PROVN OF LIFT IN NEW SURGERY BLDG OF ADC (AHRR) UNDER GE E/M RR HOSP, DELHI CANTT-10

Amount

(a) Designation of Lifts - PMS Gearless Machine Room Less lift

(b) Drive - micropreocessor based V3F

(c) Location of machine room - N/A MRL

(d) No of Stops - 04

(e) Capacity - 15 Passenger (1020 Kg)

(f) Power Supply - 415 V Three phase 50 Cycles AC

(g) Auxiliary - Single Phase 220V 50 Cycles AC

(h) Speed - 1.0 M/sec

(j) Well Dimension - Existing pit

(k) Head Room - Existing

(l) Car Ceiling - Stainless steel Hairline finsih.

(m) Car Panels - Stainless Steel Hairline finish.

(n) Car Flooring - 20 mm recess for stone incl provn of black granite stone (Min 13mm thick)

(o) Car illumination - LED

(p) Car entrance - As per site requirement in Stainless steel Hairline finish.

(q) Door safety - Full height infra red safety curtain.

(r) Landing Entrance - As per site reqmt in stainless steel Hairline finish.

(s) Clear Opening - Min 800 mm (W) x 2000 (H)

(t) Control - full collective simplex.

(u) Car Indicators - as per manufacturer

(v) Landing Indicators- as per manufacturer

(w) Direction & position indicator in car.

(x) Emergency Alarm system

(y) 2 Phase fireman drive

(z) Hands free press & speak intercom incl three core wiring

(aa) Full height infra red safety curtains.

(ab) Pit ladder

(ac) Tubular Handrail 35mm or higher OD on all three sides of wall.

(ad) Signal fixtures in stainless steel finish.

(ae) Emergency light with rechargeable bty.

(af) Adjustable guide shoes.

(ag) Micro movement LED based buttons.

(ah) +10% to - 10% volt fluctuation withstand capacity.

(aj) Automatic rescue device with maint free bty operated to bring the car cage to the nearest floor level in case of power failure. Emergency light and at least one car fan inside the lift car shall be operator till the rescure operation and an audio and visual indiator shall be provided inside car to alert person trapped inside.

(ak) Load weighing device.

(al) Automatic Phase reversal.

(am) Car door lock as standard for safety features.

(an) Manual rescure features and overload relays and warning device.

(ap) Daily automatic brake testing features.

(aq) One inspection lamp and one power socket 5/15 Amps on top incl wiring connection

(ar) DO's and Don’t's chart and important tele numbers on acrylic plates have to installed in side.

(as) Providing one transparent space for other instrs size as per reqmt.

(au) painting work with super enamled synthetic paint on all the exposed surfaces all as directed,

(av) Display chart of wiring diag of lift control panel.

(aw) Provn of point wiring in lift well / shaft with FRLS copper cable multistranded 1.5 Sqmm incl earth wire, LT 1100 v grade in PVC surface conduit for min 6 points incl bulk head (10W) LED type and two 5 Amp switch socket combination with all connection complete.

(ax) Provn of travelling cable with copper conductor FRLS of suitable size & core or required wiring to intercom speaking, connect to complete cell and provn of through and other accessories.

(ay) Necessary civil work such as making good disturbed surfaces, modification to landing space to make it suitable to car size necessary foundation to machine, , distamper to the existig pit/shaft etc deemed to be included in the quoted rate.

(az) Handicapped friendly buttons.

S&F sheet metal enclosure powder coated double door IP-43 dust and vermine proof vertical type suitable for MCCB as incomer and outgoing duly fixed / grouted on wall/floor on anle iron frame in and providing following items complete all as specified and directed. (i) MCCB 100 Amps, TPN 25KA, 50 Hz, 415 volts with thermal magnetic release type - 01 Nos (Incoming) (ii) MCCB 63 Amps, TPN 25 kA, 50 Hz, 415 Volts with thermal magnetic release type- 01 Nos (Outgoing) (ii) RCCB / ELCB, 63 Amps, 300 mA, 4 pole - 01 Nos (iii) MCB 20 Amps, 10 Ka, SPN-02 Nos (iv) Phase seqence corrector - 01 Nos. (v) RYB indicators. (vi) Digital Volt and ammeter.

Supply & fixing cable PVC insulated armored and PVC sheated LT 1100 volts grade with aluminum conductor of size 50 Sqmm 3.5 Core fixed to wall or floor including cable protection cover and saddles of suitable size.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm buried directly in ground not less than 2.25 Mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts, check nuts and washers of galvanised iron and 32x6mm GI strip Procter by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-1 , using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg /Sqm and 6mm dia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mashand medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip up to main earthing complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I all as specified and directed . (i) Main earthing strip from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item.

Supply and fix aluminium strip 32x6 mm complete with saddles and fixing screws for fitting the strip incl test point complete all as specified.

M/s Dhapola Elevator and Engineering (BID ID -3096207)

MB Enterprises (BID ID -3092716)

V S BUILDER (BID ID -3104561)

J D ENTERPRISES (BID ID -3104178)

Escon Elevators Pvt Ltd (BID ID -3095400)

Akarsha Enterprises (BID ID -3097569)