Construction and Commissioning of 2 Nos. 200mm dia TW in Sushilpura Zero Number gali,Navdurga Colony and Nagar Maa Shakambhari Nagar area in , ward 45, supply and installation of energy efficient 5 star submersible pump sets(ISI) in City Dn. II

Construction of Tube Well from ground level and upto 100mtr. depth to accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated fonnation such as pebbles, boulders etc. by percussion/ rotary drilling method as per IS:2800 Part 1:1991 & Part 2: 1979 (both amended up to date) and technical specifications, with gravel as per IS 4097-1967 and its packimg as per IS 2800 (Part I & II) : 1979 as amended upto date (the work includes the cost of gravel and its primary packing and packing during developments, lowering of housing and strainer assembly pipes with supply and wrapping of coir rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly) The work will be completed after obtaining sand free water. .Nominal Bore 200 mm. dia. Rates are exclusive of GST

Construction of tube well after completion of drilling by rotary method &upto 150 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. Rates are exclusive of GST 200 mm Nominal Dia

Add 15% extra on above item (Item No 2.3.1 to 2.3.3) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. Rates are exclusive of GST

Supply & Fixing tube well cover of MS sheet 8mm thick at top &Smm thick 100 mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both end in 80mm sizes passing through a hole in the centre of MS sheet. A 25mm socket with end plug shall also be welded over top plate (as per drawillg enclosed). A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall tie provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200 mm dia Rates are exclusive of GST

Labour charges for making slots on blank pipes made of ER W MS black pipe ISI marked of following sizes, the slotting should be as per IS:8 I 10- 1985. 200 mm dia nominal bore of5.4 mm thickness Rates are exclusive of GST

Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per JS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Up to 5.5 KW (7.5 HP) & head upto 120 mtr.rates are exclusive of GST

Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 including making connection etc. 3 core 4.0 mm2 Rates are exclusive of GST

Providing and laying PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS 1554 category-I and approved make of including excavation of 30 cm x 75 cm side trench as per IS-1255 15 cm thick under layer of sand II class brick covering, refilling earth in the remaining portion making necessary connection including testing etc of required size 4 core (category-I) make as mentioned in specification. This includes all required Hardware material , termination end with suitable crimping lugs. Rates are exclusive of GST 16 SQMM 4 core

Providing &Lowering in tubewell ISl marked GI Pipe "B" class as per IS: 1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. Rates are exclusive of GST a) 50 mm dia

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Rates are exclusive of GST Above 5 HP and up to 10 HP