Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER TO AWARDED THE WORK | |
| 2 | L2₹63.8 L+₹7.4 L (13.1%)Rejected-Finance | L2 | Rejected-Finance L2 Bidder | |
| 3 | L3₹67.6 L+₹11.1 L (19.7%)Rejected-Finance VILLAGE CHAKNOL P O DEORI KHANETI TEHSIL KOTKHAI DISTT SHIMLA H P | KOTKHAI | SHIMLA | HIMACHAL PRADESH | L3 | Rejected-Finance L3 Bidder |
Tender Value
₹62.7 L
EMD Value
₹95,300
Closing Date
6 Dec 2021, 6:00 pmClosed
EE Kotkhai
Division HPPWD Kotkhai
M/T in K.M. 0/00 to 1/212
2021_PWD_54152_1
PW-KD-E-Tender/2021-22-4818-20 dt 18-11-2020
Open Tender
Civil Works
Item Rate
60 days
Division kotkhai
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,000
₹95,300
21 Dec 2023
30 Nov 2021
7 Dec 2021
30 Nov 2021
6 Dec 2021
30 Nov 2021
Amount
WBM Grading -III : Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming , stone screening /binding materials to fill-up the interstices coarse aggregate, watering and compacting to the required density Grading -III as per Technical Specification Clause 405. including carriage of materials, labour and equipments to various location of site of work through all modes of transportation in all leads, lifts and all incidental charges..
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90-1.02kg/sqm using mechanical means as per Technical Specification Clause 502 as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per square metre on the prepared granular surface and cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 by mechanical means as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.
Providing and laying 30 mm thick bitumenious concretewith 100-120 TPH capacity batchtype computrised HMP producing an avarage out put oof 75 tonne per hour using crushed aggrigate of specified grading II premixed with VG-30 bitumenious binder as per job mix formula with minimum binder concrete of 5.4%to 5.6% of total weight of mix and filler,transportingthe hot mix to work site laying with hydro static paver finisher with sensor control to the required grade level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the disered compction as per MORTH & Hspecification clause No. 509 complete in all respect including all leads and lifts as per directions of Engineer in Chargec
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-B using bitumen VG-10 (ten)as per Technical Specification Clause 510 (Five hundred Ten)including carriage of materials, labour and equipments to various location of site of work through all modes of transportation in all leads, lifts and all incidental charges.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.8 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
M/s Pardeep Sublaik
Pankaj Chauhan
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .