Salem District P.N.Patty Town Panchayat 2024-25 General Fund

Amount

Earth work excavation for foundation in all soils and sub-soil to full depth as may be directed except in hard rock requiring blastering including shoring, timbering,strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in 15cm. Layers, well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with initial leads and lifts etc. including leveling the site complete complying with standard specifications and as directed.

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ¼” x 4 ¼ “x 3” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29m high for plane surfaces such as RCC Slabs,Rectangular beams,Tee (or) ELL beams,Lintels,bed block,slabs,landing beam,canopy side slab,or boxing (or)vertical slabs,rectangular (or) square(or)round columnsetc.,as detailed below with all cross bracings using M.S Sheets of size 90cmx60cm and B.G 10 Stiffended with welded M.S.Angles of size25mmx25x3mm for boarding laid over silver oak(or)country wood joist of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13 cm dia spaced out 75 cm centre to centre or at suitable intervals etc.,complete complying with std.specification

Ground Level

Roof Centering

Lintel Centering

For Vertical column

Supply and fabrication and placing in position of TMT steel roads to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc.,including cost and conveyance of all materials to site and all labour charges etc.,complete Complying with Standard Specification as per TNDSS No.97 V,VI (S6) VII (S6) VII-3,

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Up to Basement

Ground Floor Level

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete complying with std. specifications.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works ) ( TNSS NO or NBC No 61 V VI (54) 3)

Ellis Pattern flooring with 20mm thick in Cement Concrete 1:2:4 Mix using 10 to 12 mm Stone Jelly Chips and top surfaces rented smooth in Cement – 10m2 ( no sand to be used ) as directed Complying with standard specifications

Supplying and Painting the walls with two coats of Emulsion paint over one of cement primer with good quality of approved cement paint including preparation of surface ,cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVC insulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with T.W. switch box and 5Amps Flush Type Switch and making good of the concealed portion with suitable colour for PVC concealed LIGHT point. (for bath,toilet and pumps etc ) (SD 26)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube..( S.D.89 )

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.etc, complete as per standard specifications SD 54

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. Complying with Standard Specifications as per SS 20 B TNDSS No. 23 & 24 V,VI,S2

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications as per TNDSS No. 28 V, VI (S2) (S5A) VII

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using M.S Sheets of size 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification as per TNDSS No.90(S3),86,86A,V,VI,(S3),VII (For Drain,Deck slab & Retainingwall)

Centering Below 1.00m height

Centering Abow 1.00m height

Plain Cement Concrete 1:3:6 Mix (one part cement, three part Crushed Stone Sand and six part of aggrigate) using 40% of 40mm size and 60% of 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steelpipe of 1.60mm thick at required locations to a height of900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at900mm centre with 2 Nos. of 25mm dia intermediatehorizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Senthil & co., (BID ID -1177043)