F new PVC hard rubber shoes as per drg or as directed by Engr-in-Charge.

REPAIR TO TABLE SIZE 900MMX600MMX750/760MM WITH DRAWER (FD-283) - : Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable leg : all as per Srl No. 20.00 above but shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable front/back rail : all as per Srl No. 20.01 above but shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable side rail shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable centre stiffener shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable drawers shape and size as shown in drg and as directed by the Engr-in-charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE SIZE 900MMX600MMX750/760MM WITHOUT DRAWER (FD-284) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable leg : all as per Srl No. 21.00 above but shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable front/back rail : all as per Srl No. 21.01 above but shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable side rail shape and size as shown in drg using well seasoned teak wood.

S&F in replacement of unserviceable centre stiffener shape and size as shown in drg using well seasoned teak wood.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-251/378/FD/MAP-II/07) - S&F in repair , unserviceable looking mirror 5 mm thick Make : Modiguad/Atul along with new 6 mm thick commercial plywood back of mirror frame all as spcfied , shown on drg and as directed Make : Kit Ply/Green Ply/Century.

S&F in replacemnt of unserviceable cushoin with tapestry cloth of approved color/shade for stool table dressing shape and size shown in drg and as directed by Engr-in-Charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO DRESSING MIRROR GENTS (FD/E6/MAP/16) - S&F in repair , unserviceable looking mirror 5 mm thick Make : Modiguad/Atul alongwith new 6 mm thick commercial plywood back of mirror frame all as spcfied , shown on drg and as directed.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO PEG TABLE (FD-277/384) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable long rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable short side rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable legs shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable side/centre stiffener shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE CENTRE 2 TIER & SINGLE (FD-274) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable long rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable short side rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable legs shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable side/centre stiffener shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE TABLE DINING 4 PERS (FD/MAP-II/03) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable long rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable short side rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable legs shall be first class hardwood well seasoned teak wood free from cracks and dead knots,well finished and polished shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE WRITING (FD-275) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F drawer to be made of sides and back of 12 mm thick commercial plywood , bottom of 6 mm thick commercial plywood , Front top of 18 mm thick prelaminated ext grade particle board whatever shown on drg including SS knobs including removing of unserviceable drawer all as directed by Engr-in-Charge.

S&F SS knobs of approved color as directed by the Engr-in-Charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO ALMIRAH MED STEEL DRG (FD-1032) :

Dismentling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed.

S&F in replacement of unserviceable shelves with new shelves to be made of 1 mm thick MS sheet duly painted made shape and size as specified in drg or as directed by Engr -in-Charge.

Dismentling of unserviceable bushes of locking asembly and S&F new MS bushes of locking assemly as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Almirah Medium Steel with two coats of synthetic enamel paint in dual shade of approved color (make Berger/AsianPaint) with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL DRG (1031) :

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed

Dismentling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Almirah Medium Steel with two coats of synthetic enamel paint in dual shade of approved color (make Berger/AsianPaint) with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO LOCKER BED SIDE STEEL DOUBLE DECKER (TP) : Dismentling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding.

S&F in replacement of unserviceable hasp and staple to be made of Chromium Plated safety type 100 mm long or as specified on drg or directed by Engr-in-Charge.

S & F in replacement of unserviceable steel handles 100 mm long of approved quality after removing of existing handles as specified and shown in drg

S & F in replacement of unserviceable hanging rod 25 mm dia steel of approved quality after removing of existing rod as specified and shown in drg

S&F in replacement of unserviceable shutter with new shutter with MS Hinges to be made of 1 mm thick MS sheet duly painted made shape and size as specified in drg or as directed by Engr -in-Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Locker Bed Side Steell with two coats of synthetic enamel paint in dual shade of approved color (make Berger/AsianPaint) with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

Dismentling of unserviceable CP handles OF Almirah Med & Almirah large steel and S&F new CP handles of approved quality as specified and directed by Engr -in-Charge.

Dismentling of unsrviceable locks of Almirah Med & Almirah large and S&F new locks of approved brand as specified and shown in drg.

M&L dismentling of of existing unserviceable MS Butt Hinges of Almirah Med, Almirah large, Locker bed side steel & S&F new MS Butt Hinges with suitable MS screws as per specification and as per drg. 75 mm long medium, quality of approved pattern complete all as specified and directed by Engr-in-charge.

REPAIR TO CHAIR VARANDAH (FD-256) : Removing of existing unserviceable old cane and canning of chair varanda with new plastic cane of 4.00 mm wide half round cane and M&L painting of chair varandah with two coats of white paint after preparing the surface with red oxide by scrubing the old paint and as directed by the Engr-in-Charge. Make SHAH/Premimium.

M&L welding to broken components of chair varandah so as to bring the whole unit in serviceable condition, welding portion should be smoothed by smooth grinder as directed by Engr-in-Charge.

S&F PVC hard rubber shoes to Chair veranda as approved by Engr-in-charge.

REPAIR TO CHAIR DINING JCOs/ORs (FD/MAP-II/15) : Removing of unserviceable seat, S&F, new PVC seat of chair shall be made from PVC seat 4x10 mm thick ribs moulded along with seat in single piece. PVC seat 4 mm thick hole and wt of PVC seat is not less than 0.5 Kg. Make ; Amko as per shown in drg & as directed by the Engr-in-Charge.

Removing the existing unserviceable stiffener and S&F new stiffener of side or central of chair dining JCO/Ors made out of seasoned teak wood duly well finished as existing and as per drg.

Removing of existing unserviceable rear legs S&F new rear legs made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable front legs S&F new front legs made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable side rail S&F new side rail made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

S&F new wooden corner brackets of size 65x65x25 mm well finished and polished to Chair Dining as directed by Engr-in-charge.

S&F PVC shoes to Chair Dining of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair dining like mild grinding of outer surace , hamering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engineer-in Charge.

REPAIR TO CHAIR EASY (FD-229) :

Removing of existing unserviceable legs S&F new legs made of Ist class hard wood well finished and polished (Teak Wood) to chair Easy as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable side rail for seat S&F new side rail for seat made of Ist class hard wood well finished and polished (Teak Wood) to chair Easy as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable front/back rail for seat S&F new front/back rail for seat made of Ist class hard wood well finished and polished (Teak Wood) to chair Easy as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable Arms for seat S&F new Arms for seat made of Ist class hard wood well finished and polished (Teak Wood) to chair Easy as per drg and as directed by Engr-in-Charge.

S&F new wooden corner brackets of size 65x65x25 mm well finished and polished to Chair Dining as directed by Engr-in-charge.

S&F PVC shoes to Chair Easy of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair easy like mild grinding of outer surace , hamering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engineer-in Charge.

REPAIR TO CHAIR DINING (FD-279) :

Removing the existing unserviceable stiffener and S&F new stiffener of side or central (well finished and polished) of chair dining made out of seasoned teak wood duly finished as existing and as per drg.

Removing of existing unserviceable rear legs S&F new rear legs made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable front legs S&F new front legs made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable side rail S&F new side rail made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable bend stiffener S&F new bend stiffener made of Ist class hard wood well finished and polished (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

S&F new wooden corner brackets of size 65x65x25 mm well finished and polished to Chair Dining as directed by Engr-in-charge.

S&F PVC shoes to Chair Dining of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair dining like mild grinding of outer surface, hamering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engr-in-Charge.

REPAIR TO CHAIR DINING WITH LONG BACK TP) : S&F in replacement of unserviceable seat and back of chair dining long back and upholstering the same as per existing pattern with seat and back with 100 mm (TP) thickness 40 density as specified and as directed by the Engr-in-Charge

Removing of existing unserviceable front legs S&F new front legs made of Ist class hard wood (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable rear legs S&F new rear legs made of Ist class hard wood (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

Removing of existing unserviceable side rail S&F new side rail made of Ist class hard wood (Teak Wood) to chair dining as per drg and as directed by Engr-in-Charge.

M & L melamine polshing on wooden surfaces exposed to view after completion of upholstery work. quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

REPAIR TO CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) : Removing of existing unserviceable complete seat of chair and S&F new PVC seat of approved brand and color with suitable screws including tightening of loose joints of existing frame before fixing the seat with steel frame as shown in drg as directed by the Engr-in-Charge.

Removing of unserviceable writing hand board in any position, S&F new hand board with suitable size of screws with PVC liping made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F the clips for tightening of the bottom tray with suitable screws/nuts bolts to the frame as directed by the Engr-in-Charge.

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Chair School with hand board with two coats of synthetic enamel paint in black (make Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO BED HARD WITH PLYWOOD TOP (FD-246/247) : S&F in replacement of unserviceable top of bed hard to be made of 12 mm thick commercial plywood BWR grade conforming to IS 303-1989 of ISI marked and to be fixed with 25 mm long steel secrew without having any joints, shape and size, all as specified on drg or as directed by Engr-in-Charge. make : Green ply/Archid/Century Ply.

S&F in replacement long rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg or as directed by Engr-in-Charger.

HEAD REST : Outer ply all as specified and directed, to be replaced by 3/4 mm thick plywood one side teak face and inner side commercial ply wood BWR grade ISI marked IS 303-1989 including teakwood beading all round and 1/2 cut 12 mm dia beading made to shape as shown on drg or directed by Engr-in-charge. Make : Green ply/Archid/Century Ply.

FOOT REST : All as per Srl No. 40.02 above.

M&L for french polishing and normal repair of existing Bed ply top like mild grinding of outer surface, hamering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engr-in-Charge.

TABLE DINING-I (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

CHAIR EASY-2, 3 & 4 (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

CHAIR DINING-2 (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

TABLE CENTRE-1, 2, 3, 7 & 8 (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

PEG TABLE1, 2, 3, 4 & 5 (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

SIDE BOARD WITH MIRROR-1 & 2 (TP) : M & L melamine polshing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

Removing of existing unserviceable old cane and recaning of chair dining & Chair Easy with new plastic cane , white 2.00 mm wide for seat half round of 0.4 mm thick and border caning 3.5 , 3.00, wide plastic cane of brand SHAH/Premier including with normal repair and as directed by the Engr-in-Charge.

SMS Enterprises

M/S NEHAL ENTERPRISES