Water Supply Scheme Makhi Kalan, Block Bhikhiwind, Distt. Tarn Taran. Under JJM/Special Assistance to States 2023-24 Share (Tw)

Amount

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tubewellis lowered & tested, equipment as required such as hand boring machine and its ccessory,transportationto site and vice versa etc. complete in all respect.

Boring with 200mm id Housing Pipe

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in charge

200 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

(c) 200 mm nominal size dia.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Supplying & fixing of M.S pipe bail plug suitable for 150mm dia UPVC casing pipe having thickness of socket as 12mm length 100mm & base plate of 8mm thick complete in all respects.bail plugcomplete in all respects.

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect

(c) 200 mm internal diameter

Development of stabillizing of the tubewell with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

(a) Capacity of Air compressor 300 cfm at 250 PSI

Development of stabillizing of the tubewell with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Supplying & fixing of M.S. Clamp of size 200mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Providing for santary clay seal (as per BIS code IS 2500-2019) including sterlization of T/W

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

160mm o/d pipe of 10 Kg/cm2 lines laid complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department size 0.9m x 0.9m Including Carriage

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

C.I FITTING OUTSIDE PUMP CHAMBER Providing and installing 150mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 570 LPM against a head of 69 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including GI. Column Pipe of suitable size 80 mm =40.50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications (Note:Rate excluding the cost of old machinary).

Cost of pumping set

Cost of lowering (with length) 80mm

Cost of submersible cable (with length) 4mm2

Cost of pannel board

Construction of Platform of size 0.90 m Dia and Depth 0.050 mtr. for PVC Tubewell with Tab & side furnished with 12.5 mm thick cement plaster 1:4, Tapping 1:2:4, Cement Concrete 1:8:16 with 40 mm gauge and CC 1:4:8 with 40 mm gauge for flooring complete in all respects

The Rasulpur Coop L C Society Ltd