8464 REPAIRS / REPLACEMENT OF PLUMBING CLEANING OF WATER TANK, INTERNAL WATER SUPPLY FITTINGS, PVC TANKS AND OTHER MISC WORKS IN AFMC UNDER GE (CENTRAL) PUNE

Amount

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area exc 1.50 Sqm but not exc 4.00 Sqm & removing from site all as directed.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area not exc 1.50 Sqm & removing from site all as directed.

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 Sqm & removing from site all as directed.

Taking down shutter of any description area not exc 1.00 Sqm & removing from site all as directed.

S & F Second class hard wood plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as soecified and as directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc one brick but not exc two bricks & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as soecified and as directed.

S & F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as soecified and as directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as soecified and as directed.

S & F Factory made any colour solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F factory made any colour solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg give on page 176 of SSR 2020 Part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. complete all as specified and directed.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, neoprene rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F in repairs 100mm size mild steel 4 Lever mortice lock, vertical type complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

S & F 100mm long mild steel but hinges medium weight colld rolled all as specified and directed.

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and directed.

Supply and fix 150mm long Extruded aluminium alloy powder coated handles, fabricated type all as specified and directed.

S & F 300mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

Supply and fix 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Supply & fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel, with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as directed

S & F 3.00mm thick sheet glass ordinary quality & glazing with oil putty area in squares not exc 0.50 Sqm in each pane all as specified and directed.

S & F 3.00mm thick figured glass, pin head type & glazing with oil putty area in squares not exc. 0.50 Sqm in each pane all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specifiedand as directed.

S & F 75mm aluminium anodised Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water all as directed.

M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth without extra cement complete all as soecified and as directed..

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4),finished the surface even and smooth without extra cement complete all as soecified and as directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistent primer all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Material and labour for Joint free Non skid coloured ceramic tiles (Matt finish) of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

M & L for coloured glazed or matt finished ceramic tiles of size 300mm x 450mm x 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land and complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

M & L 20 to 25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

M & L for 20 to 25mm thick machine cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

All as per item No 41 above but kota stone slab as in riser of steps, skirting , dado and pillar and applying oxalic acid ,wax polish to obtain mirror polish finished laid over and including 10mm thick baking coat of CM 1:3 on any type of masonery surfaces including dismantling of existing of stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

Drilling holes for bolts, pipes etc not exc 25mm dia in granite or trape stone for gas connection pipe complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

Material and labour (Full body) Virified Ceramic tiles (any shade) of size 600mm x 600mm x 9 to10mm thick (square/ rectangular) polished as in floor set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 45 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

S & F in repairs Vitreous china Wash Hand Basin Counter Top (over or under counter) Oval shape of Size 560mm x 470mm excluding pillar taps & waste pipe but including Waste coupling chromium plated complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock copper alloy, chromium plated , fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed complete all as specified and directed.

S & F in repairs chromium plated, Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps two way type , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 32/50mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and fix in repairs 15mm bore dia pillar taps of cast copper with capstan head chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

Supply and fix in repairs 15mm bore dia swan neck pillar taps, cast copper with capstan head , chromium plated, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repairs Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450mm all as specified and directed.

S & F in repairs Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs S S grating dome of 100 mm dia (min wt - 25 gms) to floor traps all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as directed.

Supply and Fix 15mm bore dia CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

S & F 20mm bore dia UPVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc including all required fittings including taking down steel / UPVC / CPVC tubing and connections complete all as specified and directed.

Supply and fix 75mm bore dia out let PVC (SWR) floor trap / Nahani trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F in repairs 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S & F in repairs 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S & F stack clamps suitable for 100mm bore dia pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) bends with access door of any radius complete all as specified and directed.

S & F 75mm bore dia PVC (SWR) bends with access door of any radius complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore diaPVC (SWR) vent cowl complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board made of stainless steel 1.00mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm , bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S & F 500 Ltr capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 1000 Ltr capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Disconnecting existing tank of capacity exc 250 Litres but not exc 500 Litres, setting aside (or lowering if required) for repairs, cleaning etc, Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required, reconnecting and refixing to its original or other position all as directed.

Disconnecting existing tank of capacity exc 500 Litres but not exc 1000 Litres, setting aside (or lowering if required) for repairs, cleaning etc, Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required, reconnecting and refixing to its original or other position all as directed.

Disconnecting existing tank of capacity exc 1000 Litres but not exc 2000 Litres, setting aside (or lowering if required) for repairs, cleaning etc, Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required, reconnecting and refixing to its original or other position all as directed.

S & F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size ( 600mmx600mm) using hot dipped galvanised steel section, exposed surface with precoated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mmx32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick prestraightened GI wire on main runners including making niches for fans / light including dismantling of Wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed.

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

M & L for filleting in any position & to any shape, sectional area exc 25 Sqcm but not exc 50 Sqcm in CM 1:4 including all mitres stops etc complete all as specified and as directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thick (below or above ground level) complete all as directed.

M & L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base / flooring / paving complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-2, using 40mm graded aggregateas in foundation, filling in mass concrete for manholes & drains all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type B-2 , using 20mm graded aggregate as in plinth protection / hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

PRASHANT CONSTRUCTION

M/s Omkar Associates

Mukund Engineers and Contractors

M/s.BAJRANG CONSTRUCTION

Suma Construction

Parhar Enterprise

Mourya Enterprises

shiva traders