CERTAIN REPAIR TO OTM ACCN OF ARMD REGT I AND ARMD REGT II UNDER AGE B/R-II AT NAMS

Amount

M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc all as specified and directed.

ditto- all as per above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

Supply only liquid WPC complete all as specified.

M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement incl taking down old plaster on ceiling ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M & L for three coat of white wash incl preparation of new plaster surface of ceiling complete all as specified and directed.

M&L for two coat of oil bound distemper over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as specified and directed

M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as specified and directed .

M&L for two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc 100% premium acrylic emlusion paint having VOC less than 50 gm /litre and UV resistance as per IS15489 2004,alkailsurfaces by spray machine over one coat of primer incl preparation of new plasterd surface complete of all as spd and directed. Note : Colour and make as approved by Engr-in-Charge

M&L for applying one coats of cement base paints on walls etc, including preparing old surfaces of walls by brooming down or by steel wire brushing complete all as specified and directed.

M&L for two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray machine on old plastered/ unplastered surfaces of walls, pillers,corniceson incl preparation of old surfaces through electrical operated grinder complete incl edges over to obtain smooth finish using sand paper, over one coat of primer complete all as specified and directed.

M&L for one layer of compound of altek/birla putty 3mm th on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed

M & L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed..

S&F for rotational moulded polythene 500 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting. All as specified and directed including old disconnecting and taking down complete all as specified and directed.

All as per Item above but 1000 litres water storage tanks.

M & L for PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring including demolition complete all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

All as per item above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.

M&L for glazed ceramic coloured/printed/ dark tiles size 300x200mm x7 mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.

All as per item above but area tiles of size exc 0.09sqm but n.exc 0.18sqm on vertical surface in skirting /dado etc.

M&L for Virified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, on vertical surfaces of wall etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed.

M&L for green marble 15-17 mm thick over cement screed bed laid on 10 mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser incl rubbing and polishing incl moulding rounding to edge of marble & dismantling complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and directed

S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm agg.) in plinth protection, path and paving incl demolition and rubbish off the primises all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'B' in on concrete slab all as specified and directed.

M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast etc including necessary form work complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter & two coat of synthetic enamel paint over a coat of red oxide on wooden surface and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface and the following builders hardware contain each shutter :- (i) Three x MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) Two x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

All as per ser item above but laid in trench or in floor

S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves,screws as required at site & dismantling complete all as specified and directed

M & L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads incl taking down shutter and two coat of synthetic enamel paint over a coat of red oxide on wooden surface & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface & incl the following builders hardware contain each shutter :- (i) Three x MS butt hinges, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) One x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab incl one coat of bitumen @ 1.20 kg/sqm incl cleaning of surfaces complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, cement concrete 1:7:12 (40 mm graded aggregate ) in lean concrete including demolition complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed complete all as specified and directed.

S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 75mm, type C-21 complete all as specified and directed.

S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 Nos aluminium handles 150mm, 3 x hinges, 2 x Aluminium tower bolts 150mm with each shutter any type complete all as specified all as specified.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed

M&L for 4.8 to 5.5mm thick float glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed.

S & F 12 mm thick glass door, frosted with certain logo, fixed with floor spring,fixed on floor with two nos stainless steel handle on each leaf incl necessary provision to lock the door completed all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by Engr-in-Charge.

All as per above item here-in –before but except sheeting.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment with 25mm thick sand filling incl dismantling and rubbish off the primises all as specified and directed.

All as per srl item above but except paver block shall be reused after necessary cleaning and making good all as specified.

M&L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.

S & F dor plain gypsum board panel 12.5mm thick on ceiling with and incl necessary GI frame used with ' T ' or any section accessories etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm incl dismantling of walls and ceiling board any type and two coat of OBD over a coat of putty complete all as specified and .directed.

M&L for pointing to brick tiles in CM 1:3 laid flat in roofing incl racking out joints complete all as specified and directed .

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 100 mtr making good in soft/ loose soil complete all as specified and directed.

M&L for PCC(1:3:6), type C-2, using 40 mm graded aggregate as foundation / mass concrete complete all as specified and directed.

S& F for Looking mirror of best size (600 x 450) mm with all fitting all as specified and directed.

S&F in repair for door closer hydrulicacally,alluminium regulated designation No 1 universal type suitable for door shutter complete all as specified and directed.

S&F for 15 mm bor GI tube medium grade freed to wall or under floor incl taking up or down old tube complete including cutting closes and make good in CM 1:3 complete all as specified and directed.

S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors incl taking up or down old tube and cleaning for refixing .

S & F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S & F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .

S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.

S&F for PVC connections 45cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.

S&F in repair for CP fancy type 100mm size chromium plated shower roses with or without swivel joints ,any size including fixsing to steel pipe or union complete all as specified and directed.

S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed

S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S&F in repair hole washbasin mixer wround spout with 375 mm long braided hoses complete all as specified and directed .

S & F in repair wall mixer 15 mm bore (fancy type) cast copper alloy with capstan head,CP screwed down high pressure with long screwed both ends for iron pipe as per union complete all as specified and directed.

S&F Health Faucet hand shower with 8mm dia 1mtr long flexible tube wall hook complete all as specified and directed .

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specifed and dirtected.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specifed and dirtected..

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

S & F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.

M &L toilet paper holder stainless steel recessed type complete all as specified and directed

S&F corner glass shelf brass cromium plated of 10mm thick with bricket compleate all as specified and directed.

S&F glass shelf(500x125mm)with brass bricket compleate all as specified and directed.

S&F Ball valves brass insert ,bore size 20mm fixed with GI tubeing all as specified and directed.

S & F in repair vitreous china urinals, half stall type (420 x 395 x 635 mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge.

S&Fharrison rails Aluminum Curtain Rails colour powder coated 25mm size with brackets including screws fixing of walls complete all specified and directed.

S&F mild steelwork in tubular trusses including special shaped washer etc. compleated using ERW induction butt welded tubes confriming to IS 1161-1779 grade St-240 compleate all as specified and directed.

M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by engineer -in-charge.

M&L 25mm thick Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate)including prepration of old surface, scraping ,washing,boorming,chipping etc complete all as specified and direct by Engr-in -charge.

S&F 1.25mm thick steel rolling shutter with out ball bearing as seicified including to cover ,an-choring road hasp and staple and including taking down and shope coat primrer erected in position as indicated compleate push pull or manual type all as specified and directed.

Repair only steel rolling shutter with out ball bearing as seicified including to cover ,an-choring road hasp and staple and including taking down and refixing and compleate push pull or manual type all as specified and directed.

M & L for TMT bars 10 mm dia and over cut to length bent to shape reqd. incluing cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M/L form work to soffits of suspended slab such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete

M/L reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in slab and finishing exposed surfaces fair & even all as specified and directed.

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia fixed to walls

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia laid in trenches or in floors

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia laid in trenches or in floors

supply and fixing PVC (SWR) bends any radius of 110 mm bore.

supply and fixing PVC (SWR) bends any radius of 75 mm bore.

S&F PVC (SWR) junction single, (single T) equal or unequal 75mm dia with access door

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door

S&F PVC(SWR) vent cowl 110mm dia

S&F PVC(SWR) vent cowl75mm dia

M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm

Taking down shutters of any description not exceeding 1 Sqm each.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Refixing of shutter in the same opening exc 1 Sqm and not exceeding 2 Sqm each.

Refixing of shutter in the same opening n.exc 1 Sqm each .

S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples.

All as per item above hereinbefore but fixed in repairs.

M&L for 35mm thick precast cement concrete jalli and louvers, with Type B-0, 1:2:4 PCC (using 12.5mm graded stone aggregate) set in CM 1:4, including all mouldings and also incld frame with dismantaling of existing etc, complete all as specified and directed.

M & L for providing pre cast cement concreate (RCC Jali piller) size of piller 100x100x70mm and taking down compleate all as speified and directed.

S&F in repair MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed

S&F in repair Floor door stopper of aluminium with hard drawn steel spring,fixed in floor Overall length of cover plate 140mm complete all as specified and directed.

tarlok singh contractor

M/s Vijay Construction Co.

Santokh Singh and Associates

m/s. gopal krishan