Purchase of Furniture from micro and small enterprises of Rajasthan, registered under MSMED act, 2006.

Furniture Item Description:

Executive Table: i. Wooden executive table size 2400 (w)x1100(D)x750(H)mm. ii. Made out of 50 mm thick MDF board with paper lamination complete along with 3 drawer pedestal box on wheels with locking arrangement. iii. With leatherite cushioned writing management on top iv. Along with side runner table with shelf and sliding key board tray of size 1050x450x760mm. v. Knock Down Construction Gromme and Vertebrae Cable Carrier for Wire Management. vi. Natural veneer finished in approved shades with lacquer polish matt finish.

Executive Chair: Executive high back chair (550 mm * 520 mm D*1320 mm H) leather cushioned seat of 12mm thick hot pressed plywood, upholstered leather with additional lumbar support adjustment backward & forward, up and down for extra support. Both features shall operate through roller button (clock wise to anticlockwise). Chair frame shall be made up of aluminium frame with leather upholstery handle (370 mm W* 90mm D thickness 40 mm) The chair shall have SYNCRO TILT mechanism feature: 360 degree revolving type, with multi position locking. The aluminium base shall be 50 mm with 5 nos. Nylon castors. The assembly shall be knockdown type.

Visitor Chair: (560 mm W X 670 mm D X 1020 mm H) Visitor chair fixed type with arm duly leatherette cushioned ; seat and back to be made of 12 mm thick hot pressed plywood upholstered PU (stylish leather like upholstery) cover and moulded PU foam. The PU foam density shall be of 45+/- 2khg/m3. The back will be designed for contour lumbar support for extra cushioning. Under structure shall be of MS elliptical/oblong pipe (40x20x1mm thick) chrome plated frame.

Back Side Unit: i. Back side unit wooden almirah size 76"(H)x54"(W)x19"(D)mm. ii. With glass door made out of MDF board with paper laminated of 18 mm thickness with 5 mm thick transparent glass door with locking arrangement with three doors. iii. Almirah bottom of 30"(H) without glass. Others with glass.

Chair for Dias and Seminar Hall: Chair fixed type with arms duly leatherette cushioned seat (Seat 572 mm* 624 mm* 858 mm approx.); and back with cantilever powder coated frame; seat and back shall be made of 10 mm thick hot –pressed plywood, Upholstered leatherette. Chrome pipe thickness shall be of 1mm thickness, round under structure shall be made of metal chrome frame 25 mm dia x1.2mm thickness. The upholstery will be non absorbent, stain and dirt free. Colour by choice.

Dining Chair Ergonomic Dining Chair size 40D x 48W x 84H Centimeters with Steel Chrome Polish and Leatherite Seat

Dining Table for Mess: Dining table for mess made out of MS pipe frame structure of 50x50mm square pipe duly powder coated with four legs and all four side connected foot rest provided with pipe support under top duly powder coated with 18mm thick GRANITE STONE TOP duly finished in size 72"x36"x30".

Reception Table: Table for reception in curved shape made of 25mm thick wooden top with PVC edge bending along with storage box unit both sides with addition top on top of 18"with support under structure made of 18mm PLT engineer wood/perforated powder coated MS Jhali of 10ft length with overall height of 4 feet.

Multiseater Chair (at Reception): Three seater perforated chair back made out of perforated Jali with heavy chrome SS finish frame with 1.2 mm thickness of legs and arms. Cross beam shall be made up of powder coated rectangular MSERW tube having 80X40X2 mm (+/- 2mm) seat height -410 mm and total length 710 mm, width and depth as measured from pedestal ie. Width -1600 mm & depth 560 mm with tolerance of +/- 0.05%

Podium: Wooden podium 750 mm x 550mm x 1100 mm (H) made out of16 mm thick pasper laminated MDF board, having PVC cable manager engineer wood with beading with hole for mike and one inside shelf and bottom shelf provided along with Department Logo at front DAIS of 50"(H).

Computer Chair: Computer operating chair with mesh back and cushioned seat with hydraulic system for height adjustment and five-twin wheel castors. The seat shall be made up of 1.2 cm thick hot pressed plywood upholstered with fabric of required colour and moulded PU foam. Back size: 53.0 cm (W) x 73cm (H) , seat size: 54.6 cm (W)x 49 cm (D). Arm top made of PP and pedestal with 67 cm pitch centre dia (77 cm with castor)

Novelty Manufacturing Co. (BID ID -2981826)

M/s S.H.F. INDUSTRIES (BID ID -2982193)

M/s Ravi International (BID ID -2982179)