Setting up of the Smart Class Room Facility for the Centre of Excellence under Design Studio in CSIR-CLRI, Adyar, Chennai-600020

Amount

Civil Items

CEMENT CONCRETE (CAST IN SITU) Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

REINFORCED CEMENT CONCRETE Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

MASONRY WORK Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand) : With F.P.S.(non modular) bricks

CLADDING WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

WOOD AND P. V. C. WORK Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Note: Rate including wheather proof sealent. Make: Qute/Fanesta or quiavalent Fixed window/ ventilator without mullion /transom. Using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre)

Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above). (Height upto 1.2 metre)

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Top fixed Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height as per site requirement).

STEEL WORK Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered and rate including fixing accessories such as nuts, bolts, fasteners, making core cutting holes in the stone slab, fixing accessories, welding etc.).

FLOORING Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 1000x1200 mm

FINISHING 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement: 6 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

French spirit polishing : Two or more coats on new works including a coat of wood filler and scrapping existing coating.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

REPAIRS TO BUILDING Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts (rate including 6 nos of hold fast for each frame as per the direction of Engineer-in-charge), embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats

Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Dismantling and Demolishing Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

ALUMINIUM WORK Providing and fixing glazing in aluminium/UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

NEW TECHNOLOGIES AND MATERIALS Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing factory made single extruded WPC(wood Polymer Composite) solid door comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100gms) fabricated with mitter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N(face) & 1100N(edge). minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of Class A category with property of being termite proof and fire retardant. WPC to be finished with 12-20mm fluted charcoal panel on one side and 1mm laminate on the other side as per desired pattern with grooves as per drawing/instructions fixed with synthetic resin conforming to IS-848 and fixed in position with minimum of three SS butt hinges of required size equally spaced with top of the top hinge 100 mm from the top edge of the shutter with necessary full body threaded star headed counter sunk ss screws, all as per direction of Engineer in charge.FLUTED PANEL: EUROPRATIK-CASSA / EQUIVALENT. WPC DOOR: CENTURY/ EQUIVALENT, WPC DOOR FRAME: CENTURY/EQUIVALENT. FLUTED CHARCOAL DOOR - 32MM WPC FLUSH DOOR FINISHED WITH FLUTED CHARCOAL PANEL.

Providing and fixing factory made single extruded WPC(wood Polymer Composite) solid door CNC routed of approved design by engineer in charge which are machine cut for usage as vision panel for Doors, comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100gms) fabricated with mitter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N(face) & 1100N(edge). minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of Class A category with property of being termite proof and fire retardant. WPC to be finished with 1mm laminate on both the side as per desired pattern with grooves as per drawing/instructions fixed with synthetic resin conforming to IS-848. the cut out portion is to be fixed with 8mm thick clear float glass with edge polishing & round smoothenend exposed edges, fixed with double 14mmx25mm thick teak wood moulding as per design. The exposed surface of wood shall be PU polish in desired shade. The door is fixed in position with minimum of three SS butt hinges of required size equally spaced with top of the top hinge 100 mm from the top edge of the shutter with necessary full body threaded star headed counter sunk ss screws, all as per direction of Engineer in charge.FLUTED PANEL: EUROPRATIK-CASSA / EQUIVALENT. WPC DOOR: CENTURY/ EQUIVALENT, WPC DOOR FRAME: CENTURY/EQUIVALENT. WPC FLUSH DOOR WITH VISION PANELS AS PER DESIGN + WPC FRAME FINISHED WITH LAMINATE + AUTO CLOSE HINGES + PRIVACY STICKERS ON GLASS + HARDWARES

Fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of MOISTURE RESISTANT GYPSUM ply to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the ply with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for ply, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting.Brand: USG Knauf/ Equivalent MOISTURE RESISTANT GYPSUM BOARD FALSE CEILING - 2 LAYER STEPPED FALSE CEILING OF 0.15 & 0.3M FROM TRUE CEILING - FINISHING AS PER SPEC

Providing & Fixing of fibre Glass Acoustical Suspended Ceiling System with 20mm thick Optra Microlook (Knauf or equiquavalent) 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. Properties of Tile : Relevant Standards Base Material : Fibre Glass Panel Dimensions : 600 x 600 m (Nominal) ,593 x 593 mm (Actual) Panel Thickness: 15mm Panel Weight :2.3kg/m2 (15mm) Recycled Content 85%. Noise Reduction Co-efficient : 0.85 – 0.95 ASTM C423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) Fire Properties : Class 0/1 BS 476 Part 6/7 Light Reflectance : 88% ASTM E-1477 Humidity Resistance : RH 95% Dimensional tolerances : ±3mm SUSPENSION: The tile shall be laid on KNAUF Silhouette 38 profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth” notches to provide mitred cruciform junctions colour global white (Matching to tile color). Grid shall have double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of 0T bending capability

Suspension System Details Base Material : Hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability Construction Method : Roll formed double stroked rotary stitched construction to mechanically lock together the two metal layers of the vertical web Deflection Loading : 15 kg/m with deflection limit less then L/360 as per ASTM C635 Pull-out Strength : 100 kg Main Runner Dimensions : 3000(L) x 38(H) x 15(W) mm Cross Tee Dimensions : 1200/ 600(L) x 38(H) x 15(W) mm Cross Tee End Detail : The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam” Wall Angle dimensions : 3000(L) x 19(H) x 19(W) mm Main Runner Rout Spacing : 150 mm Hanger-wire Material : Galvanized Steel with 0.7-micron coating Hanger-wire Dimensions : 2.5 mm Ø x 1800 mm Hanger-wire Tensile Strength : 344-413 MPa Hanger-wire Pull Strength : 110 Kgs

INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using KNAUF suspension system (specifications above) at 1200mm maximum. The First/Last KNAUF suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be KNAUF wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per KNAUF recommended procedure KCS SUSPENSION SYSTEM accessories supplied by KCS consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners). 15mm thick Mineral Fibre Acoustic Grid Ceiling Sysytem

Providing and Fixing - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown). or in the color specified by the Architect / Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown) . The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels. Make:Amstrong Acoustic sapces or equivalent PROVIDING AND FIXING AMSTRONG ACOUSTIC SAPCES

Providing and fixing blackout roller blinds with 100% polyester fabric, with 0.6mm (+/- 5%) fabric thickness & fabric weight of 335gsm (+/- 5%) . lightfastness of > or = 5-6 grade depending on the choice of colour. rubbing fastness > or = 4-5. Lead Free, Fire Retardant, Very High Tearing Strength Mechanism for roller blind with plain casette cover and required fitting all complete as per the direction of Engineer-incharge. brand: Vista or equivalent.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment . Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: Anti-Termite Treatment- Post Construction Operation Details (i) Drilling at every one foot interval at wall and floor junction. (ii) Drill depth 4-5 inches on both sides. (iii) chemical used- Imidachloprid 30.5 S.C.[Bayer India or equivalent] (iv) Chemical injection done very half an hour up to saturation point(min 4-5 times). (v) Complete electrical conduits /junction boxes chemical treatment.[oil based] (vi) Plugging of holes after chemical injuction. (vii) On completion of work a warranty for a period 5 years is given for the site. (viii) Dliute and injecting Chemical emulision for POST CONSTRUCTIONAL anti-termite treatment(Including the cost of chemical emulsion) (ix) Treatment of existing mansory using chemical emulsion @ one litre per hole at 300mm interval them with cement motar 1:2 (1 cement: 2 coarse sand ) to the full depth of the hole with Imidachlopride chemical.

Providing and fixing SS designer handles, with latest design as per approval of Engineer incharge any model or finish, with necessary SS screws etc. complete : 300mm

Civil Items - Buy Back

Buy-back of existing Aluminium windows/metal false ceiling of frames with grill, shutters, glazing, fittings, false ceiling tile etc all complete including and making good the brick work and required repair plasetering etc as per the direction of In-Charge. Any size.

Buy-back of existing Ms windows of frames with grill, shutters, glazing, fittings all complete including dismantling and making good the brick work and required repair plasetering etc as per the direction of In-Charge. Any size.

Electrical items

MODULAR LIGHT/FAN PT: Wiring for light / fan / exhaust fan / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size GI. box and earthing the point with 1.5sqmm. FRLS PVC insulated copper conductor single core cable etc., as required. Make: FINOLEX/ANCHOR ROMA/HAVALLS/Legrand

A.C. POINT: Supplying and fixing suitable size G.I box with modular plate and cover in front on surface/recessed including providing and fixing 25A socket outlet and 25A modular SP MCB,"C" curve including connections, testing and commissioning etc.as required. Make: Legrand/L&T/MK

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE:HAVALLS/FINOLEX/POLYCAB/VASAVI/ AVAN PLAST 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE:HAVALLS/FINOLEX/POLYCAB/VASAVI/AVAN BLAST 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE:HAVALLS/FINOLEX/POLYCAB/VASAVI/AVAN BLAST 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

PVC Pipe 32mm: Supplying and fixing of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm Make: Vasavi/Avonplast/Finolex

MODULAR 5A SWITCH : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 5/6 amp switch

MODULAR 5A SOCKET : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 5/6 amp socket

GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 1 or 2 Module (75 mm X 75 mm)

PVC Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 3 Module (75 mm X 75 mm)

PVC Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 6 Module (200 mm X 75 mm)

THREE PHASE DB : Supplying and fixing of 6 way surface/recess mounting, horizontal type three pole and neutral, sheet steel, MCB distribution board,415V, on surface/recess, dust protected, duly powder painted, inclusive of 200A tinned cuppoer bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. MAKE: LEGRAND/L&T/HAVALLS 8 way (4+24), Double door

THREE PHASE DB : Supplying and fixing of 6 way surface/recess mounting, horizontal type three pole and neutral, sheet steel, MCB distribution board,415V, on surface/recess, dust protected, duly powder painted, inclusive of 200A tinned cuppoer bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. MAKE: LEGRAND/L&T/HAVALLS 6 way (4+18), Double door

SINGLE PHASE DB: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havels/Legrand/L&T 12 Way, DOUBLE DOOR

CABLE END BOX: Supplying and fixing of cable end box ( Loose wire box) suitable for following TPN Vertical type, sheet steel,MCB distribution board,415V on surface/recess,complete with testing and commissioning etc.as required. Make: Havells/Legrand/L&T For 12 way,Double door SPN MCB DB

CABLE END BOX: Supplying and fixing of cable end box ( Loose wire box) suitable for following TPN Horizontal type, sheet steel,MCB distribution board,415V on surface/recess,complete with testing and commissioning etc.as required. Make: Havells/Legrand/L&T For 8 way,Double door TPN MCB DB

MCB: Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Havells/Legrand/L&T Single pole

DOUBLE POLE MCB: Supplying and fixing 32 amps rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. Make: Legrand/L&T/Havells 32 amps Double pole

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and copper/aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper/aluminium conductor cable of 1.1 KV grade as required. Make: LOTUS/COMET/DOWELLS 4 x 10 SQMM (25mm)

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and copper/aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper/aluminium conductor cable of 1.1 KV grade as required. Make: LOTUS/COMET/DOWELLS 4 x 16 SQMM (28mm)

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: LOTUS/COMET/DOWELLS 4 x 35 SQMM (32mm)

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: LOTUS/COMET/DOWELLS 3.5 x 185 SQMM (57mm)

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: LOTUS/COMET/DOWELLS 4 x 50 SQMM (35mm)

REMOVAL OF EXISTING OLD LT PANEL: Removing of existing 3 phase LT Power panel and surface of wall/floor mounted & it incoming & outgoing's disconnecting the existing power cables connections without any damage etc. The work also include providing temporary power supply to the essential existing loads as required.as directed by the site Engineer.

REMOVAL OF EXISTING 3 PHASE LIGHTING PANEL BOARD: Removing of existing 3 phase Lighting Panel and surface of wall/floor mounting type & it incoming & outgoing's disconnecting the existing power cables connections without any damage etc. The work also include providing temporary power supply to the essential existing loads as required.as directed by the site Engineer.

MAIN PANEL BOARD: Supply, Installation, Testing & Commissioning of cubical pattern power distribution panel, modular compartmentalized, floor/wall mounted type with 40X6 mm thick MS angle frame , 3 phase and neutral MCCB power distribution board fabricated with suitable size, 14 SWG CRCA sheet powder coated/load/non-load bearings and earth bus consisting of the following as required: (a) Incomer:One chamber consisting of suitable size with mounting arrangements,supplying and fixing of 1no 4 pole 400A, 50kA MCCB (Make: Havalls/L&T/Legrand) (b) Out going MCCB: (i) 1 No 200 A, 35kA, 415 V, FP MCCB (ii) 2 Nos. 100 A, 25kA, 415 V, FP MCCB (iii) 3 No's 63 A, 16kA, 415 V, FP MCCB The above MCCBs should be Havalls/L&T/Legrand make and to be mounted in individual chambers consisting of suitable size with mounting arrangements. (c) Suitable front operated handle in all MCCB's with auxillary contact and Suitable size insulated colour coded Aluminium bus bars chamber along with Aluminium earth bus for entire system. (d) Interconnection with suitable size insulated Alumminium link,provision of inscription labels etc. (e) Suitable cable chamber with knock out holes, terminal blocks, interconnection materials etc.as required. (d) 400/5A or suitable rating Current Transformer(cappa/AE/pragati) with Multifunction Metering arrangement and phase indicator lamps, Name Plate, etc.as required. Note: General arrangement drawing should be got approved before fabrication and site inspected before quotating.

MAIN LIGHTING PANEL BOARD: Supply, Installation, Testing & Commissioning of cubical pattern Lighting power distribution panel, modular compartmentalized, floor/wall mounted type with 40X6 mm thick MS angle frame , 3 phase and neutral 6 Way MCCB power distribution board fabricated with suitable size, 14 SWG CRCA sheet powder coated/load/non-load bearings and earth bus consisting of the following as required: (a) Incomer:One chamber consisting of suitable size with mounting arrangements,supplying and fixing of 1no 4 pole 100A, 35kA MCCB (Make: Havalls/L&T/Legrand) (b) Out going MCCB: 6 Nos. 40 A, 35kA, 415 V, TP MCCB The above MCCB's should be Havalls/L&T/Legrand make and to be mounted in individual chambers consisting of suitable size with mounting arrangements. (c) Suitable front operated handle in MCCB's with auxillary contact and Suitable size insulated colour coded copper bus bars chamber along with copper earth bar for entire system. (d) Interconnection with suitable size insulated copper link,provision of inscription labels etc. (e) Suitable cable chamber with knock out holes, terminal blocks, interconnection materials etc.as required. (d) 100/5A or suitable rating Current Transformer(cappa/AE/pragati) with Multifunction Metering arrangement and phase indicator lamps, Name Plate, etc.as required. Note: General arrangement drawing should be got approved before fabrication and site inspected before quotating.

REMOVEL OF ELECTRICAL ITEMS: Removing the existing Main switch board, power board , old wires/cables with connections and old ms pipes, switch boards, light fittings, ceiling fans, & fixtures etc., and same can be Hand over as directed by dept, Engineer.

TWO POLE METAL ENCLOSURE WITH MCB: Supplying and fixing Two pole sheet steel enclosure on surface/recess alongwith 40A, 230V, "C" curve, 10kA, Two pole MCB complete with connections,testing and commissioning etc. as required. Make:- Legrand, L&T, Havalls

FOUR POLE MCB: Supplying and fixing of 63 amps rating, 440 volts, "C" curve, 25kA, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. MAKE: LEGRAND/L&T/HAVALLS 63A 4 pole MCB

FOUR POLE MCB: Supplying and fixing of 40 amps rating, 440 volts, "C" curve, 25kA, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. MAKE: LEGRAND/L&T/HAVALLS 40A 4 pole MCB

RJ 45 SOCKET: Supplying and fixing a suitable Modular type, flush PVC box for accommodating 1no. of CAT 6 computer jack with shutter with necessary crimping the socket, interconnections etc., as required. Make: LEGRAND/AMP/ D-LINK/ MK Blenze

LED PANEL LIGHT: Supply, Installation, testing and commissioning of Pre-wired LED fitting 36W/230V/6500K complete with all accessories etc., directly mounted on Gypsum/(2x2) false ceiling/ recess with suitable metal angle clamps including chain fixing, including earthing and connections with 1.5 sq.mm FRLS PVC insulated copper conductor three core cable etc., as required. Make: Havells/Crompton/ Philips

Making hole50mm in Wall : Making hole through wall & providing PVC pipe (50mm) for installation of AC outdoor unit pipe & cable by demolishing brick work manually and the same as good finishing of wall by plastering etc as required.

LED Linear Hanging Light fixture: Supply, Installation, testing and commissioning of Pre-wired Linear suspended LED light fitting (570mm X 50mm X 35mm) (36-40)W/230V/6500K complete with all accessories etc., directly suspended from ceiling with rope including rope fixing, including earthing and connections with 1.5 sq.mm FRLS PVC insulated copper conductor three core cable etc., as required. Make: Havells/Crompton/ Philips/Ankur/

Electrical items - Buy Back

BUYBACK OF OLD MV PANEL: Buy back of existing Old LT Panel consists of Switch fuse unit with individual compartment, Copper Busbars etc.

Instrumentation Items

Supply,Installation,Testing and commissioning 360 degree coverage ultra high sensitive conferencing tile microphone system with inbuilt amplifier and Inbuilt high defination digital signal processor with usb interface and mixer. 1.Mic Type Beamforming Ceiling Microphone Array with Dante for Conferencing and Sound Reinforcement Application 2.Deep Side lobe beamforming Deep side lobe beamforming for unparalleled sidelobe depth, below -40 dB for superior rejection of reverb and noise, even in difficult spaces for superb clarity and intangibility. 3.Frequency invariant gain response.100Hz to 20kHz 4.Acoustic echo cancellation 6G Acoustic echo cancellation for unparalleled beamforming duplex audio performance 5.Beam switching Mic should be able to switch two beams at the same time for picking up two speakers at same time. 6.Gain response variation True Frequency Invariant Beamformer: Gain response is unvarying across frequency 7.Software Configurable Beamwidths: Small, Medium and Large with Frequency Invariance 8.Beamforming Range Wideband Beamforming range from 100Hz to 20KHz 9.Acoustic Echo cancellation Support Built in Acoustic Echo Cancellation per beam and Noise Cancellation upto 25dB with option to configure at an increment of 1dB 10.Dynamic Frequency range Dynamic Range: 20 Hz to 20 KHz, > 70 dB

11.Configurable features Microphone shall offer built-in configurable functions such as Acoustic Echo Cancellation, Noise Cancellation, Filters, Automatic Level Control, Auto Mixer etc. 12.Number of Beams or lobs support: Number of Configurable Beams: 6, 8, 10, 11, or 12 13.Mic Coverage:Shall provide a full 360deg coverage of any room supporting different patterns such as Circle/Square, Rectangular and Semicircle Classroom type configurations 14.Dante to USB Connection: USB Type-C: USB 2.0 Device, Driverless 2x2 USB Audio and RJ-45 Jack: Dante network port, PoE 15.Dante :Should have 48KHz sample rate should have 24 Bits/Sample bit depth Should have 2 Transmit x 2 receiver channels 16.Mic coverage range: Single Microphone Array shall be configurable of Coverage Sizes from Small 10ftx10ft upto 36ftx20ft 17.Ceiling mount Height mic coverage support: Ceiling Mount Height shall be software configurable from 7ft to 20ft 18.Installation Type :shall support ceiling grid flush type, surface, and suspended column mount Installation methods, Shall support three different ceiling grid types: 24 in, 600 mm, and 625 mm 19.Inbuilt amplifier:Amplifier with 4 channels x 15watts each @ 8ohms or configurable to 2channels x 30watts @ 4ohms 20.Accessories: PoE Injector shall be included as necessary to support the Beamforming Mic Array 21.Network management: AV network management platform to monitor, control, and audit both DSP Mixer and Beamforming Microphone Array shall be included 22.Compatibility with Ceiling speakers Ceiling Tile Microphone and Ceiling speakers should be from the same OEM.

Supply,Installation,Testing and commissioning Power Supply 90W PoE++ 1. Voltage Compatibility : (VDC) 24-57 2.Input Frequency: 50/60 Hz 3.Number of Ports: 1 4.Side A - Connector 1: RJ45 (FEMALE) 5.PoE Type:3 PoE++/UPoE (60W, IEEE 802.3bt) 6.Operating Temperature Range:-49° to 167°F (-40° to 75°C) Storage Temperature Range -49° to 185°F (-40° to 85°C) 7.Network Compatibility: 1 Gbps (Gigabit) 8.IEEE Standards Supported: 802.3af; 802.3at; 802.3bt

Supply,Installation,Testing and commissioning USB TO DANTE HUB 1.CONNECTORS:USB C: USB 2.0 Device, Driverless 2x2 USB AudioRJ-45 Jack: Dante network port, PoE 2.POWER Power Input: USB 5 V or 802.3af PoE Power Consumption: 9 Watts (Max) 3.DANTE Sample Rate: 48 KHz,Bit Depth: 24 Bits/Sample,Channels: 2 Transmit X 2 Receive 4.USB CABLES:USB C to USB Type A: 20 cm (8 in) long ,USB C to USB C: 20 cm (8 in)long 5.Storage Temperature: -25 to +70 °C

Supply,Installation,Testing and commissioning 8 Port LAN Switch with PoE power 1.Device Interfaces: 8 or more Fast Ethernet with PoE+ LAN Ports 2.Switching capacity:1.6 Gbps switching fabric 3. Compliance:IEEE802.3az EEE power saving 4.Protocol:CSMA/CD 5.Media Interface Exchange : Auto MDI/MDIX adjustment for all ports 6.Packet Filtering: Ethernet: 14,880 pps per port and Fast Ethernet: 1,48,800 pps per port 7.Capability:It should be providing the network capability to all AV devices

HDMI Fiber Cable 10 Mtr Optical Fiber HDMI Cable 1.Product Type:Active Optical cable ( AOC) 2.Technology:HDMI 3.Cable TypeActive 4.Video Input:HDMI (MALE) 5.Video Output:HDMI (MALE) 6.Max Supported Video Resolution:3840 x 2160 (4K) @ 60Hz 7.Signal Range :15mtr 8.Max Supported Color Depth:48-bit Deep Color 9.HDR Support/Yes 10.3D Video SupportedYes 11.Chroma Sub Sampling: 0.169490740740741 12.Maximum Signal Range:49 (ft) 12.Audio Specification:Stereo Audio 13.Bus Powered:No 14.Connector Plating:Gold 15.Contact Plating:Gold 16.Latching or Gripping Connector:No

HDMI Fiber Cable 20 Mtr Optical Fiber HDMI Cable 1.Product Type:Active Optical cable ( AOC) 2.Technology:HDMI 3.Cable TypeActive 4.Video Input:HDMI (MALE) 5.Video Output:HDMI (MALE) 6.Max Supported Video Resolution:3840 x 2160 (4K) @ 60Hz 7.Signal Range :15mtr 8.Max Supported Color Depth:48-bit Deep Color 9.HDR Support/Yes 10.3D Video SupportedYes 11.Chroma Sub Sampling: 0.169490740740741 12.Maximum Signal Range:49 (ft) 12.Audio Specification:Stereo Audio 13.Bus Powered:No 14.Connector Plating:Gold 15.Contact Plating:Gold 16.Latching or Gripping Connector:No

HDMI Patch Cable 1.8 Mtr HDMI Patch Cable 1.Cable Type:Standard HDMI Type A 2.Cable Length: 1.8 m 3.Connectors Plated:24K Gold 4.Cable Jacket Material:PVC 5.Cable AWG:30 AWG 6.Cable O.D. 5.5 mm 7.Video Resolution Supported: 4K x 2K (Max) 8.Power Consumption: Max Signal Bandwidth:Up to 340MHz (10.2 Gbps) 9.Maximum 256 mA

Shielded Lan cable 1.Category : 6 SFTP Solid cable 2.Conductor : 23 AWG Multi-cores (Solid) 3.Conductor Meta : Bare Copper 4. Insulation Materia : HD-PE 5.Shield : Aluminum / Polyester Foil Tinned copper Braiding 6.Cable Diameter : 7.5 mm nominal

Shielded Lan Rj45 Connectors male 1.Connector : Shielded connectors 2. Bandwidth:Supports voice/data/video distribution applications up to 550 MHz 3.Standards: Meets all Cat6 TIA/EIA standards, Verified to EIA/TIA 568B.2 4. RoHS Compliant:Yes

Specker cable Nominal Area Of Cond.(sq.mm):2.5 Max.con.Resitance ohms: 39.0 Max Width (mm): 4.45 Thickness (nom):0.

USB Type C To USB Type A 1.8mtr Cable Type:Standard 480 mbps Speed Connector 1:USB Type C Connector 2:A type Cable:Round Compatible Devices:Mobile, Smart Watch, Tablet, Power Bank, Laptop Cable Length”1.5 m Core:TPE Connector One”USB Type C|Connector Two: A type Cable Speed:480 mbps

IT Items

CAT 6 UTP CABLE: Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required Make: FINOLEX/COMMSCOPE/NETGEAR

CPVC PIPE: Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm) Make: FINOLEX/SUPREME/PRECISION

48 PORT LAYER2 MANAGED PoE SWITCH WITH CONSOLE PORT: Supply, installation and commissioning of 48 port switch with console port inside the network rack. Make: HP/ARUBA

24 PORT PATCH PANEL: Supply, installation and commissioning of 24 port panel inside the network rack and rj45 cable termination in both end (Patch panel and Switch) Make: LEGRAND/MOLEX/COMMSCOPE

6 PORT LIU (FULLY LOADED): Supply, installation and commissioning of 6 port LIU switch with all accessories including fibre splicing and termination. Make: COMMSCOPE/NETGEAR/DLINK

9U NETWORK RACK (FULLY LOADED): Supply, installation and commissioning of 9U network rack on the wall with all accessories including power strip. Make: COMMSCOPE/NETGEAR/DLINK

WIFI 6E TRI-BAND ACCESS POINT: Supply, installation and commissioning of Wi-fi 6E tri-band access points Make: HP/ARUBA

NETWORK BACKBOX WITH SINGLE FACE PLATE AND RJ45 KEYSTONE JACK: Supply, installation and commissioning of Network backbox with single face plate and RJ45 keystone Jack. Termination of CAT 6 cable in both ends (Network box and Patch panel end with proper numbering.) Make: COMMSCOPE/NETGEAR/DLINK

2M CAT6 UTP CABLE: Supplying and installation of 2-meter category 6 UTP patch cable Make: COMMSCOPE/NETGEAR/DLINK

1M CAT6 UTP CABLE: Supplying and installation of 1-meter category 6 UTP patch cable Make: COMMSCOPE/NETGEAR/DLINK

SC-SC 1M FIBER PATCH CABLE: Supplying and installation of SC-SC 1-meter fiber patch cable Make: COMMSCOPE/NETGEAR/DLINK

SC-LC 1M FIBER PATCH CABLE: Supplying and installation of SC-LC 1-meter fiber patch cable Make: COMMSCOPE/NETGEAR/DLINK

SINGLE-MODE FIBER MODULE Supplying, installation and commissioning of single-mode fiber module. Make: HP/ARUBA

6-CORE FIBER CABLE Supplying, installation and commissioning of 6-core fiber cable inside the 25mm PVC conduit with required accessories and Termination & splicing of fiber core in the LIU. Make: FINOLEX/COMMSCOPE/MOLEX

75" Professional 4K UHD LED Display with High Brightness along with Wall Mount Kit 1. Diagonal Size: 75 Inch 2. Resolution: 3840x 2160 3. Minimum brightness: 500 Cd/m2 or better 4. Speaker: Built-in (20 Watts) 5. Input Connectivity: DP/HDMI 2.0 x 3, USB 2.0 x 2, Audio Out x 1 or more 6. IP Rating: IP5x or better 7. HDCP support: 2.2 8. Control: RJ 45 x 1, RS-232 In & Out x1, should be controllable from an external controller via IP/IR/RS232. 9. Operation Hours: 24 x 7 10. Direct/ Ease of viewing: Display must have Direct viewing of PPT, Word, PDF, Images & Videos from USB Drive 11. Mount: Wall mount kit (Included) 12. Accessories: all cables and accessories.

2K FHD Broadcasting quality AI Tracking PTZ Camera with 20x Optical Zoom 60 degree FOV with paralell SDI & HDMI video outputs with RS232/DVIP ports 1.Video format: 1080p 60/59.94/50/30/29.97/25, 1080i 60/59.94/50, 720p 60/59.94/50 2.Video Output: HDMI x 1 & SDI x 1 3.Tally LED: Dual color (Red, Green) 4.Image Sensor: 1/2.8-inch-high quality HD CMOS sensor 5.Effective Pixels (approx.):2.07 Mega pixels 6.S/N Ratio: >55dB 7.Min. Illumination0.5Lux (F1.8, AGC ON) 8.Electronic Shutter: Auto / Manual 9.Zoom Ratio:20x Optical zoom and 10X Digital Zoom 10.Gamma Control: Off / Normal 11.Iris Control: Auto/Manual 12.Digital Noise Reductions:yes 13.On-Screen Display (OSD): English 14.White Balance:AWB / MWB / One push WB / Outdoor / Indoor / Fluorescent 15.AGC / Gain Control: Auto / Manual Max. Gain Limit

16.Mirror/ Flip Image Yes 17.Preset:255 Position 18.Focal Length f=5.2 (wide) to 98 (tele) mm, F1.6 to F3.5 19.Focus Mode: Auto / Manual 20.Panning/Tilting Range Pan: 340°, Tilt: +90° to -30° 21.Panning/Tilting Speed Manual: 1~60°/Sec Swing: 1~30°/Sec 22.Field of View (Horizontal, Wide): Approx. 54.7° (WIDE END) / 3.3° (TELE END) 23.Image Compensation: Backlight Compensation 24.Protocol: VISCA/Pelco-D/Pelco-P; Baud, Rate:115200/38400/4800/2400bps DVIP 25.Remote Control Interface and Transmit Distance RJ-45: for IP control (DVIP), RS-232, RS-422 26.Power Supply: Provide power cable for operations on Indian standard power supply condition 27.Key Features:IR Control 28.Numbers of Preset Should have 255 or more programmable position presets including pan, tilt and zoom positions 29.Color Dual color Tally Light Red Green 30.Compatibility with Presentation Switcher The tracking camera and the presentation switcher should be from the same OEM

Video Collaboration System with 16 GB RAM, 512 ROM and WIN 11 Pro OS 1. Codec Type: Cloud VC Codec 2. UC Engine: Intel Core® processor with Windows® 11 OS 3. Codec Interface: Capability to integrate the external Audio, Camera, and Display system 4. Codec Output: HDMI x 2 or more, USB 2.0 & USB 3.0 as required for integration 5. Codec Hard Drive: 512 GB SSD built-in or more 6. Codec RAM: 16 GB DDR4 or more 7. Codec Processor: i7 intel 12th generation or better 8. Codec Connectivity: LAN 9. Codec Form Factor: Mini-PC with Compact Form Factor 10. Control: 10” or above Wired Controller 11. Licenses: Licenses for Legacy codec as well as cloud VC system for one year should be included

Professional Video Streamer (Presentation Switcher) 1. Video Standard: 4K & HD 2. Video Format Input: 3840x2160p: 30/29.97/25/24/23.98 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50, 720p: 60/59.94/50 525i59.94 NTSC, 625i50 PAL Output: HDMI 3840x2160p: 30/29.97/25 1080p: 60/59.94/50/30/29.97/25/24/23.98 UVC 3840x2160p: 30/29.97/25 1080p60/59.94/50/30/29.97/25 720p60/59.94/50 3. Video Processing 4K, 2K/30 4:4:4, 8bit 4. Video Input: 2 x HDMI 1.4 5. Computer Graphic Interface 2 via HDMI 6. Video Output. 1 x HDMI 1.4 1 x USB 3.0 Type C (UVC) 7. Down-Converted Output Yes 8. Analogue Audio Input 2 x 3 Pin XLR / 1/4” (6.3mm) Combo Socket 9. Analogue Audio Output 1 x Stereo RCA set (L/R) 1 x Stereo headphone 10. Digital Embedded Audio Support Input 2 channels, Output 2 channels

11. Audio Delay Calibration Up to 170ms 12. A+V Switching: Yes 13. Picture in Picture: 1 14. Effects: Cut 15. Camera Control: DVIP/ RS-422/ RS-232 16. Built-in Audio Mixer: Yes 17. Special Features: 7" Touchscreen Display 18. Chassis: Unibody 19. Power: DC 12V 18.7W 20. Operating Temp. Range 0~40 °C 21. Compatibility with Camera: The presentation switcher and the tracking camera should be from the same OEM

JPS Constructions (BID ID -902192)