Karnataka

Active

Works

Buildings

Providing and fixing SS Truss with Glass roofing for meeting room staircase, Truss work for Meeting room front & Renovation works for Meeting Hall, Board room, Electrical room, Construction of Pantry and Dormitory at FF room and Construction of block work (Main gate to PMS Section) of KSPH & IDCL, Bangalore

Karnataka State Police Housing and Infrastructure Development Corporation Limited

KSPHIDCL Contracts Section Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹41.4 LCloses: 4 Jul 20267d left

Tender Value

₹41.4 L

EMD Value

₹83,000

Closing Date

4 Jul 2026, 11:00 pm7d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Karnataka State Police Housing and Infrastructure Development Corporation Limited

Work Description

Providing and fixing SS Truss with Glass roofing for meeting room staircase, Truss work for Meeting room front & Renovation works for Meeting Hall, Board room, Electrical room, Construction of Pantry and Dormitory at FF room and Construction of block work (Main gate to PMS Section) of KSPH & IDCL, Bangalore

Tender Information

Tender ID

308389

Reference Number

KSPHIDCL/2026-27/BD/WORK_INDENT456

Tender Type

Open

Product Category

Buildings

Location

KSPHIDCL Contracts Section Bengaluru

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredKSPH & IDCL Registration Certificate

RequiredClass-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings

RequiredIncome Tax returns & PAN

RequiredEPF Registration Certificate

RequiredWork Done Certificate - ITT 3.2 b Similar nature Work done certificate

RequiredLiquid assets and availability of credit facilities

RequiredTurnover Certificate - ITT 3.2 a

Required1.3.of Section-3 Qualification Information

Required1.4.of Section-3 Qualification Information

Required1.6.of Section-3 Qualification Information

RequiredGST Registration Certificate

RequiredExecuted minimum quantities of work - ITT 3.2 c

RequiredNon Refundable Transaction fee of Rs.20,000/- in the form of DD in favour of KSPH & IDCL Own Funds

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender document is part and parcel of the agreement

The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any

The bidder shall study the Tender document Carefully and quote the rates

Drawings uploaded are only for Tender Purpose only

The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices

The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence

The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act

Remittance towards PF shall be commensurate with the labour component of the work involved

The Bidder shall remit PF of labourers to Bidders permanent PF code number only

The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved

The contractor shall obtain insurance coverage for all the workers deployed for this work

Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only

Tender amount of Rs.4138652.77 is inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST

The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. GST shall be paid to the tendered amount separately. The Contractor should submit the tax invoice along with RA Bills

The bidder should furnish the documents relating to registration of GST

The bidder should furnish the valid address, phone number & e mail ID

Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117

The Bidder has to make payment of Rs. 20,000/- (Rupees Twenty Thousand Only) inclusive of GST as transaction Fee (Nonrefundable) in the form of DD payable to KSPH & IDCL (Own Fund) and the bidder has to upload the scanned copy of the DD in the Karnataka Public Procurement web portal towards transaction Fee. The original DD should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No. 59, Richmond Road, Bangalore- 560 025 On or before the Last date of receipt of tender for verification and the non-compliance of the same leads to the rejection of the bid.

Technical Criteria

Past Experience

1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2021-22 to 2025-26)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2 (c) : Quantities of work executed as prime contractor (in the same name) during the last five years (2021-22 to 2025-26)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2021-22 to 2025-26): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs. 20.69 Lakhs

Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent.

ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs. .....in any one year (Not applicable)

Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded -NA

3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. ----- Lakhs in any one year (Not applicable)

Others -- Work done certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded-NA

1.4 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

1.6 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2021-22 to 2025-26)

Others -- Profit & Loss Statement from Registered Chartered Accountant

Capabilities of Vendor

Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings

Others -- Valid Registration Certificate issued by respective Depts

Be Registered with KSPH & IDCL

Others -- Valid Registration Certificate issued by KSPH&IDCL

Be Registered with GST

Others -- Valid Registration Certificate issued by Competent Authority

Income Tax returns & PAN

Others -- Income Tax returns and PAN certificates

Be Registered with EPF Authorities

Others -- EPF Registration Certificate

ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.12.50 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional)

Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement

ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2021-22 to 2025-26 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document)

Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent.

Financial Status

ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2021-22 to 2025-26: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.41.38 Lakhs

Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number

Others

1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded.

Others -- Organization Chart & Company Profile

Fee & Financial Details

Tender Fee Amount

₹1,040

EMD Fee Amount

₹83,000

Important Dates

Last Activity

20 Jun 2026

Published

20 Jun 2026

Bid Opening

7 Jul 2026

Download Ends

25 Jun 2026

BOQ Preview

•

Providing and fixing SS Truss with Glass roofing for meeting room staircase, Truss work for Meeting room front & Renovation works for Meeting Hall, Board room, Electrical room, Construction of Pantry and Dormitory at FF room and Construction of block work ( Main gate to PMS Section) of KSPH & IDCL, Bangalore.

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per directi...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

•

Removing & Resetting - Removing and resetting of precast kerb stones fixed with CM 1:3 fixed and finished in line as per direction of Engineer in charge. (The cost of PCC shall be ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, s...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design

•

and of approved make conforming to IS:8931.

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy

•

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & a...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm

•

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm

•

Providing and fixing 2mm thick 16 to 19mm wide pvC edge binding tape of approved quality for cupboard/wardrobe/kitchen shutters including necessary synthetic resin hot pres...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing 12 mm toughened glass for existing MS Structure including all fixtures etc., complete with all lead, lifts, loading, unloading and transportation etc complete as per the direction...

•

Supply and fixing of 3m Sun film of 1 way view or frosted of good quality with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, tes...

•

Providing and fixing 8 mm toughened glass for existing UPVC Frame including all fixtures etc., complete with all lead, lifts, loading, unloading and transportation etc complete as per the direction of...

•

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames wrought, framed or assembled including making plaster groves including cost of materials, labour, usage c...

•

Teak wood beading with all lead, lifts, loading, unloading and transportation etc complete as per the direction of Engineer in Charge

•

Providing and fixing Brass hinges of approved make as per direction of engineer in charge

•

Providing and fixing Brass door handle of approved make as per direction of engineer in charge

•

Providing and fixing DOOR CLOSER Make Godrej s per direction of engineer in charge

•

Blacksmith, Stone cutting, Mason or Brick Layer Class I Carpenter Class I Plumber Tin smith Foreman, Sarang, Painter, Fitter Class I Mechanic Class I Pneumatic drilled, Engine Driver, Gas or Electric ...

•

Cleaner, Asphalt sprayer, Driller, Savgani or chavli, White Washer, Colour Washer, Sawyer, Helper to Fitter, Gardener, Cook, Dhobi, Care taker, Hammer man, Lift Operator, Bamboo maker, Helper to Carpe...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including ne...

•

Providing and fixing carpet rolls including cost of all materials with all lead and lift, loading and unloading and transportation etc complete as per the direction of engineer in charg

•

Providing and fixing carpet tiles including cost of all materials with all lead and lift, loading and unloading and transportation etc complete as per the direction of engineer in charge

•

Providing & Applying Royal Luxury Emulsion Paint for wall & ceiling of approved quality to give an even shade, after thoroughly including preparing the surface even and sand paper smooth, primer, touc...

•

Providing and laying Vitrified tiles with thickness 200 X 1200 RAK Make Tiles including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge

•

Providing and fixing Double shutter glass door of 12mm thick plain toughened glass. The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arra...

•

Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dus...

•

Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge

•

Transporatation or earth on suraface for 30Kms with all lead and lift, loading and unloading and transportation etc complete as per the direction of Engineer in Charge. - as per directions of engineer...

•

Removing UPVC partitions, UPVC windows, wall panelling, alumnium partition etc., with all lead and lift, loading and unloading and transportation etc complete as per the direction of Engineer in Charg...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Steel Two Tier Cot of overall size 87''L X 30''W X 78''H The verticals shall be made out of 38mm square MS tube of 16G thick on all the four corners & 19mm square MS in between. A single CRCA sheet of...

•

Sleepwell Starlite Discover 4-inch Firm Single Size Foam Mattress (72*30*4 Inches) including Micro Fibre Sleeping Pillow (16x24 inch) / (40.64x60.96cm) and bed spread complete and as per the direction...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Electrical estimate for Providing and fixing SS Truss with Glass roofing for meeting room staircase, Truss work for Meeting room front & Renovation works for Meeting Hall, Board room, Electrical room, Construction of Pantry and Dormitory at FF room and Construction of block work ( Main gate to PMS Section) of KSPH & IDCL, Bangalore.

•

Supplying heavy gauge open PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction

•

boxes, adhesive paste etc., and running before concreting the slab. The...

•

Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. i) 6 Amps one w...

•

Supplying installation testing & commissioning of decorative fan with remote.

•

Supplying & Laying mtr HDMI cable for projector kit as per directons of engineer in charge of the work.

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

•

Supplying wall mounting fan suitable tooperate at single-phase 230v AC. supply. 300 mm sweep

•

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S''hook with fan regulator to the existing board together

•

with supplying and fixing 5A. ceilingrose, necessary lengt...

•

Supplying exhaust fan of 1440 RPM of 300 mm (12"") size with bracket blades complete for light duty suitable to operate on 230V

•

50Hz, AC Supply ,as per directions of engineer incharge of the work.

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076

•

inch PVC insulated twin core wire. ,as per directions of engi...

•

Supplying of 22w Aluminium batten LED tube light

•

Fixing all types and all capacities of LED light fittings indoor on the wall / ceiling /

•

rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks , holder wi...

•

Supplying & fixing of LED bulb 12 watt

•

Supplying And fixing of Holder

•

Supplying and fixing surface/flush mounting unbreakable PVC

•

modular box suitable formountingmodular switchplateswithdue

•

groove cutting inBrick/C.Cwall, including necessary rawl plugs,

•

Machine/NF screw...

•

Supplying and fixing surface/flush mounting unbreakable PVC

•

modular box suitable formountingmodular switchplateswithdue

•

groove cutting inBrick/C.Cwall, including necessary rawl plugs,

•

Machine/NF screw...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Bid Doc WI-456.pdf

Tender Document • 1.25 MB

Head office drawing.pdf

Others - Drawing • 2.17 MB

Make List Civil and Electrical.pdf

Others - Make list • 1.02 MB

Ready to Participate?

Download all tender documents and submit your bid