REPAIR MAINT OF EM SERVICES OF MILITARY HOSPITAL BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down carefully copper/aluminum point wiring for light, fan, point 5 amps including fitting such as light fittings switch socket holder ceiling roses complete.

Taking down carefully service connection sub main wiring of any Nos of wires and any type including making good distrubed surface complete all as specified and directed.

Dismantling unservicesable MCB DB of any size and capacity alongwith teakwood bords

M&L for point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts grade PVC FRLS insulated unsheathed cable drawn in including PVC conduit/PVC casing caping not less than 20mm dia with all accessories conduit or in PVC casing capping as approved by EIC with PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continous earth, sunk in cast iron/MS terminal box duly painted with aluminum inside and anticorrosive paint out side with 2.8 mm thick for the follwing size are

(a) One light /fan / call bell point controlled by one switch

(b) One light point controlled by two 2 way switches, with cables 1.5 sqmm

(c) One 3 pin socket outlet 5 Amps on independent board

(d) One 3 pin socket outlet on same board

(e) All as per ser Item No 4.00 here-in-before but 3 pin socket out let 15 Amps on independent board elect wiring 2.5 sqm.

(f) All as per ser Item No 4.00 here-in-before but 3 pin socket out let 15 Amps on independent board elect wiring 4.0 sqm.

M&L point wiring with 1.5 Sq mm multi standard copper conductor 1100 volts grade PVC insulated unsheathed cable drawn in and including in concealed PVC conduit not less than 20 mm dia medium grade with fitting as approved with PVC insulated unsheathed copper wire green 1.5 Sq mm for continuous earth, sunk in cast iron / MS terminal box duly painted with aluminum inside and black bitumeneous paint all around out side over one coat of anticorrosive paint with 2.8 mm thick bakelite sheet, earth dolly for the following :- NOTE :- The rate inclusive of cutting, chasing, making good to disturbed surface with matching paint/distemper in existing of any type of wall).

(a) One light / fan / call bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

(d) All as per ser Item No 5.00 here-in-before but 3 pin socket outlet 15 Amps on independent board elect wiring 2.5 Sqm.

M&L for point wiring with 1.5 Sq mm multi standard copper conductor 1100 volts grade PVC insulated unsheathed cable drawn in existing concealed PVC conduit with PVC insulated unsheathed copper wire green 1.5 Sq mm for continuous earth, sunk in cast iron / MS terminal box duly painted with aluminum inside and black bitumeneous paint all around out side over one coat of anticorrosive paint with 2.8 mm thick bakelite sheet, earth dolly for the following :- NOTE :- The rate inclusive of making good to disturbed surface with matching paint/distemper in existing of any type of wall.

(a) One light / fan / call bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

(d) All as per ser Item No 6.00 here-in-before but 3 pin socket outlet 15 Amps on independent board elect wiring 2.5 Sqm.

(e) All as per ser Item No 6.00 here-in-before but one light points control by two way switch.

(f) All as per ser Item No 6.00 here-in-before but 3 pin socket out let 15 Amps on independent board elect wiring 4.0 sqm.

S&F in replacement Switch piano, flush button type, single pole, one way, 5 Amps one way front operated ISI marked complete all as specified and directed.

S&F in replacement socket outlet 5 pin flush 6 Amps, ISI marked complete all as specified and directed.

S&F in replacement switch socket combined outlet 6 pin fulsh 15 Amp multi purpose, ISI Marked complete all as specified and directed.

S&F in replacement ceiling rose surface bakelite 65mm dia three terminal complete all as specified and directed.

S&F in replacement bell push flush type, SP, 5 Amp, ISI Marked complete all as specified and directed.

S&F in replacement switch piano type flush button type, single pole, two way, 5 Amps ISI marked complete all as specified and directed.

S&F in replacement bell electric single phase suitable for 240 V complete all as specified and directed.

S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, ISI Marked complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 Volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F cylindrical surface mounting round shape LED downlighter 15 W, 240 volt with excellent external thermal managed aluminum pressure die-cast housing high efficiency light utilising COB technology complete all as specified and directed.

S&F in replacement fan regulator electronic type suitable for 240 volt, 300 watt step socket type complete all as specified and directed.

Supply and fixing LED flood light fitting pressure die-cast aluminum body and clear PC cover 50 W, 230 Volts complete all as directed and directed by Engr-in-Charge.

Taking down existing unserviceable light fitting ceiling type and S&F LED 36 watt recess mounting light fitting (2 x 2 luminaire) with white powder coated CRCA housing with high power LEDs and aluminium frame with flat white high power transmission acrylic cover including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core complete all as specified & directed. Note: Contractor will produce manufacturing test cetificate & warrenty certificate.

S&F in replacement modular switch 1 way 5A, 1 module, ISI marked complete all as specified & directed.

S&F in replacement Modular switch 1 way 16A, 1 module, ISI marked complete all as specified & directed.

S&F in replacement Socket, 6A - 2/3 pin combined 2 module, 1 module, ISI marked complete all as specified & directed.

S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module, ISI marked complete all as specified & directed.

S&F in replacement Fan step regulator, 120W - 2 module, ISI marked complete all as specified & directed.

S&F in replacement White cover plate with frame, 1 module, ISI marked complete all as specified & directed.

All as per item No 27.00 here-in-before but for 02 module.

All as per item No 27.00 here-in-before but for 04 module.

All as per item No 27.00 here-in-before but for 08 module.

S&F in replacement metal flush box 1/2 module.

S&F in replacement metal flush box 04 module.

S&F in replacement metal flush box 06 module.

S&F in replacement enclosure sheet metal for MCB, DB TPN 440 volts, 200 Amps rated bus bar 4 way double door openable recessed mounting complete all as specified and directed by EIC.

S&F in replacement enclosure sheet metal for MCB, DB SPN, 240 volts 200 Amps rated bus bar 12 way double door openable recessed mounting, as per IP-43, IK-09 with acrylic door complete all as specified and directed by EIC.

S&F in replacement enclosure sheet metal for MCBm DB SPN, 240 volts, 200 Amps rated bus bar 8 way double door openable recessed mounting, as per IP-43, IK-09 with acrylic door complete all as specified and directed by EIC.

S&F in replacement enclosure sheet metal for MCB, DB SPN, 240 volts, 200 Amps rated bus bar 4 way double door openable recessed mounting, as per IP-43, IK-09 with acrylic door complete all as specified and directed by EIC.

S&F in replacement 63 Amps MCB TPN 'C' curve 415 V complete all as specified and directed by EIC.

S&F in replacement upto 40 Amps MCB TPN 'C'415 V complete all as specified and directed by EIC.

S&F in replacement 5 to 32 Amps MCB 'B' single pole 240 V complete all as specified and directed by EIC.

S&F in replacement MCB single pole with neutral 240 volts 6 to 32 Amps complete all as specified and directed by EIC.

S&F in replacement MCB single pole with neutral 240 volts 40 to 63 Amps complete all as specified and directed by EIC.

M&L in replacement for sub main wiring with PVC FRLS insulated unsheathed 2 x 4 sqm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC rigid conduit/casing caping on surface with 4 sqm PVC insulated green copper cable for continuos earth PVC pipe not less than 20 mm dia width medium grade with all accessories complete all as specified and directed.

M&L in replacement for sub main wiring with PVC FRLS insulate unsheathed 2 x 6 sqm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC rigid conduit/casing caping on surface with 6 sqm PVC insulated green copper cable for continuos earth PVC pipe not less than 20 mm dia/width med grade with all accessories complete all as specified and directed.

M&L for Sub main wiring with four single core FRLS PVC insulated unsheathed cable 1100 volts grade, 2x10 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit of size 20 mm dia ISI marked including PVC insulated unsheathed 1 x 10 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed. Notes for item Nos 43 to 45 :- Two runs of wire cable and one run of earth continuity cable wire and one run of PVC conduit shall be measured in one unit.

Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB, 240 V grade 32 Amp all as specified and directed.

S&F sheet metal enclosure factory fabricated for Multiphase Out going suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed. Note : MCCB & MCB Shall be measured and Paid Separately.

S&F for MCCB 100 Amp, 16 KA 3 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.3mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron wire 4 mm earth lead by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion.NOTES 1. The unit rate includes for protection pipe and GI strip dia from top of earth plate upto 5.00 meter above ground level.

M&L for hylem sheet 2.8 mm thick ISI Marked complete as per site requirement upto size 4x4 inch to 8x12 inch all as specifed and directed.

Taking out U/S CFL lamp 11 W from light fittings and S&F in repair LED 11W, 240V, 50Hz, suitable for 2X11 w surface mounting CFL Luminaires complete all as specified and directed.

Supply and fixing in replacement electronic ballast 11 watt, suitable for 2X11 W surface mounting CFL Luminaires complete all as specified and directed.

Taking out unserviceable CFL lamp, 36W from light fittings and S&F in replacement LED Lamp 36W, 4 pin type complete suitable for surface mounting CFL Luminaires 1X36W or 2X36W, complete all as specified and directed.

S&F in replacement of CFL lamp 36W with LED lamp 36 watt, 4 pin type retrofit type complete suitable for surface mounting CFL Luminaires 1X36W or 2X36W, complete all as specified and directed.

Supply and fixing electronic ballast 36 watt, suitable for 2X36W or 1X 36W surface mounting CFL Luminaires complete all as specified and directed.

Taking down unserviceable light fitting any type and S&F LED 20 W tube light fitting (T8 type) , including LED retrofit tube 20/22 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.

Supply and fixing in replacement electronic ballast 28 watt, suitable for T-5 fittings complete all as specified and directed.

Supply and fixing in replacement LED tube rod 28 watt, suitable for T-5 fittings complete all as specified and directed.

Supply and fixing in replacement electronic ballast 36 watt, suitable for T-5 fittings complete all as specified and directed.

Supply and fixing in replacement LED tube rod 36 watt, suitable for T-5 fittings complete all as specified and directed.

Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm (collected from MES fan store ) any make / model except old vintage, dismantled its stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish as aproved by Engineer - In - chargee cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws etc as required all as specified and directed

All as per item No. 61.00 here-in-before but for exhaust fan of following sizes:-

(a) 400/450mm sweep AC single phase 230/240 volts

(b) 300/380mm sweep - do-

(c) 230/250mm sweep - do-

All as per item No. 61.00 here-in-before but for wall fan/padestal fan of 450mm sweep

S&F condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.

S&F upper set of clips for down rod with rubber Bush (Garari) including set of nut bolts and washer, pin complete all as specified and directed.

S&F rubber bush ( Garari ) for mounted at upper side of down rod clip all as specified and directed

S&F gun metal bush self lubricated, any size ,suitable for ceiling and wall fans complete all as specified and directed

S&F flexible copper conductor stranded 1100 Volt PVC insulated cable three core twisted 23/0.0076 Sq mm size, complete all as specified and directed.

S&F Fan condenser, 230 Volts of the following sizes :-

S&F ball bearing of following sizes :-

(a) NBC/ SKF - 6201'ZZ' (set of two)

(b) NBC/ SKF - 6202'ZZ' (set of two)

(c) NBC/ SKF - 6203'ZZ' (set of two)

(d) NBC/ SKF - 6204'ZZ' (set of two)

Taking down ceiling fan/wall fan from fan hook and disconnection from ceiling rose and dismantling of ceiling parts i e. down rod and connector/condenser nut bolts, split pins, rubber bush (garari) condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed on site. Note: - Only rubber packing (garari) condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately.

Taking down exhaust fan any type and disconnection from ceiling rose and dismantling connector/condenser nut bolts, condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re-fix the same position and testing complete all as specified and directed on site. Note: - condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately

Supply and replacement down rod for ceiling fans duly painted with synthetic enameled paint 300 mm long 19 mm outer dia with holes on both ends of the rod for connection wire replacement complete.

Supply and replacement down rod for ceiling fans duly painted with synthetic enameled paint 600 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete.

Supply and replacement Exhaust fan blade duly painted suitable for 450 mm/380mm sweep complete all as directed .

Supply and replacement Exhaust fan blade duly painted suitable for 300 mm/230 mm sweep complete all as directed .

S&F in replacement of fan blade suitable for 1200mm sweep ceiling fan complete similar to original make with new screws Complete all as specified and directed by Engr-in-Charge.

All as per item No. 77.00 here-in-before but 1400mm sweep.

Supply and replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as directed .

Supply and replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 230/300 mm sweep exhaust fans complete all as specified and directed .

M&L for painting of ceiling fan with two coat synthatic enamel paint after surface preparation including writing/making of MES No size of letters not less than 2.0 CM high and not more than 50 alphabets as approved colour as directed.

Dismantling of cabin fan of any sweep and overhauling complete by means of cleaning of stator, oiling & greasing including replacement of nut and bolt etc. and reassembling the same and testing complete all as specification and directed by Engr-in-Charge .

Dismantling of cabin fan of any sweep and rewinding the stator with super enameled copper winding wire of suitable size including greasing, cleaning of all components of fan reassembling , testing, commission complete all as specification and directed by Engr-in- Charge.

Removing unserviceable bearing shaft welding broken area and threading in lathe machine at appropriate size and refixing in ceiling fan any type complete all as specified and directed.

Taking down unserviceable fresh air fan and S&F PVC fresh air fan of 300 mm sweep in toilets compete with louvers including all civil work like cutting and making opening in existing wall of toilet etc , including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement landscaping LED light 9 watt, mushroom shape, integral decorative, LED bollard with IP 65 protection complete all as specified and directed.

Taking down carefully storage type water heater (Geysers) of any make and any capacity at any height opening for inspection complete Including heating element inner copper tank etc, De-scaling cleaning and re-assembling of Geysers after repairs carrying out and re-fixing in same position including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc all as directed by the Engineer-in Charge. Note:- Spares parts as required for repair geyser shall be measured and paid separately.

Taking down and Supply and Fixing 1.5 KW capacity Heating Element, ISI Marked, Push/ Screw type with ‘O’ ring including making electrical connection complete all as directed by the Engineer-in-Charge.

All as per item No. 88.00 here-in-before but of capacity 2.0 KW

Supply & Fix in replacement of Geyser assembly suitable for 25 ltr capacity, ISI marked including dismantling of old unserviceable geyser assembly complete all as specified & directed.

All as per item No. 90 above but capacity of geysers 50 litres.

Supply & replacement thermostate suitable for 25/50 Ltr Geyser ISI marked complete all as specified & directed.

Supply & replacement of inner tank made of steel suitable for 25 Ltr geyser including dismantling of old unserviceable inner tank complete all as specified & directed.

Supply & replacement inner tank made of steel suitable for 50 Ltr geyser including dismantling of old unserviceable inner tank complete all as specified & directed.

Supply & replacement outer tank made of steel suitable for 25 Ltr Geyser including dismantling of old unserviceable outer tank complete all as specified & directed.

Supply & replacement outer tank made of steel suitable for 50 Ltr Geyser including dismantling of old unserviceable outer tank complete all as specified & directed.

Supply & replacement bottom cover suitable for 25 Ltr Geyser including dismantling of old unserviceable bottom cover complete all as specified & directed.

Supply & replacement bottom cover suitable for 50 Ltr Geyser including dismantling of old unserviceable bottom cover complete all as specified & directed.

Supply & replacement indicating lamp 230 volts 50 HZ AC suitable for geyser any type (round, squire or rectangular type) any capacity complete all as specified & directed.

Supply & replacement sheet metal enclosure with industrial type 3 pin socket and plug including one MCB single pole 32 Amps 240 volts 50 HZ complete all as specified & directed.

Supply & replacement copper connection 15 mm dia 450mm long with both side nut complete all as specified & directed.

Supply & replacement PVC connection heavy duty 15mm dia 450mm long with PTMT nuts complete all as specified & directed.

Supply & replacement pressure release valve suitable for 25/50 Ltr capacity geyser complete all as specified & directed.

Taking out old unserviceable voltage stabilizers of capacity 0.5 KVA to 5 KVA from MES store/site and repair the same in MES work shop (if the transformer found burnt and in same shall be re-winded in the workshop of contractor as directed by Eng in Charge.

Taking out old burnt winding work and re-winded with super enameled copper winding wire (existing size) for 5 KVA voltage stabilizers including all necessary insulating material and testing complete.

All as per item No. 105.00 here-in-before but capacity of voltage stabilizer 4 KVA/3KVA.

All as per item No. 105.00 here-in-before but capacity of voltage stabilizer 2 KVA/1KVA.

Supply, laying, commissioning and testing of PVC insulated, armoured, heavy duty electric cable on wall with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core including aluminium lugs at the termination ends complete all as specified and directed.

All as per item No. 108.00 here-in-before but 10 sqmm 2 core.

All as per item No. 108.00 here-in-before but 16 sqmm 4 core.

S&F in repairs LED driver suitable for 45Watt LED light to suit as existing light fittings of any make complete all as specified and directed.

S&F in repairs LED driver suitable for 60 Watt LED light to suit as existing light fittings of any make complete all as specified and directed.

Supply & Fix cable PVC insulated and PVC sheathed size 4 Sqmm twin core stranded aluminium conductor complete all as specified and directed .

M&L for bracket made of GI of size 40 mm bore pipe, light grade, 1.2 Mtr long bend to shape as per site requirment fixed to pole with 40 x 5 mm -02 Nos size clamps bolts, Nuts, washers incuding painting two coats of aluminium paint over a coat of primer complete all as specified and directed

Taking down existing street light fitting any type and S&F in replacement Integral LED Street light luminaire of 45 W, comprising of pressure die-cast aluminium housing LED street light luminaire, IP-66 protection and with all fixing arangement , nuts, bolts and washer connecting to electric system with 4.0 sqmm 2 core, PVC aluminium stranded conductor of required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed

Taking down existing flood light fitting any type (up to 17 mtr length) and S&F in replacement LED flood light luminaire 120 Watt with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP-66 protection and with all fixing arrangement, nut , bolt and washer connecting to electric system with 4.0 sqmm 2 core PVC aluminium stranded conductor of required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed.

S&F in repairs nature switch sensor only with and including switching timer complete all as specified and directed. [MAKE: KAKATIYA ENERGY SYSTEM/BAJAJ/ HEALER as approved by GE.]

S&F in repairs 3 Pole contactor of AC 3 rating 25 Amp, 3 Phase, 415 V as per IS 13947-4-1 suitable for nature time switch complete all as specified and directed.

S&F in repairs single Pole contactor 16 Amp, single Phase, 240 V as per IS 13947-4-1 suitable for nature time switch complete all as specified and directed.

S&F in repair 3 Pole contactor of AC 3 rating 95 Amp, AC1 rating 160 Amp, type MNX 95, Aux cont 2NO +2NC, 3 Phase, 415 V , as per IS 13947-4-1, complete all as specified and directed.

Taking out old unserviceable cable from trenches of any size and credit to contractor complete all as directed.

Supply, laying, commissioning and testing of UG LT cable, XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty), 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4 core including aluminium lugs at the termination ends.

All as per item No. 122.00 here-in-before but 10 sqmm 2 core.

All as per item No. 122.00 here-in-before but 16 sqmm 4 core.

All as per item No. 122.00 here-in-before but 25 sqmm 3.5 core.

All as per item No. 122.00 here-in-before but 35 sqmm 3.5 core.

All as per item No. 122.00 here-in-before but 16 sqmm 2 core.

All as per item No. 122.00 here-in-before but 70 sqmm 3.5 core.

All as per item No. 122.00 here-in-before but 95 sqmm 3.5 core.

All as per item No. 122.00 here-in-before but 120 sqmm 3.5 core.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.

Returning filling in, including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

M&L sand filling in-trenches with clean dry sand unwashed including gently pruning around cables complete all as specified. Note:-Punned thickness shall be measured & paid.

Supplying and laying Class LV, Type I, flat, size 250mm x 150mm x 40mmfor cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Taking out old rusted pipe and S&F in replacement of GI tubing of 50 mm bore, Light grade, complete with all fittings as required for passing through cables under the trenches, floor ,along the wall or along the pole with suitable size M.S.flat iron clamps incl nut,bolt and washer complete all as specified and directed.

M&L Painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for stree light with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black syenthic paint & painting strips in alternate from bottom to top with three strips of black syenthatic paint & two strips of white fluorescent paint (up to 1.5 mtr height) through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

S&F in replacement of MCCB, 250 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type with adjustable overload setting and adjustable short circuit setting , with thermal release range 200-250 Amp including spreader terminals and phase barriers complete all as specified and directed.

S&F MCCB, 200 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type with adjustable overload setting and adjustable short circuit setting with thermal release range 160-200 Amp including spreader terminals and phase barriers complete all as specified and directed.

S&F MCCB, 160 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 125-160 Amp including spreader terminals and phase barriers. Make L&T (d - sine) Cat No. CM90638OOMO or equivelent in Schinder/ Legrand/Siemens..

S&F MCCB, 100 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type with adjustable overload setting and adjustable short circuit setting , with thermal release range 80-100 Amp including spreader terminals and phase barriers complete all as specified and directed.

M&L cutting PCC/floor/road and taking out cable and making good, including material as per existing after laying of pipe for cable protection all as specified and directed size of trench not more than 0.30 x 0.30 m complete all as specified and directed .

Taking out existing unserviceable street light control box and Supply and fixing MS sheet 2mm thick control gear box for street security light of size not less than 250 (w) x 300(h) x 200(depth) mm with aluminium bus bar of 32 Amps rating for single phase & neutral mounted on epoxy based insulators with locking arrangement fixed to pole with MS clamps -2 Nos of 20 mmx 4 mm and including MCB SP 6 Amps, B curve 230 volt- 01 No complete all as specified and directed.

S&F in repair Analog time switch (FM series) complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 129528.00

Raj Contruction

M/s VIKAS TRADERS

UMESH ENTERPRISES