Contract forVarious works under water supply scheme viz Kiloora,Kharwara Tachloo Tachloo Chitragam, Sugan Dragad,Trenz Turkwangam,AglarHeff Shirmal,Rebon Khujpora,Maldair Heff Khuri,Durpora Cheermarg, Wangipora 2nd and Reshipora Alamgunjincluding in

Amount

WSS KILOORA (Rs. 236.42 Lacs)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329. 150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.150 mm dia pipe.

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):65 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

150 mm dia. (Class I)

100 mm dia. (Class I)

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

80 mm dia

65 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

De-silting of SSFP's & PST by way of removing of silt by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job..The cost includes taking out of filter media and its disposal as per directions of site incharge.Complete job.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Design,Construction,Testing,Successful Commissioning of 0.10 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC..Complete job.

WSS KHARWARA TACHLOO (Rs. 210.00Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150 mm dia Ductile Iron Class K - 7 Pipes

100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

150 mm dia

100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).150 mm dia. (Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end).80mm nominal bore

Providing & fixing of M.S Flanges 12mm thick including cost , nuts, bolts, washers and all sorts of carriages involved up to the site of work. Complete job.80 mm dia.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

80 mm dia.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Extra for shuttering in circular work (20% of respective centering and Shuttering items)

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

De-silting of SSFP's or PST by way of removing of silt by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Design,Construction,Testing,Successful Commissioning of 0.10 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural steel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 300 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

WSS DACHOO CHITRAGAM (Rs. 199.76 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

100 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

100 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

200 mm dia Ductile Iron Class K - 7 Pipes

250 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

150 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).200 mm dia.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and incorporating during concenting G.P strip 1025mm thick water seal at construction joints,nuts,jointing of ends.complete job.

Fabrication/manufacturing of M.S for inlet outlet and disposal arrangements at site complete job

Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

WSS SUGAN DRAGAD (Rs. 130.00Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.150mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

100 mm dia. nominal bore

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 80 mm dia. G.I. pipes

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

65 mm nominal bore

80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

100 mm dia. (Class I)

150 mm dia. (Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

80 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Extra for shuttering in circular work (20% of respective centering and Shuttering items).

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing & fixing of M.S Flanges 12mm thick including cost , nuts, bolts, washers and all sorts of carriages involved up to the site of work incl. successful testing and commissioning of joint. Complete job.80mm dia.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing of PGI sheets 30cm wide for strengthening of joints to check leakages incl. all fixtures and nuts, bolts etc. complete Job .

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc (Heavy class) Up to 300 mm dia.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

TRENZ TURKAWANGAM (Rs. 113.32 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150 mm dia Ductile Iron Class K - 7 Pipes

100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

150 mm dia

100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

80 mm dia. nominal bore

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

150 mm dia. (Class I)

100 mm dia. (Class I)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end).80 mm nominal bore

Supplying,Installation,Commissioning and Testing of Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

80 mm dia.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls. Under 20 cm wide

Columns, pillars, piers, abutments, posts and struts.

Extra for shuttering in circular work (20% of respective centering and Shuttering items).

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329. 200 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 200 mm dia pipes

Supply of stones at site .(Nallah)

Hand-packing stones in wire-crates; excluding cost of crates and stones

Supply of wire crates of approved mesh-size (4"x4") made of 4mm dia wire including weaving, binding sides and partitions, and binding top after filling incl all sorts of carriages involved upto the site of work complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Filling available excavated earth (excl. rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 300 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

AGLAR-HEFF SHIRMAL (Rs. 120.00 Lacs) Part-I:-Civil Componen

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

150 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

100 mm dia. (Class I)

150 mm dia.(Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

80mm nominal bore

65 mm nominal bore

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Providing & fixing of M.S Flanges 12mm thick including cost , nuts, bolts, washers and all sorts of carriages involved up to the site of work incl. successful testing and commissioning of joint. Complete job.100 mm dia

Dismantling D.I. pipes manually/ by mechanical means including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge.Including excavation and refilling trenches after taking out the pipes.Upto 150 mm diameter.

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Making of washout system by way P/F of 150mm dia M.S equal tee and sluice valve 150mm dia (2 No.) of ISI/reputed Make.Complete job.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

80 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Columns, pillars, piers, abutments, posts and struts.

Extra for shuttering in circular work (20% of respective centering and Shuttering items)

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing & fixing of main hole cover with iron base made up of angle iron (50x50x5mm) & lid of 40x40x5mm angle iron fitted with 6mm thick M.S plate .complete job.

Providing & fixing of ventillator/lighting arrangement on the top of dome of size (0.50x0.50 m) with 40x40x5mm angle iron base frame of 1m height fitted with 3mm mesh and fibre glass around the base incl. all fittings and fixtures and all sorts of carriages involved for the completion of job.complete job.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Carriage of material from source upto Dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 14 kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Part-II:-Electro-Mechanical Component(AGLAR-HEFF SHIRMA)

Supply, installation, testing and commissioning of bowl type Horizontal/Vertical type Open well Submersible Raw water pumping equipment as per the specifications in annaxure Z of NIT

Design, supply, Installation, Testing & Commissioning of Submersible Pumping Equipment Suitable for bore well as per the specifications in annaxure Z of NIT .Note: Since the tube well has not been drilled at site as yet , as such the above parameters have been assumed and may vary at the time of actual execution of works depending on the actual well parameters obtained.

Fabrication, Providing and fitting of Modular control panel of appropriate size fabricated out of required thickness SWG sheet having required openings / vents and protection Class : 1P 55 & fitted with accessories as under:-as per the specifications in annaxure Z of NIT. The enclose shall be of excellent fit and finish, corrosion resistant treated and powder coated gliding hinges for smooth and noiseless movement of windows and advanced locking arrangements. The wiring shall be flame retardant and smokeless and of adequate section.Complete job.

Providing and erecting of (04 Nos) 09 mtrs long Hot Dip Galvanized octagonal pole (single section) with bottom diameter (A/F)- 155mm, Top diameter (A/F)- 70mm wide, 3mm thickness with 70 Microns Zinc coating with inside arrangement for providing of power correction with following items:as per detailed specifications in annaxure Z of NIT.

Providing & fitting of 12 volts 25 plate DC battery of 150 AH along with 850 Watt inverter in the operators room including the cost of wiring & 03 NO. lighting points in 3/20 copper conductor with energy saver bulbs fitted in holders along with conduit. Job includes all head loads, carriages, & skilled labours involved at site.Complete job.As per the detailed specifications in annaxure Z of NIT.

Fabrication / Erection of Channel iron column to act as support for resting of monorail crane as per following details:-(Detailed specifications in Annaxure Z of the NIT)

Providing/fitting of manual type chain pully block having following features:-(Detailed specifications in Annaxure Z of the NIT)

Providing, Installation, Testing & Commissioning 50 KVA voltage stabilizer of following specifications:(Detailed specifications in Annaxure Z of the NIT)

Providing & Fitting of 25 mm square single core copper cable of Havells/polycab/finolex make for inter connections laying under ground wherever required from the control panel to the changeover, MCCB, Voltage stabilizer & other system. The job includes the cost of all types of men & machines required. The cable terminals should be crimpled with copper thimbles.(Complete job).

REBON KHUJPORA (Rs. 89.00 Lacs) Part-I:- Civil Component

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).

50 mm dia.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

80 mm dia

65 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35mm Thick.First class kail wood

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing/fixing of C.G.I coloured sheets (ornamental) including cost of J or L hooks, nuts & bolts, washers & all sorts of carriages involved upto the site of work complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and installation of water Geyser 50 ltr of reputed make Like Havells/Recold/Venus, incl nuts bolts ,and all sanitary fittings ,angle valves,cp connections etc complete job.

Providing ,installation and fixing of 1HP water motor of ISI/Rputed make incl. cost of electrical wiring,control switches,pipe work ,fittings,specials and insulation.complete job.

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing of wash basin vitreous china of ISI mark incl cost of fittings and brackets,incl cost of waste pipe , angle valves,cutting and making good the walls whereever required.(450 x 300 mm).

Providing of fixing of sanitary items as under:

15mm dia G.I pipe.(class B)

Providing and fixing brass bib cock of approved quality.15 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing & fixing of sanitary items like,, a soap case and a towel rod,holders,Mirror with mirror shelf incl cost of screws etc complete job .

providing of lighting electric points incl. Cost of wiring,earthing,switches, MCBs,LED Luminaries and cost of wiring from 1.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete job.

Providing,installation and testing of heating points incl. Cost of wiring,earthing,switches, MCBs, switch boards and all accessories cost of wiring from 2.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete job.

providing of 10mm thick service line of reputed make:Havells/L&T/Polycab/Legrand.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

Bricks for an avg. lead of 45 kms.

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Bricks

Part-II:- Electro-Mechanical Component( REBON KHUJPORA)

Supply, installation, testing and commissioning of multistage bowl type Submersible clear water pumping equipment as per the following specifications:-The pump and motor shall be coupled through a steel coupling. The pumping unit shall have to be provided with allied accessories / attachment viz M.S strengthening clamp, pump motor coupling MS trash guard for safety of pumping unit; 10 mtr submersible cable of requisite gauge. The job includes P/F of G.I. Nipples 2’ long having one side threaded and the other side fitted with 16 mm thick M.S. Flange and intermediate flange by way of welding in double layers. The flange so fitted shall have suitable dia. of holes for accommodating bolts etc. The nipple is fitted with submersible pumping unit as per site requirement.Complete job.(Detailed specifications in Annaxure Z of the NIT)

Providing & fitting of 12 volts 25 plate DC battery of 150 AH along with 850 Watt inverter in the operators room including the cost of wiring & 03 NO. lighting points in 3/20 copper conductor with energy saver bulbs fitted in holders along with conduit. Job includes all head loads, carriages, & skilled labours involved at site.Complete job.

P/F of Change over Switch of following specifications:-.(Detailed specifications in Annaxure Z of the NIT)

P/F of Circuit Breaker as following specifications=MCCB.

P/F of MUG 30 starter of L&T make.Complete job (Detailed specifications in Annaxure Z of the NIT)

Modification of gantry by way of P/ welding of 2foot X 2 foot chaquered plates to base of guirders both horizontal as well as vertical posts. Job includes P/F of nuts bolts required as per site. Job includes arrangement of welding set & welder also. Job includes P/F of angle iron ladder/ supports to the gantry & grouting of gantry in 1:2:4 cement concrete mix to make it accident free. Complete job..(Detailed specifications in Annaxure Z of the NIT)

Supply,installation,testing& commissioning of MS tubular poles 02 No. at substation of 9m height, 410 (SP33) conforming to IS 2713 (part 2) 1990 as per REC standard welded with 40X40 sq. inch in size & 4mm thick MS plate at the bottom & having dully drilled holes at various sections for accommodating MS fasteners for holding channels for fitting of GO link set assembly. The erection of poles is carried out by grouting the pole in a circular cement block of 450mm in diameter & of total height equal to 1500mm (1200mm below the ground level & 300 mm above the ground level). The job includes P/ laying of stone soling of 200mm thick followed by P/ laying of PCC in 1:2:4 mix up to height of 1500mm. The job includes P/F of 04 No. of ISMC 75mm of 9 feet long for isolation of GO link set through screwed fasteners. The job includes cost of painting of poles with 2 coats of red oxide paint including black painting up to height of 1.5 m from bottom & the top with silver shade as per REC standard. The job includes providing & fitting of 02 No. sign board indicating “ 11000 Volt Danger” in Red color.( Spiral earthing of HT poles having suitable number of turns as per the REC norms & anti climbing feature are included in the job).Complete job..(Detailed specifications in Annaxure Z of the NIT)

Providing,fixing,testing& commissioning of 11 KVA GO link set ( 3 pieces) of reputed make as per REC standard including pipe of suitable length & diameter for its operation . The job includes earthing of link set handle as per REC norms included in the job.Complete job..(Detailed specifications in Annaxure Z of the NIT)

Supply,installation,testing& commissioning of MS tubular poles 01 No. at substation of 9m height, 410 (SP33) conforming to IS 2713 (part 2) 1990 as per REC standard welded with 40X40 sq. inch in size & 4mm thick MS plate at the bottom & having dully drilled holes at various sections for accommodating MS fasteners for holding channels. The erection of poles is carried out by grouting the pole in a circular cement block of 450mm in diameter & of total height equal to 1500mm (1200mm below the ground level & 300 mm above the ground level). The job includes P/ laying of stone soling of 200mm thick followed by P/ laying of PCC in 1:2:4 mix up to height of 1500mm. The Job includes P/F of V cross & pin insulators also with spiral earthing & guy wire.Complete job.

P/F of .05 ACSR with pin insulators

Providing and erecting of (04 Nos) 09 mtrs long Hot Dip Galvanized octagonal pole (single section) with bottom diameter (A/F)- 155mm, Top diameter (A/F)- 70mm wide, 3mm thickness with 70 Microns Zinc coating with inside arrangement for providing of power correction with following items:

Supply, Installation, Testing & Commissioning of horizontal pumping equipment of following specifications

Fabrication, Providing and fitting of Modular control panel of appropriate size fabricated out of required thickness SWG sheet having required openings / vents and protection Class : 1P 55 & fitted with accessories as under:-

MALDERA HEFF KHURI (Rs. 130.00 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.150mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

100 mm dia. nominal bore

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.40 mm and 50 mm dia. G.I. pipes

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

100 mm dia. (Class I)

150 mm dia. (Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).

50 mm dia.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

80 mm dia.

65 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Extra for shuttering in circular work (20% of respective centering and Shuttering items).

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing & fixing of ventillator/lighting arrangement on the top of dome of size (0.50x0.50) with 40x40x5mm angle iron base frame of 1m height fitted with 3mm mesh and fibre glass around the base incl. all ffittings and fixtures and all sorts of carriages involved for the completion of job.complete job.

Providing and fixing of main hole cover made up of 40x40x5mm angle iron base frame fitted with 4mm thick M.S Plate.complete job.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.

cement & steel from Divl. Store for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

DURPORA CHERMARG (Rs. 253.97 Lacs)Part-I:-Civil Compone

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.100 mm dia Ductile Iron Class K - 7 Pipes

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work):100 mm dia. nominal bore

Providing and fixing of M.S flanges incl. cost of nuts,bolts & washers complete.

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).100 mm dia. (Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

80mm nominal bore

65 mm nominal bore

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

150 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Dry random rubble masonry with hard stone in foundation and plinth:With bond stone.Quarry

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35mm Thick.First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm thick.First class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood.35mm thick

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand)

Precast terrazzo tiles 22mm thick with graded marble chips of size upto 12 mm, laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing polishing and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand): Light shade using white cement

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and installation of water Geyser 50 ltr of reputed make Like Havells/Recold/Venus, incl nuts bolts ,and all sanitary fittings ,angle valves,cp connections etc complete job.

Providing ,installation and fixing of 1HP water motor of ISI/Rpute make incl. cost of electrical wiring,control switches,pipe work ,fittings,specials and insulation.complete job.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size )

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S.topcover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

providing of lighting electric points incl. Cost of wiring,earthing,switches, MCBs,LED Luminaries and cost of wiring from 1.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete

Providing,installation and testing of heating points incl. Cost of wiring,earthing,switches, MCBs, switch boards and all accessories cost of wiring from 1.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete

providing of 10mm thick service line of reputed make:Havells/L&T/Polycab/Legrand.

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing of salem stainless steel kitchen sink of ISI mark 304 (18/8) as per IS 13983 with C.I brackets and S.S plug 40mm incl painting of fittings and brackets,incl cost of waste pipe ,cutting and making good the walls whereever required.(610x510x200mm).

Providing of fixing of sanitary items as under:

15mm dia G.I pipe.(class B)

Providing and fixing brass bib cock of approved quality.15 mm nominal bore

Providing and fixing of wash basin vitreous china of ISI mark incl cost of fittings and brackets,incl cost of waste pipe , angle valves,cutting and making good the walls whereever required.(450 x 300 mm).

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing & fixing of sanitary items like,, a soap case and a towel rod,holders,Mirror with mirror shelf incl cost of screws etc complete job .

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Centering and shuttering including strutting, propping etc. and removal of form for:

Columns, pillars, piers, abutments, posts and struts.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Design, testing and successful commissioning of RCC Over Head Tank (shell type) with architectural features of 0.35 lac gallons capacity in single compartment with 20.4 mtrs staging height (above ground) including providing and fixing of rising main, supply main, washout, overflow connected with supply main 100mm dia pipe with flanged joints 12mm thick flanges, washers, nuts, bolts, welding, 100mm dia sluice valves including tail pieces, nuts, bolts, washers, fixing cost of 100mm dia GI pipe Class “B” with standard pipe fittings such as tees, bends, nipples, cutting of threads, sluice valve of VAG/AVK (kirloskar make) including tail pieces and all necessary accessories such as lightening arrester, water level indicator, RCC stair from ground level upto tank floor levels gallery along inside columns gallery upto top of dome and inside the tank with side steel railing, ventilating cowls, main hole covers of M.S. steel sheet with angle iron frame and M.S. railing with stair and roof flooring vertical pipe lines, top water contained should not be permitted, including levelling of ground and boulder filling inside the tank upto door level including providing fixing of MS door with frame of angle iron including priming/snowsem of tank surface outer side. Complete job.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 20km

Quarry stone for an avg. lead of 45km

Bricks for an avg. lead of 45 kms.

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 600 mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Quarry stone for an avg. lead of 45km

Bricks

Part-II:-Electro-Mechanical Componen

Providing/Installation/testing & commissioning of Horizontal pumping equipment having discharge capacity of 10000 GPH and head 70meter coupled to 25 HP Horizintal motor fitted on angle iron base frames.complete job.

P/F 230 m ,100mm Dia. flanged rising main and with bends, control valves, nuts and bolts.complete job.

fabrication and erection of overhead MS Gantry with one no electrically operated chain pulley block(winch machine) of 3-5 ton capacity and other necessary items as per site requirement including Gravel Hopper ,P gravel etc.complete job.complete job.

P/ fitting of Modular type 200 A L.T motor control panel fitted with all necessary items complete with Bus bar module, Meter module, with inbuilt FASD/MUG Starters c/w auxiliary unit.complete job.complete job.

Providing/Installation/testing & commissioning Of 75 kVA manually operated Copper wound, oil cooled, three phase voltage stabilizer fitted with voltmeters on input and output and also with phase indicators.complete job.

Providing/Installation/testing & commissioning of 25 mm2 XLPE/Cu conductor/Submersible Cable for panel board and for inter connections to Pump/motor units along with Rubber sleeve/Flexible Conduit.complete job.

creation of 100 KVA, three phase electrical substation complete with HT transformer, HT/LT lines to be laid on 9 m long steel tubular poles complete with safety devices, Conductor and other necessary fixtures c/w H.T Trivector Meter of 11Kva/33Kva Feeder.complete job.

P/F of service line XLPE 50 sq mm 3.5 core cable as service line from H.T transformer to switch fuse unit and up to DG set.

Supply/Installation/testing & commissioning of 50 KVA Air cooled DG set canopy type with battery & charger, fuel tank, electric control panel complete with electrical works like P/F of change over switch etc.complete job.

electrification of pump house, operators quarters and premises.omplete job.

earthing of electric motors, voltage stabilizers, LT panels and other electrical gadgets

providing of tools / tackles/ shock proof matting and other facilities for operational staff.

Fabrication and errection of CGI /wire mesh covered and CGI roofed DG set Shed of 15’ X 15’ including cost of electrification inside.complete job.

P/Fitting of Ultrasonic/Electromagnetic Flow Meter of any reputed make.

Supply/Installation/testing & commissioning of additional 100 KVA HT Transformer as stand by.complete job.

WANGIPORA 2nd (Rs. 247.48 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

200 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

200 mm dia

150 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

100 mm dia. (Class I)

200 mm dia. (Class I)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):65 mm nominal bore

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

150 mm dia

100 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platforms.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

De-silting of SSFP's & PST by way of removing of silt by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job..The cost includes taking out of filter media and its disposal as per directions of site incharge.Complete job.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Design,Construction,Testing,Successful Commissioning of 0.17 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Complete job.

Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

RESHIPORA ALAMGUNJ (Rs. 104.00 Lacs

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).100 mm dia. (Class I)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):65 mm nominal bore

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Mechanical Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

100 mm dia

80 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

De-silting of SSFP's & PST by way of removing of silt by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.

cement & steel for an avg. lead of 20kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

R & B Infra Project Private Limited

ME PROJECT PRIVATE LIMITED